Social Feed

R
Last reply · posted in Over the Air Television By RabbitEars.Info
Yes, it's the dreaded pixelation.....OTA antenna is on top of our two story house. We are even having trouble when a vehicle drives down the street!!! Very frustrating.
Sometimes, even during rain or overcast weather we are unable to get a signal strong enough to watch.
I've also noticed that during the weekdays, after 8:00 in the morning we receive absolutely no signal from a major network. After the afternoon hours, 3:00 or so... it magically re-appears.
I don't imagine this is going to be simple, is it?:eek:
20 Replies · 6287 views
C
Splicer: I like the price on that amp. I also like the fact that the power brick uses regular RF coax to feed the amp. Why do you favor the Motorolas?
Splicer
It isn't that I prefer the Motorola. But they are the easiest to find, generally. ANY pre-amp like the Motorola will do just fine and have the same specifications. The NexxTech amp I use (see my signature) is the exact same thing, just a different brand name. Now I got mine as a display unit and paid $7 shipped for it. That is the least expensive I have ever found one though. But eBay has low price amps that do not always get bid up too high.

Here is another pre-amp that has the exact same specs as well, is $17 cheaper, is smaller, and is a quality pre-amp that will work just as well: Channel Master CM 3410 Ultra Mini Distribution Amplifier (CM3410) - Channel Master - CM3410 - 020572034104 - CM3410 CM 3410 indoor amplifier distribution amplifier channel master CM 3042 CM-3042 CM3042 CM 3042 CM-3042 QXMM
R
Wow guys...I'm a bit overwhelmed with all the great info..http://support.radioshack.com/support_video/doc73/73446.pdf
has the info on what it is I'm supposed to smash, but I don't think the hubby will approve till I can prove out it's bad. I did remove the unit totally from the system. Plugged in my antenna directly to the splitter for the T.V.'s. No signal. So, for now, I guess I'll have to put up with the intermittent problem when it breaks up till spring.
Kind of at a standstill anyway. Haven't had cable in years because it is to expensive, and our investment all those years ago paid off in the long run. During the conversion we got the converter boxes-(used the coupons to help cut the cost) and a new rotor and (I think this thing is a booster?). So what we have now is about all the money we have for any more improvements.
You all are great and have lots of info on all of this. By far, the best forum I've tried for information.
I don't have any fancy T.V. or any of the bells and whistles, just trying to get by on what is, yep...FREE!
Splicer
Unless you got on the roof and physically removed the mast mounted amp, just removing the power supply will result in zero signal. Once you can safely get on the roof to remove the mast amp, let us know and we will pick up where we left off.

There is no doubt some more money will be required to get you going right. But we will keep the amount to a minimum regardless of what is needed. As for the rotor being a booster? No. The rotor only turns the antenna to the direction you want it pointed at. Has nothing to do with increasing the signal beyond that.

Good luck, let us know, and Merry Christmas!
C
Well, you can't prove that the amp is bad until you've replaced it with something good, but in the mean time, you can take our word that the Radio Shack amplifiers are all bad news. The biggest enemy of digital TV reception, aside from distance, is noise. Any noise that your antenna collects is bad, and any amplifier is going to amplify that noise as well as create noise of it's own. RadShack amplifiers tend to inject a disproportionate amount of noise for the amplification they provide. With rare exception, they're junk; as good as snake oil in the days of analog TV, and pure rat poison in the modern age. Any amplifier also adds complexity and an additional point of failure in the system, and RadShack amplifiers are notorious for short service life compared to quality units by Winegard, Channel Master, and...Motorola...I guess. :)

Splicer's right, without taking the mast down and removing the actual amplifier (so far you've only removed the power supply for the amplifier), your signal will not improve at all. I maintain that you don't need amplification, even for three TVs, at only 25-ish miles out. When you take the antenna down, unless you actually use the rotator, get rid of it, too. Again, reduce complexity and remove the extraneous points of failure. Maybe somebody on CraigsList will buy it from you. Also when you take the antenna down, replace the balun with a good one from Channel Master or Perfect Vision, just for good measure.

