Social Feed

Main Feed My Feed
Babadem
Babadem
Last reply · posted in Free To Air (FTA) Discussion

DGL-1189Q Universal Quad Circular/Linear LNBF

I just saw the Digiwave " DGL-1189Q Universal Quad Circular/Linear Poloarization LNBF" listed on Ebay and here. How good are they compared to the Invacom Quad?
Read more
8 Replies · 2576 views
Load Replies (8) Reply Legacy View
Anole
Anole
The specs look like it's a crappy-performing Universal LNB, with a wide enough front end to let in the higher frequency circular signals.
Since Circular are so powerful, they get through in spite of the fact the polarization is wrong.
It's unclear, but apparently all four outputs are the same.

Did you need a Universal?
Did you need a Quad?
Did you want to get Circular?
Maybe there's something else that'll fill your needs.

This is certainly nothing like the QPH-031, in operation nor sensitivity.
Read more
Reply
Babadem
Babadem
Anole said:
The specs look like it's a crappy-performing Universal LNB, with a wide enough front end to let in the higher frequency circular signals.
Since Circular are so powerful, they get through in spite of the fact the polarization is wrong.
It's unclear, but apparently all four outputs are the same.

Did you need a Universal?
Did you need a Quad?
Did you want to get Circular?
Maybe there's something else that'll fill your needs.

This is certainly nothing like the QPH-031, in operation nor sensitivity.
Click to expand...
The QPH-031 seems to fit what I want, but does the Invacom have a Universal/Circular LNBf? I would prefer a Universal/Circular combined not a Linear/Circular as the QPH-031 LNBf. Otherwise, I may have to do a 2LNB Motorized setup. One Circular and the other Universal.
Read more
Reply
Anole
Anole
You're right, the QPH-031 is Standard, not Universal.
Do you really need four outputs all the same?
Maybe some lesser version (two outputs?) of this Digiwave is available in Universal.
Hopefully with better specs.
Otherwise, I may have to do a 2LNB Motorized setup.
One Circular and the other Universal.
Click to expand...
Yea, I like that idea, too.
Then get the best Universal you can.
I have an SNH-031 by Invacom; it wasn't expensive

I don't have a lot of use/interest in Circular.
The one bird I can see that needs Universal, doesn't really have anything I want.
So, I'm not a big proponent of either. :D
Read more
Reply
andyb2
andyb2
I have the 1189s of this(2 outputs) and they are not all that good on linear sats.And all outputs are the same where the invacom is 2 of each.
Read more
Reply
Babadem
Babadem
Anole said:
You're right, the QPH-031 is Standard, not Universal.
Do you really need four outputs all the same?
Maybe some lesser version (two outputs?) of this Digiwave is available in Universal.
Hopefully with better specs.
Yea, I like that idea, too.
Then get the best Universal you can.
I have an SNH-031 by Invacom; it wasn't expensive

I don't have a lot of use/interest in Circular.
The one bird I can see that needs Universal, doesn't really have anything I want.
So, I'm not a big proponent of either. :D
Click to expand...
Thanks for the great suggestions, Anole!;):up
Read more
Reply
Babadem
Babadem
andyb2 said:
I have the 1189s of this(2 outputs) and they are not all that good on linear sats.And all outputs are the same where the invacom is 2 of each.
Click to expand...
:eek: I'm glad you gave me an account of your first hand knowledge, and experience. I will keep away from 1189Q.:up
Read more
Reply
View all replies (8)
M
mheisen
Last reply · posted in DISH Network Support Forum

