Social Feed

T
Last reply · posted in Free To Air (FTA) Discussion
Has anybody seen a DVB-S2 receiver in the wild that has a TDA10071 based demodulator? It appears that NXP (Philips) released info on the chip back in May of 2009.. but I can't find the part at distributors yet, or any devices that make use of it. I'm trying to get a development sample to make a DVB-S2 tuner with hardware blind-scan support (the TDA10071 has built-in blind-scan support, S2 style).

For that matter, does anybody know of ANY receivers/PC tuners that have S2 hardware blind-scan support? If so, please let me know of the brands/models :)

This is more of a "for fun" project, don't expect me to start mass-producing such a device :P
27 Replies · 7291 views
LinuxSignalSeeker
tester, if you happen to get more documentation from STMicro, perhaps you can post it (or have it posted) under the manuals section? You've definitely stumbled onto something interesting here and I'd love to take a look and help if/where I can.
P
I have the 7500 (USB) and 7301 (PCI) units running together on Windows for the moment as a kind of stress test. I tried plugging in the 7500 into one of my Linux machines, but the DVB drivers didn't recognize it. My driver baseline is probably a couple of months old, so I need to update it to see if that's all that's required. If I get a chance I also try the 7301 on Linux.
T
tester, if you happen to get more documentation from STMicro, perhaps you can post it (or have it posted) under the manuals section? You've definitely stumbled onto something interesting here and I'd love to take a look and help if/where I can.


There might be issues with NDAs.. the drivers were clearly written with a good understanding of the hardware, and ST doesn't appear to have that information publicly on their site, just a simple spec sheet. I'm going to try to contact the author listed in the header and see if they can provide some insight. If I do get information that I can share, I will definitely post it.
T
I have the 7500 (USB) and 7301 (PCI) units running together on Windows for the moment as a kind of stress test. I tried plugging in the 7500 into one of my Linux machines, but the DVB drivers didn't recognize it. My driver baseline is probably a couple of months old, so I need to update it to see if that's all that's required. If I get a chance I also try the 7301 on Linux.

The 7301 should work.. but there have been some very recent changes to the driver code, so you might have better luck compiling a custom, bleeding-edge kernel.
P
The 7301 should work.. but there have been some very recent changes to the driver code, so you might have better luck compiling a custom, bleeding-edge kernel.

Pulled the latest snapshot with Mercurial and rebuilt. No-go for either the 7301 or 7500. I saw some "stv090x/stv6110x improvements and bug fixes" that were posted on Oct 14 that have not been rolled in, but nothing stood out as essential to get the devices recognized. If I find some time this weekend I'll look into adding the necessary pieces. Most of the testing for the STV0903 seems to be with a TT-1600.
T
Pulled the latest snapshot with Mercurial and rebuilt. No-go for either the 7301 or 7500. I saw some "stv090x/stv6110x improvements and bug fixes" that were posted on Oct 14 that have not been rolled in, but nothing stood out as essential to get the devices recognized. If I find some time this weekend I'll look into adding the necessary pieces. Most of the testing for the STV0903 seems to be with a TT-1600.

Hmm. I suppose I was wrong about support :) Looks like it's got a cx23883 PCI interface chip ("broadcast decoder"). Need to add a card def in the cx88 drivers. Do you know if we can just use some existing cx23883 firmware from another card, or are they all card specific? Fun times ahead! I'm at a loss right now, since I don't have hardware to test with yet. I've just been trying to more familiarize myself with the DVB-API v5.

The driver code for the stv0903 seems to make me think that depending on the version of the chip or when it was made, it supports more modulation modes than advertised by Prof. :confused:
P
As this thread has morphed into a different topic and direction, and now belongs better in the PC subforum, several of us have suggested moving or splitting this thread. We apparently need a mod to do this, but no one has either asked or acted. Being on the lazy side, but wanting to do the right thing in the end, I have opened a new thread in the PC DVB Discussion subforum where I will continue to post progress and discoveries. I am encouraging others to do so as well.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 3 views
T
· posted in DISH Network Support Forum
Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
0 Replies · 12 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5389 Replies · 334596 views
TRG
TRG
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life. 🍺

20260503_145250.webp
  • Like
Reactions: Bobby and dfergie
dfergie
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life. 🍺

View attachment 191651
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.
  • Like
Reactions: TRG
TRG
TRG
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.
I've been retired since October. It was very strange at first. But I'm loving it now.
  • Like
Reactions: dfergie
TRG
TRG
Creamy flat chicken enchiladas with green chile, beans and rice.