The troubleshooting phase is cheap; a couple of coax splices and a new balun will eliminate the variables for under $10. It's labor-intensive, though, and trips to the Emergency Room are never cheap. So for now, play it safe, but we're pretty sure that we know where your problem lies...
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68648 Replies · 2679658 views
  • Like
Reactions: c-spand
Bobby
If Love Must Go - Dobie Gray
FTA4PA
Drift Away - Dobie Gray
long_time_Dish
Throwing It All Away - Genesis
dishstaller
All I Need is a Miracle - Mike + The Mechanics
  • Like
Reactions: gms49ers
gms49ers
Sweet Miracle - Rush
TheForce
Supporting Founder Pub Member / Supporter
Last reply · posted in The Phone & Tablet Zone
Apple Fall Hardware Event takes place today, September 9, 2026, at 10:00 a.m. PT / 1:00 p.m. ET. It marks the debut of new CEO John Ternus and the expected reveal of Apple's first foldable phone.
136 Replies · 1723 views
Foxbat
IFixIt has published their Teardown and they had some positive things to say about the iPhone Duo. It still showed some dust ingress into the hinge assembly but seemed otherwise well-sealed.
​

But with a considerable number of reports of the main screen dying with similar failures, AppleCare+ should be a no-brainer for this phone.
S
IFixIt has published their Teardown and they had some positive things to say about the iPhone Duo. It still showed some dust ingress into the hinge assembly but seemed otherwise well-sealed.
​

But with a considerable number of reports of the main screen dying with similar failures, AppleCare+ should be a no-brainer for this phone.

hope you have apple care a screen job is 1000.00 :oops:. can we say over priced garbage!!!
harshness
Gone are the days when Apple "perfects" what debuted years earlier on an Android phone.
comfortably_numb
Gone are the days when Apple "perfects" what debuted years earlier on an Android phone.

Or better yet, innovate something "completely revolutionary!"
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 3 views
T
Last reply · posted in DISH Network Support Forum
I was bewildered with all the new DISH TV "Bonus View" channels, so I put together a web page table with all the info I could find. It's at:

https://anythingpeaceful.org/dishtv/DISH_TV_Bonus_View_Channels.html

Here's a partial screenshot of the table, as sorted by Channel Name. (You can click on a column header to sort.)

screenshot.jpg


If you have any corrections or suggestions, please post here.
44 Replies · 5937 views
T
Paranormal Files back in business:

1788455787917.webp
T
Two new Bonus View channels Added today:

pic.webp


And two Removed:

pic2.webp


My full list is at: DISH TV "Bonus View" Channels

Thanks to Pat for the heads up.
T
One Bonus View channel added today. And one correction (on my part):

added and corrected.webp


One Removed:

removed.webp


My full list is at: DISH TV "Bonus View" Channels

BTW, not a Bonus View item, but there was a temporary channel 304 Spooktacular added, I imagine just for the Halloween season.

Thanks again to Pat for the many tips.
  • Like
Reactions: charlesrshell
T
Three new Bonus View channels today:

pic.webp


My full list is at: DISH TV "Bonus View" Channels

As always, thanks to Pat for the tips.
T
Four Bonus View channels removed today:

pic1.webp
  • Like
Reactions: charlesrshell
Van
Van
Last reply · posted in What's Cooking?
Who says dinner or lunch has to be the only good meals of the day?

Honey butter grits with scrambled eggs and grilled boneless pork ribs on flakey biscuits washed down with cranberry juice.
6635 Replies · 380128 views
TRG
TRG
2 egg burrito with bacon and a side of hashbrowns. Coffee.

