Social Feed

W
Last reply · posted in Free To Air (FTA) Discussion
Iceberg and PSB

I was not awar that USALS would work with a SG2100 either and that is the set up I have along with a Fortec Ultra Lifetime.

What do I have to do to make the USALS work? Just tell it the due south satellite and it is going to automaticaly know where the rest are? (I Hope So)

I currently use the DISECQ 1.2 setting on my receiver.

Wholeshoe
18 Replies · 2443 views
W
Iceberg said:
once you set it up, it should be set fine

Doesn't diseqc 1.2 you have to move the dish everytime you switch satellites? USALS does that for you automatically.

With diseqc 1.2 I I have to tell it where every satellite is one time and store that position, once I go this it remembers where that satellite is and will automatically go to it.

If I have to play with USALS and fool it for every satellite I may as well just set each one up with diseqc 1.2 because it gives me the ability to nudge the dish one way or the other and "fine tune" my setting.

Right now I am not seeing the USALS advantage if you do not have a true south sattelite.

I think that when my motor is set at 0 I am pointed at 87 degrees or a little east of due south, then when I switch it to USALS it the motor turns to 1.3 degrees east of true south. I think that when it does that I need to go outside and swing the whole dish back west on the pole until AMC3 comes back in and then I will be pointed true south when my motor is at 0.

I hope that made sense,

Wholeshoe
TuxCoder
Wholeshoe, you just need to point the motor's 0 position to absolute true south (not magnetic south of course). Do not worry about whether there is a satellite there or not. Then enter in your exact latitude and longitude into your receiver. At this point everything should be set up for your receiver to automatically move the dish to whatever orbital location you want, as long as they are not out of the physical bounds of your motor or its mount. To fine tune your dish so you can get a strong signal on all the satellites (or any signal to begin with), tell the receiver to move the motor to the nearest satellite to your true south. It should move the dish to the right spot then. Leave the motor's 0 position pointing to true south. Don't move the motor, just move the dish around. And don't worry if during the above steps the motor is moving as you're changing values, that's normal. Just so long as when you tell it to go to your nearest satellite, it goes to the right spot, that's all that matters.
PSB
PSB
If only Telstar 4 (89W R.I.P) was still "UP THERE" you would be fine, I would use USALS to get in the ball park then DiSEqC 1.2 to fine tune and store position.

Whoops never seen Tux's answer I would do that first then revert to the above if all else fails!
W
Tux

Thats exactly what I am going to try tonight when I get home.

If I push the reset button on the motor will it turn to its 0? I want to get it at 0 then switch to usals and let it turn 1.3 to the east then swing the whole motor/dish assembly on the pole until I actually tune in AMC3.
TuxCoder
I don't know if the reset button will make the motor go to zero or not. It's probably supposed to, but still it is recommended that you already have the motor at 0 if possible, before doing a reset.

As for your plan, when you say you'll "swing the whole motor/dish assembly on the pole" I hope you mean it's just to better point the motor's 0 position to true south. Really you should just leave the motor assembly alone once you're confident its 0 is pointing true south. If the zero is not true south, you might get AMC3 ok but you most likely will not even get a signal on all the other satellites. The USALS algorithm requires that A) the fixed part of the motor is facing due south and B) you have provided your correct longitude and latitude into the receiver. The (A) requirement is much more demanding than (B). Just get your coordinates as precise as you can figure out for your location (a GPS or a buddy with a GPS would be an excellent asset here).
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
A continuation of a thread from the pub, just general discussion of AI.

Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.


View: https://youtu.be/DRm0mbp_n1k


We've literally got a movie already about this ;)


View: https://youtu.be/a2PW7a9ViDc
62 Replies · 1036 views
meStevo
Agreed, it mostly regurgitates known solutions. That's the point. Nobody needs an innovative fix for a driver error or a creative way to format a report. Let it handle the solved problems so people can spend their time on the ones that aren't.
harshness
Agreed, it mostly regurgitates known solutions. That's the point.
That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.
meStevo
That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.