Hopper 3 with Hopper plus internet connection problems

Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
Read more
10 Replies · 514 views
Load Replies (10) Reply Legacy View
Almighty1
Almighty1
mheisen said:
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
Click to expand...
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
Read more
Reply
  • Like
Reactions: charlesrshell
M
mheisen
Almighty1 said:
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
Click to expand...
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
Read more
Reply
  • Like
Reactions: charlesrshell
Almighty1
Almighty1
mheisen said:
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
Click to expand...
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
Read more
Reply
  • Like
Reactions: charlesrshell
S
slow_poke_pete
Almighty1 said:
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
Click to expand...
Might be worth just to ditch the hopper plus. No issues here on h713
Read more
Reply
  • Like
Reactions: charlesrshell
S
slow_poke_pete
mheisen said:
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
Click to expand...
Buy a roku and dump the hopper plus you'll be better off. If you have a smart tv you don't need either one. No hopper plus here and no issues!!!
Read more
Reply
  • Like
Reactions: MikeD-C05, navychop and charlesrshell
Almighty1
Almighty1
slow_poke_pete said:
Might be worth just to ditch the hopper plus. No issues here on h713
Click to expand...
I have a Hopper Plus and no issues either. charlesrshell has both a Hopper 3 with Hopper Plus and one without, he doesn't have the same issue. Before blaming it on the Hopper Plus, he should see if the problem still exists without the Hopper Plus connected as it could be the Internet connection itself or some setting in the router itself. There is someone in another thread who has EHD issues on the Hopper 3 only setup but does not have the EHD issues on the Hopper 3 with Hopper Plus and he has already tried swapping the EHD and it did not make a difference so like the saying, YMMV.
Read more
Reply
  • Like
Reactions: MikeD-C05 and charlesrshell
Almighty1
Almighty1
slow_poke_pete said:
Buy a roku and dump the hopper plus you'll be better off. If you have a smart tv you don't need either one. No hopper plus here and no issues!!!
Click to expand...
The Roku costs $$$, Hopper Plus is free. That may not be the only costs as it depends if the TV in question still has available HDMI ports and if not, it will require a HDMI switch and HDMI cable which adds more to the cost.

I have a LG 3D OLED Smart TV and I still need either of them because it does not have Android TV built in. Add a Hopper Plus and see if you actually have issues or not as until you actually tried it, it means nothing.
Read more
Reply
  • Like
Reactions: charlesrshell
jsmit86
jsmit86
If the OP has a router and a managed switch, that could be the problem.
I have a Hopper 3 and 5 Joey 4s. I recently updated my Router, Switch and access points with Ubiquiti UniFi gear. I had an issue where the switch interpreted the communication between the hopper internet connection and one of the Joeys as a data loop. I had to change some settings in the switch to re-enable that port. Your router could possibly be doing the same thing blocking the connection.

If your router has a malware connection setting, try disabling it temporarily, and see if the internet comes back. Contact your ISP and see if there is a block happening at the router or switch level, or via the ISP's threat protection.
Read more
Reply
  • Like
Reactions: charlesrshell
Almighty1
Almighty1
jsmit86 said:
If the OP has a router and a managed switch, that could be the problem.
I have a Hopper 3 and 5 Joey 4s. I recently updated my Router, Switch and access points with Ubiquiti UniFi gear. I had an issue where the switch interpreted the communication between the hopper internet connection and one of the Joeys as a data loop. I had to change some settings in the switch to re-enable that port. Your router could possibly be doing the same thing blocking the connection.

If your router has a malware connection setting, try disabling it temporarily, and see if the internet comes back. Contact your ISP and see if there is a block happening at the router or switch level, or via the ISP's threat protection.
Click to expand...
Can you share what settings you had to change?

Required Inbound & Outbound Network Ports
The standard ports designated for DISH Hopper configurations include:
    • TCP Port 80 – HTTP communication
    • TCP Port 443 – HTTPS secure communication
    • TCP Port 5678 – Neighbor Discovery / Device Sync
    • UDP Port 80 – Alternative streaming/network data
    • UDP Port 443 – Alternative secure media streams
    • UDP Port 5678 – Remote pairing and network discovery
Critical Network & Security Considerations
    • UPnP (Universal Plug and Play): Enabling UPnP on your router is the easiest way to allow the Hopper to automatically handle its own port maps.
    Internal Communication (MoCA & Local LAN): The Hopper Plus and Joeys communicate internally over your local home network using router's default internal traffic policies. Local firewall software or strict internal VLAN isolation can block the Hopper 3 from seeing the Hopper Plus or Joey extensions.

