Social Feed

B
Last reply · posted in DISH Network Support Forum
Hey guys. since im up in the great white north the new dish 500+ and 1000+ are hard to find besides buying online. went to my local dealer. I turned a starchoice into a dish 500+. Now the problem is after a check switch, the unit is finding ( With SW31 switch) 61.5 Port A, 110 Port B, 118Port c. Its not seeing 119 for some reason. I Used a friends FTA to point the dish ( easier then dish IRD) and i know for a fact that the fta was working on both 119 and 118 so anyone got any tips of were i went wrong, or what im missing? Thanks folks!
5 Replies · 2009 views
Pepper
sorry, a legit dish receiver won't work with that combined 118/119 unit the pirates use. 119 and 118 need to be on separate lines to a DPP44 switch.

also, I never heard of a SW31, a dish receiver probably hasn't either.
H
also, I never heard of a SW31, a dish receiver probably hasn't either.
Now you have.;)
SW31 Switch : MX-MART, , Maximize Your Saving on Home Electronics!
apollog
Port 1- 119, port 2 -110, port 3- 61.5 and port 4- 118 Install the lines in that order.
B
From what i had read i was under the impression that the new LNB for 118 Was supposed to have one out for both 119/118 signal. Its a dual Out so mabie i should have tried the other output. Also all day my switch has been acting wonky. I've done about 5 check switch's and every time i do, it comes up with different results ( the sats r in different ports).

I took down the Makeshift dish1000 and put my normal dish500 back up for now so i can watch all the channels i sub to.

Without Buying a Dish 500+ or 1000+ is there any way i can get this setup now without dishing out another truck of cash lol?
B
k did a bit more reading and looks like your right. It wont work with real IRD, only fta. So i guess my next question is how would i go about hooking up 118,119,110,61.5 to a switch for 1 Receiver. Keep in mind the LNB are all legacy type.

I can just peak an extra dish for 118 only, my dish 500 for 110/119 and another wing dish for 61.5
Works fine for me, i just dont know what switch to use for this setup.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68685 Replies · 2681576 views
  • Like
Reactions: c-spand
sdfntx
Safe In My Garden - The Mamas & The Papas
long_time_Dish
Mary Shut The Garden Door - Donald Fagen
  • Like
Reactions: Bobby
dishstaller
The Wind Cries Mary - Jimi Hendrix
long_time_Dish
Lonely Wind - Kansas
dishstaller
Lonely is the Night - Billy Squier
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club
:mad::mad::mad::mad:

Pissed off at the crappy healthcare costs

My health Insurance renewal for 2027 just came in. Going from $827 a month to $1,187 a month. Deductible going up a $1k to $9,350. Max out of pocket also going up $1k to $11,000. Doctor co-pay of $40. Urgent Care co-pay $50. ER 50% coinsurance after deductible. That's all in network. Out of network is double, should it be needed.

Have to think about this. I'm really tempted to just go without now. I only go to the doctor once or twice a year. I pay out of pocket for Tirzepitide and can do without the Rosuvastatin (crestor) now. Really tired of spending over $10k a year and getting nothing out of it.

After years with Blue Cross I switched last year to Ambetter as my Blue Cross premium was going from $1200 to $1800 for a Silver plan and the Bronze plan was still going to be $1300 at BCBS. Ambetter was $827 for the same coverage with a Bronze plan. Didn't think it would jump this much so soon.

I'm guessing a Silver plan is probably over $2,000 a month for 2027.
21 Replies · 271 views
  • Sad
Reactions: AZ.
vazhog
that cut is only for illegals to get off the rolls and I was being sarcastic before -
harshness
that cut is only for illegals to get off the rolls and I was being sarcastic before -
That's not who it is for. The cut is for those who won't work (though you typically had to prove that you couldn't work to get it in the first place).
  • Like
Reactions: AZ. and osu1991
Foxbat
Why isn't this Political thread over in the Pit? This is why there is a Pit, and why I rarely use the Chit Chat Club. But someone said, "The Pub is Elitist since you have to pay dues to enter, so please post in the Chit Chat forum so more guests can read and participate."
osu1991
Why isn't this Political thread over in the Pit? This is why there is a Pit, and why I rarely use the Chit Chat Club. But someone said, "The Pub is Elitist since you have to pay dues to enter, so please post in the Chit Chat forum so more guests can read and participate."
I didn't start it as a political statement and have no interest in the political BS of this country. Everyone wants to make everything political nowadays. This was just my rant over the outrageous increase in my premiums and how unaffordable healthcare is becoming to the average person here.

admin can close or delete it if they don't want here.
  • Like
Reactions: AZ.
Bobby
Why isn't this Political thread over in the Pit? This is why there is a Pit, and why I rarely use the Chit Chat Club. But someone said, "The Pub is Elitist since you have to pay dues to enter, so please post in the Chit Chat forum so more guests can read and participate."
There are no dues to be paid to be in the Pit. You just have to use the password which is clearly shown when you try to log in to it.
  • Like
Reactions: dishstaller
dishstaller
Everyone wants to make everything political nowadays.

Yes.....they do. Which is why I am very careful when at a customer's house these days....you NEVER know what is going to set someone off. Polite dialog is a thing of the past.....which is why I like my dog so much :)
  • Like
Reactions: osu1991
dishdude
That's not who it is for. The cut is for those who won't work (though you typically had to prove that you couldn't work to get it in the first place).

