Social Feed

egg2004

Last reply May 21, 2009 · posted in Free To Air (FTA) Discussion

Bullseye feed horn hook up w/ only 2 coaxial cables one c, one ku

How exactly do i hook up a bullseye feed horn that would replace my exsisting co roter?

There was an old thread related to my quetion. It started out with "ordered a dual C and ku feedhorn", but you could never tell exactly how it ended. Also, i wasnt a 100% clear on everything that was mentioned.

My existing system is as follows:

* I have a dual ku/c band coroter feed horn with 2 lines (one for each) coming from the dish into the house.
* inside i split these lines using spltters and a disecq switch in order to
hook them up to 2 recievers.
* I have a 4 DTV reciever and a pansat 300a receiver. The Pansat is a
slave to the 4dtv.

Heres my real question: Since the bullseye has 4 lnbs (2 ku/ 2 c) 1 each or each polarity. And, since i only have a single line feed coming from out side (1 for ku and 1 for c) can i simply combine the 2 outputs from the ku-lnbs into the one ku coaxial line using a splitter, and combine the 2 outputs from the C lnbs into one c-band coaxial line using another splitter (i.e. 2 lines will be coming from the dish (1 c/ 1 ku with combined polarity). I'm thinking that that would be all i need to do? I would then leave the existing process inside alone (i.e. the splitting of the 2 lines using splitters and a disecq switch that are currently used to hook up the recievers).

Is anyone familiar doing this? Am i on the right page or am i way off?

Please try to keep it none engineeric.. because i am not an engineer. I am just simple hobbiest.

Thank you in advance for any and all help.

33 Replies · 7815 views

Load Replies (33) Reply Legacy View

egg2004

May 18, 2009

bullseye feed horn

Thank you ACRadio. I have a very strong idea that i need to rotate the feed horn. I'm not there to look now. Also, is it possble to hook up the ku lnbs backwards, or will the screw possitions make that impossible, or does it even matter? I'm wondering if i did something goofy there as well?

Thank you all

1captain

May 18, 2009

egg2004 said:
Thank you ACRadio. I have a very strong idea that i need to rotate the feed horn. I'm not there to look now. Also, is it possble to hook up the ku lnbs backwards, or will the screw possitions make that impossible, or does it even matter? I'm wondering if i did something goofy there as well?

Thank you all

Yes you can mix up how the ku lnb's bolts to the wave guide, double check that the wave guide in the lnb matches the wave guide of the ortho feed throat.

also another thing, is you need to have the ku wave guide set to the same polarity as the c-band, for when you tighten up the set screw in the ortho feed for the ku-feed throat, just line them up, you can use a square or a level or angle finder for this.

egg2004

May 19, 2009

bullseye feed horn

I had a chance to play around with it last night and i rotated it as discribed in previous post. It appears that both the horizonal and vertical c-band LNBS are workiing because i can get even and odd channels but not at same time. I rotated it as discribed and i was getting horizonal channels (galaxy 15), but not the veritical channels. I then rotated slighly more (about 10-20 degrees) and then i got the vertical channels, but so far not both at the same time?
I didnt even bother with the ku. I figured lets try getting the easier c band working first. I did not try any of the other things mentioned. I will continue to play with it.

egg2004

May 21, 2009

bullseye feedhorn

Both horizontal/veritical c-band lnbs appear to be working, but i just cant get them to work together. I rotate the horn and get all horizontal channels working great, then i rotate it a little, each time checking it, but when the vertical channels are working then the horizonal channels stop. I tried what was suggested, but the same old same old.

Does anyone have any ideas whats going on. I guess i can start trying different depths (i.e. how far the horn is sitting in the flange). Would that make any difference. Does anyone know of a post/thread that DETAILS installing a bullseye feed horn. I'll researching now.

Thank you

pendragon

May 21, 2009

What kind of switch are you using and how is it wired? It might be useful to hard wire the H LNB to receiver, get that tweaked for best quality and then hard wire the V LNB to your receiver. If you do the latter, tell you receiver it's H only so you get the full 18V that the LNB may be expecting. I don't have a Bullseye, but a fairly similar ADL dual ortho. In my case I had to move the feed a bit closer to the dish than a corotor for the best reception.

1captain

May 21, 2009

egg2004 said:
Does anyone have any ideas whats going on. I guess i can start trying different depths (i.e. how far the horn is sitting in the flange). Would that make any difference. Does anyone know of a post/thread that DETAILS installing a bullseye feed horn. I'll researching now.

Thank you

It has to be in you're wiring or you're multi-switch or both how you have them hook to the multi switch, the V-lnb needs to go to the V-port on multi-switch an the H lnb needs to go the H-port on the multi-switch, then do the same for the Ku lnb's but put them on the 22khz ports of you're multi-switch.