    The other thing is that these are streaming channels which was why I asked if they have worked correctly even without the Hopper Plus as checking the post history of the OP, it appears that the Hopper Plus was added around 1/2 a year ago and from looking at my own Internet settings portion, all the Hopper 3 does is really measure signal strenth for WiFi and probably just check ping times to show it is connected or not to the internet, it does not check the actual speed or latency. Since the OP has a Hopper Plus, OP can always install the Speedtest app for diagnostics and then take a photo of the results and post it here. Before 2017, I used tȯhave 6Mbps/768Kbps ADSL and even though the Hopper 1 and Hopper 3 also showed internet connectivity is okay, everytime my Ring Doorbell is uploading, it would knock the entire internet connection off-line as the upload pipe would be 100% filled by the Ring Door bell uploading the video because the ACKnowledgement packets would not have priority being sent back in time which was fixed with QoS traffic shaping but that still does not mean streaming will work as it requires at least 25Mbps minimum or more if there are other devices on the same connection sharing the bandwidth.


    ​
Read more
Reply
  • Like
Reactions: charlesrshell
jsmit86
jsmit86
Almighty1 said:
Can you share what settings you had to change?

Required Inbound & Outbound Network Ports
The standard ports designated for DISH Hopper configurations include:
    • TCP Port 80 – HTTP communication
    • TCP Port 443 – HTTPS secure communication
    • TCP Port 5678 – Neighbor Discovery / Device Sync
    • UDP Port 80 – Alternative streaming/network data
    • UDP Port 443 – Alternative secure media streams
    • UDP Port 5678 – Remote pairing and network discovery
Critical Network & Security Considerations
    • UPnP (Universal Plug and Play): Enabling UPnP on your router is the easiest way to allow the Hopper to automatically handle its own port maps.
    • Internal Communication (MoCA & Local LAN): The Hopper Plus and Joeys communicate internally over your local home network using router's default internal traffic policies. Local firewall software or strict internal VLAN isolation can block the Hopper 3 from seeing the Hopper Plus or Joey extensions.The other thing is that these are streaming channels which was why I asked if they have worked correctly even without the Hopper Plus as checking the post history of the OP, it appears that the Hopper Plus was added around 1/2 a year ago and from looking at my own Internet settings portion, all the Hopper 3 does is really measure signal strenth for WiFi and probably just check ping times to show it is connected or not to the internet, it does not check the actual speed or latency. Since the OP has a Hopper Plus, OP can always install the Speedtest app for diagnostics and then take a photo of the results and post it here. Before 2017, I used tȯhave 6Mbps/768Kbps ADSL and even though the Hopper 1 and Hopper 3 also showed internet connectivity is okay, everytime my Ring Doorbell is uploading, it would knock the entire internet connection off-line as the upload pipe would be 100% filled by the Ring Door bell uploading the video because the ACKnowledgement packets would not have priority being sent back in time which was fixed with QoS traffic shaping but that still does not mean streaming will work as it requires at least 25Mbps minimum or more if there are other devices on the same connection sharing the bandwidth.
Click to expand...
This was for port settings for the switch, not the router.

Originally was recommended to use EDGE vs. Infrastructure, but had to change that back to Infrastructure.

Had to leave STP (Spanning tree protocol) ON, but disable BPDU guard, and also had to disable Non-STP loop protection.

The previous settings were flagging normal dish system packets as a data loop, and fully blocked that port on the UniFI Pro Max 16 POE switch.

These were specific to my managed switch, and may not apply to the OP's issue.
Read more
Reply
Peter Parker
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum

DISH Hopper 3 Software Version 713 Is Out

No idea what improvements might be involved.
Read more
30 Replies · 1780 views
Load Replies (30) Reply Legacy View
  • Like
Reactions: LQQK and reubenray
rvvaquero
rvvaquero
That's a lot of information to ingest. However, I don't have the Hopper Plus and my 54 remote is doing crazy things to the Hopper 3. Several times each evening when I press the skip forward button several times to advance through a commercial, it switches the receiver either onto live TV or into suspension. Other buttons will also cause this randomly, I haven't established any patterns I can describe. I use "recall" to go back to my recorded program in progress.