Which makes zero sense. If they are healthy and able to work but won't, they aren't using any health resources up.
  • Like
Reactions: Bobby and NYDutch
navychop
Until a runaway pickle truck hits them.
dishdude
Until a runaway pickle truck hits them.

I'm sure Vlasic has good insurance!
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SiriusXM Satellite Radio
Some of the channels start next week.

4 Replies · 186 views
comfortably_numb
My favorite is probably Holiday Pops.
TRG
TRG
It's not even Halloween yet.
  • Haha
Reactions: Howard Simmons
Scott Greczkowski
I like the Jimmy Fallon channel. This will be its third year. I like that it's all fresh each year. Also fun when he pops on live from time to time.
Don in CT
My favorite is probably Holiday Pops.
So it's a drunk father telling his in-laws to leave.
  • Haha
Reactions: comfortably_numb
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
I figured some of the guys would be looking here for an answer. You'll need to use this link

I'll mention what happened over there. I don't want to cause Scott any issues or put him in a bad spot.
7 Replies · 260 views
dishstaller
If any of you know some of the guys from the board and you have their contact info, please reach out to them....many failed to update their contact info and some even had starband email addresses.
  • Like
Reactions: charlesrshell
Scott Greczkowski
I figured some of the guys would be looking here for an answer. You'll need to use this link

I'll mention what happened over there. I don't want to cause Scott any issues or put him in a bad spot.
Now I have to go check out what happened now. Lol!
  • Like
Reactions: charlesrshell
Scott Greczkowski
Went and looked, not too bad...

Just let people know the address is satelliteretailer.com as DishRetailer.COM is not working. :)
  • Like
Reactions: charlesrshell
(((Garyd)))
If any of you know some of the guys from the board and you have their contact info, please reach out to them....many failed to update their contact info and some even had starband email addresses.
Your old link triggered my Bitdefender today.
  • Like
Reactions: charlesrshell
(((Garyd)))
Now I have to go check out what happened now. Lol!
I had a direct link to ]Political, thought provoking and debatable but now have to go in the main section or I get a warning on my Bitdefender
  • Like
Reactions: charlesrshell
dishstaller
Now I have to go check out what happened now. Lol!
I sent you a PM Scott. Doesn't really make any sense to me BUT....I've never claimed to be the sharpest knife in the drawer....though I just might be the most persistent. :baby
  • Like
Reactions: charlesrshell
Scott Greczkowski
I sent you a PM Scott. Doesn't really make any sense to me BUT....I've never claimed to be the sharpest knife in the drawer....though I just might be the most persistent. :baby
Its an automated bot. Explained it to you in the PM.
  • Like
Reactions: charlesrshell
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club

The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.


:eek


It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
117 Replies · 1159 views
meStevo

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
harshness
If it weren't for the sky-high electricity prices...

Of course, the real scare with Winter coming is the insane cost of heating oil.
  • Sad
Reactions: Jimbo
osu1991

GM said its next-generation vehicle architecture will provide 40 times more computing power and 30 percent less wiring than before and will expand from the 2028 Cadillac Escalade IQ to its high-volume SUVs, trucks, crossovers, and fourth-generation EVs, which will be powered by lithium manganese-rich (LMR) prismatic batteries

Despite the politicization and perceived consumer pivot away from EVs in America, GM needs to remain globally competitive, so it's doubling down on its fourth generation EVs, with energy-dense, cheaper-to-manufacture LMR batteries, more efficient motors, and state-of-the-art centralized computing architecture. With a stated goal of cutting the traditional four- to five-year concept-to-production time in half, GM is clearly challenging the concept of "China speed," which in the Chinese automotive industry can be as quick as 18 months from design to start of production. In the AI space, GM is smartly collapsing all of its marque-specific apps under the familiar OnStar brand, while providing more features—both on the phone and in the car—than it ever has before.
harshness
Let's tell it like it is. GM's EV efforts are coming from SAIC. The brain trust is almost entirely in China, and GM is hanging off of SAIC's shirt tails.

It is a lot like asserting that the Corvette was designed by Chevrolet when most of it came from the Cadillac CTS-V.
  • Like
Reactions: osu1991
T

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
That's how Ford did it- vertical integration. He even set up a rubber plantation in S. America
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 11 views
T
Last reply · posted in DISH Network Support Forum
I have Dish Hopper and Hopper Plus and also have Alexa Echo. I link the Alex skill to Dish and it asks me to enter the pairing code shown on the TV. I go into Dish Settings and there is no Alexa shown. Not sure what to do.
18 Replies · 881 views
  • Like
Reactions: tanman
navychop
Ungood.
  • Like
Reactions: charlesrshell
R
What is the purpose of connecting Alexa and the H3?
  • Like
Reactions: charlesrshell
navychop
Tell Alexa verbally what to do.
snissen
What is the purpose of connecting Alexa and the H3?
I stand up from my chair with my glass in one hand and my plate in the other, when a story I really want to hear comes on the TV. So I say, "Alexa, pause DISH", and it waits for me to return from the kitchen, at which time I say, "Alexa, resume DISH".

Or maybe, when I return with a full glass in one hand and a new plate in the other, I realize I forgot to pause to hear this good story from its start. So I say, "Alexa, skip DISH backwards 3 minutes", and I still get to catch the whole story.

I use this every day. Or until I acquire a third hand.
navychop
The Resurrectionists can help you with that.

For a price.
  • Like
Reactions: charlesrshell