Social Feed

jcwyatt1
Last reply · posted in Free To Air (FTA) Discussion
So, I'm trying to get into FTA. I have moved into a house that already had DirecTV installed. I know the DirecTV was HD when it was in service.

So, here is my question... What do I need? I had a friend tell me that the DirecTV dish and LNB's would not work for FTA. Is this true or do you just need different LNB's for HD vs. SD? PLEASE CLARIFY!!

As far as a receiver, these are the features I want:

-HD
-PVR
-Dual Tuner
-Ability to watch two TVs would be nice
-At least 2 USB ports for hard drives

I know there is something called an "8psk" that I will need for HD, but I have no clue what it is or what it does. I have tried to do my research, but I am at wits end and I am afraid of wasting my money.

I am getting back my tax refund soon and want to spend it wisely.

Thanks for your help.
14 Replies · 2552 views
T
JC:
Speaking only of KU Band, You'll only get Fox and ABC affiliates in the Mountain States from Galaxy 18 that I know of..I just started into Ku Band Recently and am only on one Sat for the time being-Galaxy 18 West..Just to get an Idea, here is what I get on Galaxy 18-123 West

Galaxy 18 123 West Satellite Channel List (Ku Only)

(Channel Numbers represent The numbering system on my Fortec Dynamic Receiver)

1 KBTZ Fox Butte, Montana

2 WNYI Ithaca New York

4 KKTU ABC Cheyenne, Wyoming

5 KPBI MyNet Fort Smith, Arkansas

6 KMMF Fox Missoula, Montana

7 KXUN Univision Fort Smith Arkansas

11 WNGS ThisTV Springville, New York (Buffalo)

12 KWWF AMG Waterloo, Iowa

13 KFDF ThisTV Fort Smith, Arkansas

15 KEGS AMG Las Vegas, Nevada

16 KLMN Fox Great Falls, Montana

17 KUWF Univision Wicita Falls, Texas

18 KTVC AMG Eugene, Oregon

19 KQUP AMG Spokane, Washington

20 WMQF Fox Marquette, Michigan

21 WUMN Univision Minneapolis, Minnesota

22 KKYK Camden, Arkansas

23 KARZ MyNet Little Rock, Arkansas

24 KDEV-LP Aurora, Colorado

25 KWKO Univision Waco, Texas

26 WGMU MyNet Burlington, Vermont

27 WPXS Mount Vernon, Illinois

28 KUTF Telefutura Price, Utah

29 KATV ABC Little Rock, Arkansas

30 KCBU AMG Salt Lake City, Utah

31 KWBM MyNet Hollister, Missouri

32 Daystar

34 KTWO ABC Casper, Wyoming

45 3C-TV California Educational

46 3C Bulletin Board

48 Peace TV English/Arabic

54 Research Channel

55 UWTV University Of Washington TV (State of Washington)

This is a simple list I made for my wife..There are lots of good places to get more complete lists of this and other Satellites..Hope this helps you..

There are other channels not listed some are blank, others have picture and no sound which you will learn more about as you go along..
N6BY
JC:
Speaking only of KU Band, You'll only get Fox and ABC affiliates in the Mountain States from Galaxy 18 that I know of..
Yes. So if you want NBC and CBS you will need C-Band equipment and will have to aim your Dish at Galaxy 16 (99W).

The cool thing about Galaxy 16 C Band is that there are 2 NBC affiliates in different time zones -- WVGN (eastern) and KCWY (mountain). So you have a choice when to watch. And it also has WVXF (CBS), WPRU (ABC), and WSJX (FOX).

There is a combination C/KU band LNB available -- its the BSC621-2. I have one mounted to my 10 foot motorized Unimesh dish.

I picked up the dish used for only $75, but the motor, controller, and BSC621 LNB cost me about $300 additional.

Add in the cost of the receiver and you are looking at about $600 plus installation for a motorized C-Band system -- assuming you find someone who wants to get rid of a C-band dish. Otherwise, they're much more than $75 new.