Now you're different depts that you are saying is a BIG no no, that is you're F/D ratio an you will be defetting the gain of a ortho when you start change it from what you're dish requires, all dishes have a different F/D ratio an this is very important when the tunning or the set up of a dish, you need to set the F/D an never ever change it. if you need to move the feed in or out you need to do it with the feed legs not by changing the dept in the scalar, that is if you want a very well tuned dish.

View all replies (33)

TWiT Tech Podcast Network

27 minutes ago · posted in TWiT Tech Podcast Network

Apple Intelligence: Siri AI Revolutionizes Your Devices! #shorts

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/8ErY6s7b8WI

Direct YouTube Link - Apple Intelligence: Siri AI Revolutionizes Your Devices! #shorts
TWIT's Website
TWIT Live Feed

0 Replies · 0 views

Replies Reply Legacy View

TWiT Tech Podcast Network

57 minutes ago · posted in TWiT Tech Podcast Network

Tech News Weekly 441

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=JL5XFOpX4_A

Direct YouTube Link - Tech News Weekly 441
TWIT's Website
TWIT Live Feed

0 Replies · 3 views

Replies Reply Legacy View

TWiT Tech Podcast Network

57 minutes ago · posted in TWiT Tech Podcast Network

Home Theater Audio: JBL SCL-6 Speaker Custom Build! #shorts

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/CRhynF2RE20

Direct YouTube Link - Home Theater Audio: JBL SCL-6 Speaker Custom Build! #shorts
TWIT's Website
TWIT Live Feed

0 Replies · 2 views

Replies Reply Legacy View

teachtom

59 minutes ago · posted in DISH Network Support Forum

Problem when I switch from Bonus View channels back to regular Dish channels

Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks

0 Replies · 12 views

Replies Reply Legacy View

dfergie

Staff member HERE TO HELP YOU!

Last reply Today at 2:19 PM · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so...

Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...

5389 Replies · 334596 views

Load Replies (5389) Reply Legacy View

TRG

Monday at 3:34 PM

Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.

Reactions: Bobby and dfergie

dfergie

Monday at 4:27 PM

TRG said:
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.

View attachment 191651

Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.

Reactions: TRG

TRG

Monday at 4:50 PM

dfergie said:
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.

I've been retired since October. It was very strange at first. But I'm loving it now.

Reactions: dfergie

TRG

Yesterday at 4:11 PM

Creamy flat chicken enchiladas with green chile, beans and rice.

Reactions: dfergie

dfergie

Today at 2:05 PM

Layered Spicy Dorito / chili cheese Frito pie casserole…real sugar Pepsi

Reactions: TRG and Bobby

TRG

Today at 2:19 PM

I had a very unusual but delicious 1/4lb hotdog with cream cheese, raspberry preserves and chopped Hatch green chile. It is an unlikely combination but it works.

Reactions: Bobby and dfergie

View all replies (5389)

N5XZS

Last reply Today at 2:08 PM · posted in Over the Air Television By RabbitEars.Info

New low power station with CP has been granted. "Albuquerque "

New low power station has been granted by the FCC and the new call leter is K33OB-D on RF ch. 33.

Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.

It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.

This new station is owned by Digital Network and what kind of programmings is unkown at this time.

10 Replies · 153 views

Load Replies (10) Reply Legacy View

Reactions: comfortably_numb and dfergie

N5XZS

Yesterday at 4:51 PM

Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets on like the Rev'n, Karate Acton movies, different kind of music videos on the new station. :hatsoff2

Reactions: comfortably_numb

comfortably_numb

Yesterday at 4:54 PM

N5XZS said:
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets like Revn, Karate Acton movies, different kind of music videos on the new station.

I watch MovieSphere Gold channel a lot. Many recent movies on that digitnet

N5XZS

Yesterday at 4:59 PM

Yes that's a good channel MovieSphere, only thing is the missing CC on it.

Reactions: comfortably_numb

comfortably_numb

Today at 1:35 AM

According to the FCC listing, the tower is near I-40 and Juan Tabo:

FCCInfo Results

FCC Info is a Radio and Television Station Search Engine provided by Cavell, Mertz & Associates, Inc.

www.fccinfo.com

primestar31

Today at 2:08 PM

comfortably_numb said:
According to the FCC listing, the tower is near I-40 and Juan Tabo:

FCCInfo Results

FCC Info is a Radio and Television Station Search Engine provided by Cavell, Mertz & Associates, Inc.

www.fccinfo.com

Many of these in my DMA are on cell towers, so don't always reach very far because the towers aren't very high.

View all replies (10)

Linus Tech Tips

Today at 2:02 PM · posted in Linus Tech Tips

I Found Free Money in the Tech House

Time for another AWESOME video from Linus Tech Tips!