Addressed by what you didn't quote. This cycle is as old as computing: compilers, libraries, frameworks each automated the tedious part, and the human work moved up a level. Innovation didn't end; it shifted. And people still make new compilers, libraries or frameworks.

Nobody's forced to hand anything off. Anyone who wants to keep doing it by hand still can, and people who couldn't do it at all now can.
harshness
... and people who couldn't do it at all now can.
Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.
meStevo
Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.
You're not wrong, but that's part of learning. Whether from others or our own mistakes, we've all learned that lesson one way or another.
harshness
Whether from others or our own mistakes, we've all learned that lesson one way or another.
I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.
meStevo
I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.

This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.
  • Like
Reactions: telstar_1
harshness
This is true of literally anything, though.
Do you think that means we ought to be supporting it as the long-term solution?
Foxbat
​
Foxbat
Oops.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
I was watching some of this guy's stuff and realized some of you may not be familiar. Basically his show is Candid Camera meets a magician. This is a comp of a few of his exploits. I first learned of him when I was out at a meeting in Denver about 10yrs ago. The men I was sitting at the table with started talking about this show and said it was one of the funniest things they had seen. When I got home I started watching it....yes, it is funny.


View: https://www.youtube.com/watch?v=gIU09F8jdwc
2 Replies · 37 views
  • Like
Reactions: Jimbo
dishstaller
This one however is my all time favorite. Look at the way this guy holds the drill when he starts freaking out.


View: https://www.youtube.com/watch?v=Xt5DpFBtZwk&pp=ygUXY2FyYm9uYXJvIGVmZmVjdCByb21sZXk%3D
J
Last reply · posted in DISH Network Support Forum
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
22 Replies · 292 views
Almighty1
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

1792277626286.webp


This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
  • Like
Reactions: charlesrshell
J
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.
  • Like
Reactions: charlesrshell
J
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.
1000013035.webp
  • Like
Reactions: charlesrshell
J
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

View attachment 194853

This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
The image I just sent for master H3 is on hopper+., casino is not but both Vs and bootstraps are the same.
  • Like
Reactions: charlesrshell
Almighty1
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

1792279578261.webp
  • Like
Reactions: charlesrshell
J
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

View attachment 194857
As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68515 Replies · 2671780 views
  • Like
Reactions: c-spand
sdfntx
Somewhere in Time - John Barry
long_time_Dish
In Time - Kit Watkins
dishstaller
Time In a Bottle - Jim Croce
EatMyVolts
No Time -- The Guess Who
  • Like
Reactions: dishstaller
dishstaller
The Devil Went Down to Georgia - Charlie Daniels
Gary Toma
Staff member Pub Member / Supporter Cutting Edge
Last reply · posted in DIRECTV Technical Resources Forum
The TPN Map Excel Presents all DIRECTV Channels:
​
National (50-States or wide/NAT+PR beams)
Local (Local-Into-Local or narrow/Spot beams)
​
Additional tabs provide:​
OTA the (Over-The-Air) Database
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders
​
Domestic Satellites
@99W...... D11, D14
@101W.... D16
@103W.... D12, D15
@110W.... D5
@119W.... D8​

Understanding the TPN Map

Making Sense of the TPN Map Display Conventions
2142 Replies · 929623 views
K
Now testing on the stream server:
WJBF-D2 CW Augusta GA
KSVI-D2 CW Billings MT
WETM-D2 CW Elmira NY
WJET-D2 CW Erie PA
KLFY-D2 CW Lafayette LA
KARD-D2 CW Monroe LA
WVBT-D2 CW Norfolk VA
WTWO-D2 CW Terre Haute IN
WFXV-D2 CW Utica NY
KFDX-D3 CW Wichita Falls TX
K
PISTONS and THUNDER are finally testing on the stream server. PISTONS is showing the Ion/Scripps Sports promo loop filler that their NHL and WNBA feeds have, THUNDER has a "You are watching Thunder+" slate

The Clippers still haven't officially announced their TV plans beyond 10 simulcasts on KTLA, but the NBA's FAQ for ClipperVision is now live. The CLIPPERS feed is currently showing a loop of their Hawaii preseason game.