Brett
eurosport
(Channel Numbers represent The numbering system on my Fortec Dynamic Receiver)

1 KBTZ Fox Butte, Montana

2 WNYI Ithaca New York

4 KKTU ABC Cheyenne, Wyoming

5 KPBI MyNet Fort Smith, Arkansas

6 KMMF Fox Missoula, Montana

7 KXUN Univision Fort Smith Arkansas

11 WNGS ThisTV Springville, New York (Buffalo)

12 KWWF AMG Waterloo, Iowa

13 KFDF ThisTV Fort Smith, Arkansas

15 KEGS AMG Las Vegas, Nevada

16 KLMN Fox Great Falls, Montana

17 KUWF Univision Wicita Falls, Texas

18 KTVC AMG Eugene, Oregon

19 KQUP AMG Spokane, Washington

20 WMQF Fox Marquette, Michigan

21 WUMN Univision Minneapolis, Minnesota

22 KKYK Camden, Arkansas

23 KARZ MyNet Little Rock, Arkansas

24 KDEV-LP Aurora, Colorado

25 KWKO Univision Waco, Texas

26 WGMU MyNet Burlington, Vermont

27 WPXS Mount Vernon, Illinois

28 KUTF Telefutura Price, Utah

29 KATV ABC Little Rock, Arkansas

30 KCBU AMG Salt Lake City, Utah

31 KWBM MyNet Hollister, Missouri

32 Daystar

34 KTWO ABC Casper, Wyoming

45 3C-TV California Educational

46 3C Bulletin Board

48 Peace TV English/Arabic

54 Research Channel

55 UWTV University Of Washington TV (State of Washington)
...What? ...No RetroJams???:eek:
T
...What? ...No RetroJams???:eek:


As I said above, this was a simplified list for my wife..Any blank or no-souind channels I didnt put on our list, though it just so happens that WNYI Ithaca, NY went fulltime Retrojams this week..
eurosport
Yeah, I forgot about that channel being AC3 since my receivers play it anyway.:)
boomer_106
Might wanna go dish hunting. See what you can find then, go from there.
WildBill
Last reply · posted in DISH Network Support Forum
I've been having intermittent problems with Amazon Prime video programs loading using the H3 guide listing. I can get to the program I want to watch, but when I try to view it, it starts to load and then stalls. Eventually, a screen pops up saying "something went wrong, try again later". I've tried rebooting the hopper without success. Sometimes switching the HDMI input on my LG TV works, but not always. I don't have this problem on my phone or computer, so it is not a network or router issue.

I did a quick google search and found that this is a common problem associated with overloading or corruption of the data cache in the Amazon app and the solution is to clear the cache. Easy to do on a computer or phone, but I don't know how to do this on the H3. If anyone a solution or suggestion, I'd appreciate some help. Thanks.
1 Replies · 16 views
R
I gave up trying to watch Prime through my H3 a long time ago.
M
Last reply · posted in DISH Network Support Forum
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
10 Replies · 514 views
Almighty1
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
  • Like
Reactions: charlesrshell
M
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
  • Like
Reactions: charlesrshell
Almighty1
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
  • Like
Reactions: charlesrshell
S
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
Might be worth just to ditch the hopper plus. No issues here on h713
  • Like
Reactions: charlesrshell
S
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
Buy a roku and dump the hopper plus you'll be better off. If you have a smart tv you don't need either one. No hopper plus here and no issues!!!
Almighty1
Might be worth just to ditch the hopper plus. No issues here on h713
I have a Hopper Plus and no issues either. charlesrshell has both a Hopper 3 with Hopper Plus and one without, he doesn't have the same issue. Before blaming it on the Hopper Plus, he should see if the problem still exists without the Hopper Plus connected as it could be the Internet connection itself or some setting in the router itself. There is someone in another thread who has EHD issues on the Hopper 3 only setup but does not have the EHD issues on the Hopper 3 with Hopper Plus and he has already tried swapping the EHD and it did not make a difference so like the saying, YMMV.
Almighty1
Buy a roku and dump the hopper plus you'll be better off. If you have a smart tv you don't need either one. No hopper plus here and no issues!!!
The Roku costs $$$, Hopper Plus is free. That may not be the only costs as it depends if the TV in question still has available HDMI ports and if not, it will require a HDMI switch and HDMI cable which adds more to the cost.