Needless to say, something in the newer Hopper 3 softwares has caused the remote functioning to ......................malfunction. Evidently, it applies to third party remotes as well as DISH's own remotes.
Read more
Reply
  • Like
Reactions: long_time_Dish, charlesrshell and GRB1959
GRB1959
GRB1959
rvvaquero said:
That's a lot of information to ingest. However, I don't have the Hopper Plus and my 54 remote is doing crazy things to the Hopper 3. Several times each evening when I press the skip forward button several times to advance through a commercial, it switches the receiver either onto live TV or into suspension. Other buttons will also cause this randomly, I haven't established any patterns I can describe. I use "recall" to go back to my recorded program in progress.

Needless to say, something in the newer Hopper 3 softwares has caused the remote functioning to ......................malfunction. Evidently, it applies to third party remotes as well as DISH's own remotes.
Click to expand...

This is exactly the same issue I was having as I had the Hopper 3 and 54 remote without the Hopper Plus and the symptoms were virtually identical to yours.
Read more
Reply
  • Like
Reactions: charlesrshell
ERSanders
ERSanders
We have had a corolary problem in this and the prior s/w. Using several different 40.0 remotes (yeah, we're old), when one pauses a live or recorded show it becomes a crap shoot whether it will step foreward the 30" as requested, jump to the end, or restart the episode. Tried the famous 60" reboot to no avail and have decided to live with it vs. a receiver swap risk.
Read more
Reply
  • Like
Reactions: long_time_Dish and charlesrshell
T
tpribors
I think there's a change to the "skip forward 30 seconds". With CBS that does not have auto-skip, if you stack up a bunch of 30 second forwards it seems to stop when the kangaroo signaling the end of the commercial break appears.
Read more
Reply
  • Like
Reactions: Almighty1, ClarkGable, long_time_Dish and 3 others
long_time_Dish
long_time_Dish
Also posted this in the 3rd party remote thread.

My Hopper 3 updated itself to H713 last week and the IR issue is worse now. On H711, I could be on an SD channel for several hours and the IR side of my H3 would still be responsive without my having to tap the View button on my Pronto Pro every 15 minutes. Now, if I stay even on an SD channel without tapping the View button at least once an hour, it becomes unresponsive to my Pronto Pro without tapping the View button at least 5-20 times, just like on the HD and 4K channels. So, H713 actually made the issue worse. :(

brittanygarden
Read more
Reply
  • Like
Reactions: charlesrshell
View all replies (30)
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

RTX Spark Runs Linux... Kinda! #shorts

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/shorts/cVUsPJiCWU8


Direct YouTube Link - RTX Spark Runs Linux... Kinda! #shorts
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 6 views
Replies Reply Legacy View
WildBill
WildBill
· posted in DISH Network Support Forum

Problem with Amazon Prime Video

I've been having intermittent problems with Amazon Prime video programs loading using the H3 guide listing. I can get to the program I want to watch, but when I try to view it, it starts to load and then stalls. Eventually, a screen pops up saying "something went wrong, try again later". I've tried rebooting the hopper without success. Sometimes switching the HDMI input on my LG TV works, but not always. I don't have this problem on my phone or computer, so it is not a network or router issue.

I did a quick google search and found that this is a common problem associated with overloading or corruption of the data cache in the Amazon app and the solution is to clear the cache. Easy to do on a computer or phone, but I don't know how to do this on the H3. If anyone a solution or suggestion, I'd appreciate some help. Thanks.
Read more
0 Replies · 16 views
Replies Reply Legacy View
dfergie
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
Read more
5452 Replies · 336396 views
Load Replies (5452) Reply Legacy View
dfergie
dfergie
IMG_5955.webp

Sweet tea…
Read more
Reply
  • Like
Reactions: Bobby and TRG
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
Read more
Reply
  • Like
Reactions: Bobby
TRG
TRG
Breakfast for lunch. Crispy corned beef hash, home fries, two over easy eggs and sourdough toast.