The Heat still haven't announced their West Palm Beach or Fort Myers affiliates. Since WPLG is streaming the games for free via their app, I doubt we'll be seeing the return of WPLG on stream.

So far nothing testing for the Bucks, Magic, Hawks or Hornets.
K
WETM-D2 CW Elmira NY
WJET-D2 CW Erie PA
KLFY-D2 CW Lafayette LA
KARD-D2 CW Monroe LA
WVBT-D2 CW Norfolk VA
WTWO-D2 CW Terre Haute IN
WFXV-D2 CW Utica NY
KFDX-D3 CW Wichita Falls TX
These are now live on stream and weren't testing on satellite as of yesterday:
WETM-DT/19 CW Elmira
WJET-DT/25 CW Erie
KLFY-DT/11 CW Lafayette LA
KARD-DT/15 CW Monroe
WVBT-DT/44 CW Norfolk
WTWO-DT/3 CW Terre Haute
WFXV-DT/34 CW Utica
KFDX-DT/4 CW Wichita Falls
K
The Heat still haven't announced their West Palm Beach or Fort Myers affiliates. Since WPLG is streaming the games for free via their app, I doubt we'll be seeing the return of WPLG on stream.
West Palm Beach is getting it on WTCN-CD/43 MNT. Still nothing for Fort Myers


Also, the Thunder's deal for KSBI/52 OKC and KQCW/19 Tulsa will be via a special cable and DIRECTV only feed of those stations. OTA viewers and Dish customers will be limited to 10 games.
dtv757
Thanks for the updates on CW norfolk
Hopefully comes to sat soon!!
dtv757
Not seeing 44 (WVBT-DT/44 CW Norfolk ) on my D* app for firestick
K
It's only available for streaming customers, they still haven't added that batch of CW stations to satellite.

Even if it was, satellite customers still can't stream their CW affiliates via the app, just the Big 4, select PBS stations and some independents (mainly the ones that have full season NHL/NBA rights)
  • Like
Reactions: Mr Tony
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
145 Replies · 1554 views
  • Haha
Reactions: Mike0616
Y
24 team playoff seems to be real close.

Are we really that far from a 64-team tournament?

The benefit of the 24 team playoff:
  • All the cartel teams that cartels want in playoff are in playoff
    • Independent of record too! Bonus.
  • MONEY!!!!! for the cartels.
  • I'm out of ideas.
Cons
  • Regular season really doesn't matter now other than the rivalry games
    • Top cartel teams can lose three games and still make the playoff
  • Going to start resting players?
    • The playoff is going to be *checks notes* several games!
    • Resting players could make games dumb.
    • Maybe even restrict NIL players from games played.
  • How much are streaming sub costs going up a month to pay for this?!
AZ.
AZ.
24 team playoff seems to be real close.

Are we really that far from a 64-team tournament?

The benefit of the 24 team playoff:
  • All the cartel teams that cartels want in playoff are in playoff
    • Independent of record too! Bonus.
  • MONEY!!!!! for the cartels.
  • I'm out of ideas.
Cons
  • Regular season really doesn't matter now other than the rivalry games
    • Top cartel teams can lose three games and still make the playoff
  • Going to start resting players?
    • The playoff is going to be *checks notes* several games!
    • Resting players could make games dumb.
    • Maybe even restrict NIL players from games played.
  • How much are streaming sub costs going up a month to pay for this?!
One of the pro's I see is in a year with so many undefeated teams they have a good chance of an opening. Few years back you had lower divisions that didnt get a shot. I love collage football and I have no problem with that addition.

We are in what week 5 now? Been two real good ranked games to watch.....Other than that top 25 teams are playing nothing.
Jimbo
One of the pro's I see is in a year with so many undefeated teams they have a good chance of an opening. Few years back you had lower divisions that didnt get a shot. I love collage football and I have no problem with that addition.