I have a LG 3D OLED Smart TV and I still need either of them because it does not have Android TV built in. Add a Hopper Plus and see if you actually have issues or not as until you actually tried it, it means nothing.
  • Like
Reactions: charlesrshell
jsmit86
If the OP has a router and a managed switch, that could be the problem.
I have a Hopper 3 and 5 Joey 4s. I recently updated my Router, Switch and access points with Ubiquiti UniFi gear. I had an issue where the switch interpreted the communication between the hopper internet connection and one of the Joeys as a data loop. I had to change some settings in the switch to re-enable that port. Your router could possibly be doing the same thing blocking the connection.

If your router has a malware connection setting, try disabling it temporarily, and see if the internet comes back. Contact your ISP and see if there is a block happening at the router or switch level, or via the ISP's threat protection.
  • Like
Reactions: charlesrshell
Almighty1
If the OP has a router and a managed switch, that could be the problem.
I have a Hopper 3 and 5 Joey 4s. I recently updated my Router, Switch and access points with Ubiquiti UniFi gear. I had an issue where the switch interpreted the communication between the hopper internet connection and one of the Joeys as a data loop. I had to change some settings in the switch to re-enable that port. Your router could possibly be doing the same thing blocking the connection.

If your router has a malware connection setting, try disabling it temporarily, and see if the internet comes back. Contact your ISP and see if there is a block happening at the router or switch level, or via the ISP's threat protection.
Can you share what settings you had to change?

Required Inbound & Outbound Network Ports
The standard ports designated for DISH Hopper configurations include:
    • TCP Port 80 – HTTP communication
    • TCP Port 443 – HTTPS secure communication
    • TCP Port 5678 – Neighbor Discovery / Device Sync
    • UDP Port 80 – Alternative streaming/network data
    • UDP Port 443 – Alternative secure media streams
    • UDP Port 5678 – Remote pairing and network discovery
Critical Network & Security Considerations
    • UPnP (Universal Plug and Play): Enabling UPnP on your router is the easiest way to allow the Hopper to automatically handle its own port maps.
    Internal Communication (MoCA & Local LAN): The Hopper Plus and Joeys communicate internally over your local home network using router's default internal traffic policies. Local firewall software or strict internal VLAN isolation can block the Hopper 3 from seeing the Hopper Plus or Joey extensions.

    The other thing is that these are streaming channels which was why I asked if they have worked correctly even without the Hopper Plus as checking the post history of the OP, it appears that the Hopper Plus was added around 1/2 a year ago and from looking at my own Internet settings portion, all the Hopper 3 does is really measure signal strenth for WiFi and probably just check ping times to show it is connected or not to the internet, it does not check the actual speed or latency. Since the OP has a Hopper Plus, OP can always install the Speedtest app for diagnostics and then take a photo of the results and post it here. Before 2017, I used tȯhave 6Mbps/768Kbps ADSL and even though the Hopper 1 and Hopper 3 also showed internet connectivity is okay, everytime my Ring Doorbell is uploading, it would knock the entire internet connection off-line as the upload pipe would be 100% filled by the Ring Door bell uploading the video because the ACKnowledgement packets would not have priority being sent back in time which was fixed with QoS traffic shaping but that still does not mean streaming will work as it requires at least 25Mbps minimum or more if there are other devices on the same connection sharing the bandwidth.


    ​
  • Like
Reactions: charlesrshell
jsmit86
Can you share what settings you had to change?