1653.webp
Read more
Reply
  • Like
Reactions: dfergie, osu1991 and Bobby
TRG
TRG
Grabbed a burrito on the run. Beef, pinto beans, green chile and cheese. Stewart's cream soda.

burr.webp
Read more
Reply
  • Like
Reactions: Mr Tony and dfergie
dfergie
dfergie
Beef, bean green chile, cheese homemade burritos here... Water
Read more
Reply
  • Like
Reactions: TRG
View all replies (5452)
Scott Greczkowski
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
Read more
68707 Replies · 2683082 views
Load Replies (68707) Reply Legacy View
  • Like
Reactions: c-spand
dishstaller
dishstaller
The First Time Ever I Saw Your Face - Roberta Flack
Read more
Reply
  • Like
Reactions: RaiderPower and sdfntx
harshness
harshness
In the Still of the Night - The Five Satins
Read more
Reply
  • Like
Reactions: RaiderPower
Bobby
Bobby
I Still Haven't Found What I'm Looking For - David Cook
Read more
Reply
  • Like
Reactions: dishstaller
sdfntx
sdfntx
Looking for the Next Best Thing - Warren Zevon
Read more
Reply
long_time_Dish
long_time_Dish
Werewolves Of London - Warren Zevon
Read more
Reply
View all replies (68707)
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

How Are Missions Like Gimli Formed at the Planetary Science Institute? #shorts

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/shorts/HoQ-cCSZ7K4


Direct YouTube Link - How Are Missions Like Gimli Formed at the Planetary Science Institute? #shorts
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 4 views
Replies Reply Legacy View
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

TVs are really getting big these days

Was raining yesterday so I went to Sams up in Dothan to stock up on some things. Haven't been there in quite a while. I was amazed at how large most of the TVs were. When I walked in they had a 100 in Vizio (I think it was Vizio) that was marked down to something like $1,200. The first rows of TVs were all in the 80 in + sizes. The next couple of rows had the "smaller" models....those 75 and under. I was amazed at how small the 75s looked when lined up with the larger screens.
Read more
4 Replies · 54 views
Load Replies (4) Reply Legacy View
osu1991
osu1991
Q-LED and Mini LED panels have improved the picture quality and the tv's are so thin and nearly without bezels now. I've thought about replacing the 75in 4k DV/HDR LED Sony in my living room with a newer 86in. That's as big as I can go without construction changes. I watch the 75in 4k DV/HDR Q-LED in my bedroom and the difference between the two is very noticeable. There's nothing wrong with the living room tv though and I don't now that I actually watch enough anymore to really justify it. I could move it out to the patio but the 65in Q-LED out there looks really good and I'd have to change the mount to accomdate a larger tv out there.
Read more
Reply
  • Like
Reactions: dishstaller
Foxbat
Foxbat
I'm at a limit for TV sizes at this time. My Father-in-Law crafted a custom entertainment center for our family room and we were restricted from going too big based on the side cabinets and central bridge fitting in the width of the room. It turns out to be where a 55" screen with bezels fits but no 65" bezel-less screen can fit. I think there was a brief period where 58" screens where a thing, but no more.

So, no huge screens for the Foxbat's…
Read more
Reply
TRG
TRG
Foxbat said:
I'm at a limit for TV sizes at this time. My Father-in-Law crafted a custom entertainment center for our family room and we were restricted from going too big based on the side cabinets and central bridge fitting in the width of the room. It turns out to be where a 55" screen with bezels fits but no 65" bezel-less screen can fit. I think there was a brief period where 58" screens where a thing, but no more.

So, no huge screens for the Foxbat's…
Click to expand...

55" is plenty big.
Read more
Reply
dishstaller
dishstaller
TRG said:
55" is plenty big.
Click to expand...
And to think....I was SO proud of myself when I bought a 27 in TV in the late 80s. Everyone just had a 25 in so I was really in high cotton.
Read more
Reply
TRG
TRG
Pub Member / Supporter
· posted in The Chit Chat Club

Has anyone been to Wales?

I've pretty much done most things in Ireland and I'm thinking about the other side of the Irish sea. I'm thinking about traveling to Wales this summer. My second choice would be Scotland. I don't want anything to do with London except maybe landing in Heathrow and then escaping quickly.

Any tips or experiences to share?
Read more
0 Replies · 13 views
Replies Reply Legacy View
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

This Linux PC Packs Power Into a Shoebox

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=htIStYBn3KA


Direct YouTube Link - This Linux PC Packs Power Into a Shoebox
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 6 views
Replies Reply Legacy View
Load More
Top
Back