View: https://www.youtube.com/watch?v=6FoAOhbeo5Y

Direct YouTube Link - I Found Free Money in the Tech House
Linus on Facebook
The LTT Store

0 Replies · 4 views

Replies Reply Legacy View

TWiT Tech Podcast Network

Today at 1:32 PM · posted in TWiT Tech Podcast Network

Hollywood Faces the AI Tipping Point with Robert Tercek

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=MOgBoy9ScCY

Direct YouTube Link - Hollywood Faces the AI Tipping Point with Robert Tercek
TWIT's Website
TWIT Live Feed

0 Replies · 2 views

Replies Reply Legacy View

zippyfrog

Pub Member / Supporter Lifetime Supporter

Last reply Today at 1:28 PM · posted in DISH Network Support Forum

Price Increase on Owned Equipment?

Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.

6 Replies · 92 views

Load Replies (6) Reply Legacy View

zippyfrog

Today at 11:29 AM

However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...

Reactions: charlesrshell

telstar_1

Today at 11:45 AM

Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees

Reactions: zippyfrog and charlesrshell

zippyfrog

Today at 12:34 PM

telstar_1 said:
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees

Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.

Reactions: charlesrshell

MikeD-C05

Today at 1:11 PM

These fees are why streaming has caught on so well across the country and DISH is losing subs each quarter. Soon won't be enough subs to be profitable.

Reactions: dishdude, Mr Tony, zippyfrog and 1 other person

telstar_1

Today at 1:28 PM

Does cable charge box rent?

Reactions: charlesrshell

View all replies (6)

Bruce

Supporting Founder Lifetime Supporter

Last reply Today at 1:16 PM · posted in DISH Network Support Forum

Dish Satellite now under 5 Million subscribers/Sling under 2 Million.

With the 1st Quarter Report just released, Dish lost another 180,000, now at 4.84 Million.

Sling now at 1.79 million subscribers, down approximately 190,000.

For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.

DISH & Sling TV Lost Over 366,000 TV Subscribers In Just 3 Months | Cord Cutters News

EchoStar Corporation, the owner of the DISH Network satellite television service and the Sling TV streaming platform, continued to experience steep declines in its pay-television customer base during the first three months of 2026. The company reported a net loss of approximately 366,000 pay-TV...

cordcuttersnews.com

71 Replies · 3429 views

Load Replies (71) Reply Legacy View

fmj77

May 11, 2026

I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.

Reactions: charlesrshell

Bruce

May 11, 2026

fmj77 said:
I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.

Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.

Reactions: fmj77, telstar_1 and charlesrshell

Yespage

May 18, 2026

$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.

Reactions: charlesrshell

telstar_1

Jun 2, 2026

I despise that most of all. I'm going to talk to a remote?

Reactions: MikeD-C05 and charlesrshell

tsunami2311

Friday at 11:03 PM

Yespage said:
$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.

1gbit up and down here from att start out great was suppose to be $60 for life of service, with years time it went back up to $80 I complained about they gave us $49 for year which about to end, I Wonder what prices will be when it "up" I in no way like ATT fiber service there DNS that are hardcode and unchange able in the router are some WORSE DNS I ever used. you know how much of pain it is to change DNS setting on EVERY single wireless device...

Reactions: charlesrshell

mwdxer1

Saturday at 3:08 AM

Bruce said:
Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.

I dropped Dish a couple years back after having them for 25 years. The pricing got higher and after we got high speed internet, I watched it less and less. It got to the point all I watched was TCM for classic movies. Many of them are on You Tube now and a Premium subscription is $14 a month. A far cry of the $100 a month was paying with AT180, Supers, and locals. I get locals OTA anyway. I took down the dish several months ago and tossed it. I owned all my my equipment, so nothing to return. Do I miss a traditional cable type service? No way. If I want one I have all of the free live streaming with Roku, the Fire Stick, as well as Google TV. Right now as I type this, I am watching episodes of "The Midnight Special" from 1976 on You Tube, ad free. Dish was fine for many years. I do not regret buying the equipment and installing it myself (No installers in 1999). I enjoyed Dish for many years. My thoughts, Dish & Direct will be forced to merge in time, or they both will be gone. Even cable companies are getting out of TV. Some are only selling the internet and phone packages.

Reactions: charlesrshell and MikeD-C05

tanman

Sunday at 12:01 PM

telstar_1 said:
I despise that most of all. I'm going to talk to a remote?

Hello Computer On Phone GIF - Hello Computer Hello On Phone - Discover & Share GIFs

Click to view the GIF

tenor.com

Reactions: charlesrshell

nelson61

Monday at 8:20 PM

A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more

Reactions: charlesrshell

MikeD-C05

Today at 1:16 PM

nelson61 said:
A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more

In my area we get 2 news feeds spread over 4 local stations.
ABC/NBC (TEGNA)
Same news cast simulcast over both channels.

CBS/Fox (Sinclair)
Same news casters at 5pm, 6pm, 10pm.
Fox shows an hour at 9pm but same news casters.

Reactions: charlesrshell

View all replies (71)

Top

Back