Required Inbound & Outbound Network Ports
The standard ports designated for DISH Hopper configurations include:
    • TCP Port 80 – HTTP communication
    • TCP Port 443 – HTTPS secure communication
    • TCP Port 5678 – Neighbor Discovery / Device Sync
    • UDP Port 80 – Alternative streaming/network data
    • UDP Port 443 – Alternative secure media streams
    • UDP Port 5678 – Remote pairing and network discovery
Critical Network & Security Considerations
    • UPnP (Universal Plug and Play): Enabling UPnP on your router is the easiest way to allow the Hopper to automatically handle its own port maps.
    • Internal Communication (MoCA & Local LAN): The Hopper Plus and Joeys communicate internally over your local home network using router's default internal traffic policies. Local firewall software or strict internal VLAN isolation can block the Hopper 3 from seeing the Hopper Plus or Joey extensions.The other thing is that these are streaming channels which was why I asked if they have worked correctly even without the Hopper Plus as checking the post history of the OP, it appears that the Hopper Plus was added around 1/2 a year ago and from looking at my own Internet settings portion, all the Hopper 3 does is really measure signal strenth for WiFi and probably just check ping times to show it is connected or not to the internet, it does not check the actual speed or latency. Since the OP has a Hopper Plus, OP can always install the Speedtest app for diagnostics and then take a photo of the results and post it here. Before 2017, I used tȯhave 6Mbps/768Kbps ADSL and even though the Hopper 1 and Hopper 3 also showed internet connectivity is okay, everytime my Ring Doorbell is uploading, it would knock the entire internet connection off-line as the upload pipe would be 100% filled by the Ring Door bell uploading the video because the ACKnowledgement packets would not have priority being sent back in time which was fixed with QoS traffic shaping but that still does not mean streaming will work as it requires at least 25Mbps minimum or more if there are other devices on the same connection sharing the bandwidth.
This was for port settings for the switch, not the router.

Originally was recommended to use EDGE vs. Infrastructure, but had to change that back to Infrastructure.

Had to leave STP (Spanning tree protocol) ON, but disable BPDU guard, and also had to disable Non-STP loop protection.

The previous settings were flagging normal dish system packets as a data loop, and fully blocked that port on the UniFI Pro Max 16 POE switch.

These were specific to my managed switch, and may not apply to the OP's issue.
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
30 Replies · 1780 views
  • Like
Reactions: LQQK and reubenray
rvvaquero
That's a lot of information to ingest. However, I don't have the Hopper Plus and my 54 remote is doing crazy things to the Hopper 3. Several times each evening when I press the skip forward button several times to advance through a commercial, it switches the receiver either onto live TV or into suspension. Other buttons will also cause this randomly, I haven't established any patterns I can describe. I use "recall" to go back to my recorded program in progress.

Needless to say, something in the newer Hopper 3 softwares has caused the remote functioning to ......................malfunction. Evidently, it applies to third party remotes as well as DISH's own remotes.
GRB1959
That's a lot of information to ingest. However, I don't have the Hopper Plus and my 54 remote is doing crazy things to the Hopper 3. Several times each evening when I press the skip forward button several times to advance through a commercial, it switches the receiver either onto live TV or into suspension. Other buttons will also cause this randomly, I haven't established any patterns I can describe. I use "recall" to go back to my recorded program in progress.

Needless to say, something in the newer Hopper 3 softwares has caused the remote functioning to ......................malfunction. Evidently, it applies to third party remotes as well as DISH's own remotes.

This is exactly the same issue I was having as I had the Hopper 3 and 54 remote without the Hopper Plus and the symptoms were virtually identical to yours.
  • Like
Reactions: charlesrshell
ERSanders
We have had a corolary problem in this and the prior s/w. Using several different 40.0 remotes (yeah, we're old), when one pauses a live or recorded show it becomes a crap shoot whether it will step foreward the 30" as requested, jump to the end, or restart the episode. Tried the famous 60" reboot to no avail and have decided to live with it vs. a receiver swap risk.
T
I think there's a change to the "skip forward 30 seconds". With CBS that does not have auto-skip, if you stack up a bunch of 30 second forwards it seems to stop when the kangaroo signaling the end of the commercial break appears.
long_time_Dish
Also posted this in the 3rd party remote thread.