We are in what week 5 now? Been two real good ranked games to watch.....Other than that top 25 teams are playing nothing.
There are 68 Power 4 teams, so eventually they will get there I wouldn't imagine ...
AZ.
AZ.
There are 68 Power 4 teams, so eventually they will get there I wouldn't imagine ...
Far from it but you know that....You dont like the larger playoff.....Its ok.....
Jimbo
Far from it but you know that....You dont like the larger playoff.....Its ok.....
Oh, I Hate the idea ...

It would be different if it was a game that you could play 2 or games each week, but when you only play 1 game a week, the larger playoff is Not a good thing ...

The season has how many games now, is it 14 ... then you want to play another 5 (with more to come) against Top 12 (eventually 24 teams) ... remember, the 5 games in the playoffs will be the hardest games all year and back to back.

For example, IF Ohio State should win it all this year ... they play 5 teams in the Top 25, plus they would play 5 more to win it all, depending on how the ranking shake out and if Bye weeks are given.

Thats 10 Ranked teams ... in one year ...
I don't see that happening very often ...
Edit, Bama plays 4, Georgia plays 3, But Ole Miss plays 5 (didn't expect to see that)

That said, I don't see the Buckeyes winning it all this year.
  • Like
Reactions: AZ.
AZ.
AZ.
Oh, I Hate the idea ...

It would be different if it was a game that you could play 2 or games each week, but when you only play 1 game a week, the larger playoff is Not a good thing ...

The season has how many games now, is it 14 ... then you want to play another 5 (with more to come) against Top 12 (eventually 24 teams) ... remember, the 5 games in the playoffs will be the hardest games all year and back to back.

For example, IF Ohio State should win it all this year ... they play 5 teams in the Top 25, plus they would play 5 more to win it all, depending on how the ranking shake out and if Bye weeks are given.

Thats 10 Ranked teams ... in one year ...
I don't see that happening very often ...

That said, I don't see the Buckeyes winning it all this year.
Yes anyone here knows you 100%....Astros failed no posting...Ohio state loses we hear it.....Its ok....Its called an opinion....I have one so do you.....Problem is?
  • Like
Reactions: meStevo and Yespage
Jimbo
Yes anyone here knows you 100%....Astros failed no posting...Ohio state loses we hear it.....Its ok....Its called an opinion....I have one so do you.....Problem is?
Seeing theres very little activity in the MLB threads, it wouldn't matter if I posted that the Astros didn't make the Playoffs ...

Theres more NFL info in the Pub section than in the Sports/NFL thread.
  • Haha
  • Like
Reactions: meStevo and AZ.
Jimbo
IF they go to 24 teams, and it looks like they will soon ....
Do we Really want Teams with 3 and 4 losses in the Playoffs ?
Is a 3-4 Loss team one thats able to win 4-5 more games against Top teams ?
Y
One of the pro's I see is in a year with so many undefeated teams they have a good chance of an opening. Few years back you had lower divisions that didnt get a shot. I love collage football and I have no problem with that addition.
A 12 team playoff net should catch any undefeated team. The 12 team playoff also exposed that rankings suck. I mean, we kind of knew already that the rankings weren't particularly reproducible, but we now have the empirical evidence that the rankings suck because judging who is the best among a mickey mouse scheduled football season isn't a rational endeavor. So the 12 team playoff ensures most teams that should make it, do, including the mid-major undefeated team. 8 teams should be able to work as well, but puts greater risk at OSU and Alabama missing the playoff... can't have that.

Which is the run up to my main problem with the 24 team set up is that it is designed to keep the OSU's and Alabama's from missing the playoff. The cartels are ensuring widespread participation for their own cartels to increase the monetary reward to themselves. It is fixing the system while not fixing the outcomes, merely making the regular season game outcomes virtually irrelevant. Sure, a bye for winning the conference would be nice, but we've already seen that byes aren't that influential.
We are in what week 5 now? Been two real good ranked games to watch.....Other than that top 25 teams are playing nothing.
That is college football in a nutshell. Again, college football isn't about competition, it is about revenue. The entire setup is about making money, from regular season squash games against local jobbers like the WWF days to tax exempt bowl games.