enc.webp
  • Like
Reactions: dfergie
dfergie
Layered Spicy Dorito / chili cheese Frito pie casserole…real sugar Pepsi
IMG_5609.webp
  • Like
Reactions: TRG and Bobby
TRG
TRG
I had a very unusual but delicious 1/4lb hotdog with cream cheese, raspberry preserves and chopped Hatch green chile. It is an unlikely combination but it works.


hdog.webp
  • Like
Reactions: Bobby and dfergie
N5XZS
Last reply · posted in Over the Air Television By RabbitEars.Info
New low power station has been granted by the FCC and the new call leter is K33OB-D on RF ch. 33.

Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.

It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.

This new station is owned by Digital Network and what kind of programmings is unkown at this time.😎
10 Replies · 153 views
N5XZS
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets on like the Rev'n, Karate Acton movies, different kind of music videos on the new station. :hatsoff2
  • Like
Reactions: comfortably_numb
comfortably_numb
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets like Revn, Karate Acton movies, different kind of music videos on the new station. :hatsoff2

I watch MovieSphere Gold channel a lot. Many recent movies on that digitnet :)
N5XZS
Yes that's a good channel MovieSphere, only thing is the missing CC on it. :rolleyes: :hatsoff2
  • Sad
Reactions: comfortably_numb
comfortably_numb
According to the FCC listing, the tower is near I-40 and Juan Tabo:

primestar31
According to the FCC listing, the tower is near I-40 and Juan Tabo:

Many of these in my DMA are on cell towers, so don't always reach very far because the towers aren't very high.
zippyfrog
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
6 Replies · 92 views
zippyfrog
However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...

1781191675068.webp
  • Like
Reactions: charlesrshell
T
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
zippyfrog
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.

1781195549844.webp
  • Like
Reactions: charlesrshell
MikeD-C05
These fees are why streaming has caught on so well across the country and DISH is losing subs each quarter. Soon won't be enough subs to be profitable.
T
Does cable charge box rent?
  • Like
Reactions: charlesrshell
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
With the 1st Quarter Report just released, Dish lost another 180,000, now at 4.84 Million.

Sling now at 1.79 million subscribers, down approximately 190,000.

For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.

71 Replies · 3429 views
fmj77
I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.
  • Like
Reactions: charlesrshell
Bruce
I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.
Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.
Y
$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.
  • Like
Reactions: charlesrshell
T
I despise that most of all. I'm going to talk to a remote?
T
$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.


1gbit up and down here from att start out great was suppose to be $60 for life of service, with years time it went back up to $80 I complained about they gave us $49 for year which about to end, I Wonder what prices will be when it "up" I in no way like ATT fiber service there DNS that are hardcode and unchange able in the router are some WORSE DNS I ever used. you know how much of pain it is to change DNS setting on EVERY single wireless device...
  • Like
Reactions: charlesrshell
mwdxer1
Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.
I dropped Dish a couple years back after having them for 25 years. The pricing got higher and after we got high speed internet, I watched it less and less. It got to the point all I watched was TCM for classic movies. Many of them are on You Tube now and a Premium subscription is $14 a month. A far cry of the $100 a month was paying with AT180, Supers, and locals. I get locals OTA anyway. I took down the dish several months ago and tossed it. I owned all my my equipment, so nothing to return. Do I miss a traditional cable type service? No way. If I want one I have all of the free live streaming with Roku, the Fire Stick, as well as Google TV. Right now as I type this, I am watching episodes of "The Midnight Special" from 1976 on You Tube, ad free. Dish was fine for many years. I do not regret buying the equipment and installing it myself (No installers in 1999). I enjoyed Dish for many years. My thoughts, Dish & Direct will be forced to merge in time, or they both will be gone. Even cable companies are getting out of TV. Some are only selling the internet and phone packages.
tanman
I despise that most of all. I'm going to talk to a remote?
  • Like
Reactions: charlesrshell
nelson61
A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more
  • Like
Reactions: charlesrshell
MikeD-C05
A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more
In my area we get 2 news feeds spread over 4 local stations.
ABC/NBC (TEGNA)
Same news cast simulcast over both channels.

CBS/Fox (Sinclair)
Same news casters at 5pm, 6pm, 10pm.
Fox shows an hour at 9pm but same news casters.
  • Like
Reactions: charlesrshell