My Hopper 3 updated itself to H713 last week and the IR issue is worse now. On H711, I could be on an SD channel for several hours and the IR side of my H3 would still be responsive without my having to tap the View button on my Pronto Pro every 15 minutes. Now, if I stay even on an SD channel without tapping the View button at least once an hour, it becomes unresponsive to my Pronto Pro without tapping the View button at least 5-20 times, just like on the HD and 4K channels. So, H713 actually made the issue worse. :(

brittanygarden
  • Like
Reactions: charlesrshell
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5452 Replies · 336396 views
dfergie
IMG_5955.webp

Sweet tea…
  • Like
Reactions: Bobby and TRG
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
  • Like
Reactions: Bobby
TRG
TRG
Breakfast for lunch. Crispy corned beef hash, home fries, two over easy eggs and sourdough toast.

1653.webp
TRG
TRG
Grabbed a burrito on the run. Beef, pinto beans, green chile and cheese. Stewart's cream soda.

burr.webp
  • Like
Reactions: Mr Tony and dfergie
dfergie
Beef, bean green chile, cheese homemade burritos here... Water
  • Like
Reactions: TRG
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68707 Replies · 2683082 views
  • Like
Reactions: c-spand
dishstaller
The First Time Ever I Saw Your Face - Roberta Flack
harshness
In the Still of the Night - The Five Satins
  • Like
Reactions: RaiderPower
Bobby
I Still Haven't Found What I'm Looking For - David Cook
  • Like
Reactions: dishstaller
sdfntx
Looking for the Next Best Thing - Warren Zevon
long_time_Dish
Werewolves Of London - Warren Zevon
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Was raining yesterday so I went to Sams up in Dothan to stock up on some things. Haven't been there in quite a while. I was amazed at how large most of the TVs were. When I walked in they had a 100 in Vizio (I think it was Vizio) that was marked down to something like $1,200. The first rows of TVs were all in the 80 in + sizes. The next couple of rows had the "smaller" models....those 75 and under. I was amazed at how small the 75s looked when lined up with the larger screens.
4 Replies · 54 views
osu1991
Q-LED and Mini LED panels have improved the picture quality and the tv's are so thin and nearly without bezels now. I've thought about replacing the 75in 4k DV/HDR LED Sony in my living room with a newer 86in. That's as big as I can go without construction changes. I watch the 75in 4k DV/HDR Q-LED in my bedroom and the difference between the two is very noticeable. There's nothing wrong with the living room tv though and I don't now that I actually watch enough anymore to really justify it. I could move it out to the patio but the 65in Q-LED out there looks really good and I'd have to change the mount to accomdate a larger tv out there.
  • Like
Reactions: dishstaller
Foxbat
I'm at a limit for TV sizes at this time. My Father-in-Law crafted a custom entertainment center for our family room and we were restricted from going too big based on the side cabinets and central bridge fitting in the width of the room. It turns out to be where a 55" screen with bezels fits but no 65" bezel-less screen can fit. I think there was a brief period where 58" screens where a thing, but no more.

So, no huge screens for the Foxbat's…
TRG
TRG
I'm at a limit for TV sizes at this time. My Father-in-Law crafted a custom entertainment center for our family room and we were restricted from going too big based on the side cabinets and central bridge fitting in the width of the room. It turns out to be where a 55" screen with bezels fits but no 65" bezel-less screen can fit. I think there was a brief period where 58" screens where a thing, but no more.

So, no huge screens for the Foxbat's…

55" is plenty big.
dishstaller
55" is plenty big.
And to think....I was SO proud of myself when I bought a 27 in TV in the late 80s. Everyone just had a 25 in so I was really in high cotton.
TRG
TRG
Pub Member / Supporter
· posted in The Chit Chat Club
I've pretty much done most things in Ireland and I'm thinking about the other side of the Irish sea. I'm thinking about traveling to Wales this summer. My second choice would be Scotland. I don't want anything to do with London except maybe landing in Heathrow and then escaping quickly.

Any tips or experiences to share?
0 Replies · 13 views