And to add to the first world woes, the college football cartels have made being a College Football fan even more expensive... so they can get paid more.
  • Like
Reactions: osu1991 and AZ.
meStevo
Theres more NFL info in the Pub section than in the Sports/NFL thread.

Nah, you just don't understand how ignore works, which is why you made your own NFL thread thinking there wasn't one 🤣
Foxbat
They ought to have fun with this… :devilish
TheRatPatrol
Last reply · posted in TV Shows
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2135 Replies · 214798 views
Jimbo

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
  • Like
Reactions: Howard Simmons
Howard Simmons
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Tony as the director.🙄
Jimbo
Tony as the director.🙄
Would you rather have LaRoche ???
  • Like
Reactions: Howard Simmons
Howard Simmons
Would you rather have LaRoche ???
No. Bring in someone new.🤔 Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
Jimbo
No. Bring in someone new.🤔 Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
I don't think Tim and Tony are that far apart in Age ...

Remember what Tony said to Tim when they first got back together ...
Tony said: I am the New Tony, Tim .... (something to that effect)

Tony has changed, he's been running his Security Business ... I'm sure he has grown up.

Give it time ... your judging the New Tony from the old Tony.

It sounds like Tim won't be around the Team much longer either.
  • Like
Reactions: Howard Simmons
KAB
KAB
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
Jimbo
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
I'm curious how they are going to implement Tony into Origins (If they do) ...
Tony was introduced to Gibbs and the team, on NCIS, which makes it the Mothership side of things, he worked in Baltimore prior to NCIS, NO mention when they met that anyone had known one another ...
  • Like
Reactions: Howard Simmons
Jimbo
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
Teased Meeting ?
brittanygarden
Staff member Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.

If you've already reported this to me, please repost it here so I can track all instances in one thread.

Thanks!
Brittany
23 Replies · 711 views
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
bookworm370
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
GRB1959
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
Excellent suggestion.
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
BTW my bedroom H3 does not have this problem where I am using a Harmony 650. Also has there been any more feedback? Are they still working on this or what?
Foxbat
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
  • Like
Reactions: charlesrshell
JeffN9
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
I was having similar issues last night while watching and recording the NLCS game on 148. When I tried resuming the game at one point the screen went blank and I couldn't get my H3 to respond to any remote commands. Eventually the Hopper went to a HD channel but still no remote response. After a while the Hopper went into a re-boot cycle. This happened at least 3 times. I was using an IR universal remote only.

A little frustrating to have the game broken up like that but at least the Brewers won:)
bookworm370
Excellent suggestion.
Yea, I've only been a CIO for the last 30 years! :)
Trust me, when something important breaks, they get to own it!
A
Loaded H713 software on my Hopper 3 last week. Have not seen any change in the IR/RF remote issues with my Harmony 700.
Has Dish acknowledged this is a problem and are they committed to fixing it?
I'd be happy to roll back to last July.
  • Like
Reactions: charlesrshell
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
42 Replies · 3619 views
  • Like
Reactions: spongella
navychop
Bob Evans Sage.
R
Bob Evans Sage.
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
  • Like
Reactions: navychop
dfergie
They run Owens at $3.99 for lb and $7.99 a couple times a month at some grocery stores here, I actually was wrong, just checked a pork sirloin roast it was $1.99 a lb. (cooked it yesterday so pack was in trash)
  • Like
Reactions: reubenray
TRG
TRG
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

1631.webp
R
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

View attachment 194848
No Kroger's near me. I live in the heart of Walmart land. The only option besides Walmart is Harp's.
TRG
TRG
I live in the heart of Walmart land.
My deepest condolences.
R
My deepest condolences.
Surprisingly I moved here from the Gulf Coast due to the heat. But it has been hotter here due to the heat domes than it did down there.