1645.webp
TRG
TRG
Breakfast Quesadillas. Grilled flour tortilla filled with scrambled eggs, hash browns, chopped green chile, cheddar & Jack cheese and bacon. Coffee.

q.webp
Bobby
Taco omelette. 3 eggs, taco meat from yesterday, diced green chilis, cheddar cheese, chopped red onion, avocado, black olives, chopped tomato, La Victoria Salsa Brava.

This one was really, really good!
  • Love
  • Like
Reactions: TRG and dfergie
dfergie
Thought I was getting a Chorizo and egg burrito (marker had rubbed off)but was a roast beef/potato I made up before hunting this morning.
Btw every morning at camp I cooked my homemade Chorizo and scrambled eggs plus sausage side while my brother brought bacon. (they liked both the beef and pork versions)
  • Like
Reactions: TRG
TRG
TRG
Thought I was getting a Chorizo and egg burrito (marker had rubbed off)but was a roast beef/potato I made up before hunting this morning.
Btw every morning at camp I cooked my homemade Chorizo and scrambled eggs plus sausage side while my brother brought bacon. (they liked both the beef and pork versions)
I had a chorizo and egg burrito for you. With lots of green chile and cheese of course.
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
29 Replies · 1604 views
  • Like
Reactions: LQQK and reubenray
Almighty1
So after some heavy research, it looks like the issue I mentioned with the DISH 50.0/52.0/54.x remotes where on the 50.0/52.0 remotes, the dedicated TV Power button or on the 54.x remotes where it is using the TV button on the side followed by Power works correctly on a Hopper 3 which runs Linux but not on a Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 which are Android TV (ATV) has to do with the Android TV software itself. In all instances, the remotes had always sent out a dual RF and Infrared signal when the TV Power signal is sent from the remote. The Hopper 3 without the Plus would ignore the incoming RF power packet signal which is identified as a TV-specific toggle event, and does not trigger a system-wide standby state. The Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 as Android TV devices initially worked the same way as well up to sometime in 2025 as there was the legacy pass-through mode in the original software versions used since the Hopper Plus/Joey 4/Wireless Joey 4 launch, the receiver's underlying software essentially ignored the secondary RF payload that the 50.0/52.0/54.x remotes blasted out whenever the TV Power signal was sent. The Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 recognized it was a TV-specific command and discarded the RF packet, letting the standalone IR signal do its job on the tv.

When the software for the Hopper Plus, Joey 4 and Wireless Joey 4 were updated in 2025 and newer versions of the software for those Android TV (ATV) devices, it overhauled how the receiver handles remote commands to tighter integrate the Android TV environment which resulted in the software starting to treat any RF power toggle payload as a global command. As the newer software verion(s) no longer filters out the concurrent RF blast from the 50.0/52.0/54.0 remotes, the moment one sends a TV Power signal from the remote, the Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 catches that unintended RF payloadand interpets it as a command to drop the system into standby.

The fix is really simple since the Android TV (ATV) software for the Hopper Plus, Joey 4 and Wireless Joey 4 just needs to be programmed to drop or ignore the specific RF power packets associated with the TV Power signal sequence.

The problem could also be at the remotes firmware as the remote's firmware has an engineering defect. When you try to turn off the TV, the remote's internal code mistakenly triggers its RF transmitter alongside its IR transmitter. It should only be firing the IR light blast. Because it forces a simultaneous broadcast, the remote's firmware is the original source of the problem.

The Hopper Plus, Joey 4 and Wireless Joey firmware has a filtering defect. Good software design dictating peripheral inputs should include "error handling"—rules that tell the system what to do with messy or unintended commands.
• The legacy Hopper 3 firmware has proper error handling; it sees the remote's rogue RF packet and safely ignores it.
• The Android TV firmware in the Hopper Plu, Joey 4 and Wireless lacks this filtering logic. It blindly accepts the rogue RF packet and misinterprets it as a legitimate signal to force the entire system into standby.

If the remote didn't have a firmware bug, it wouldn't send the phantom RF signal. If the Android TV (ATV) device being the Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 didn't have a firmware bug, it would cleanly ignore the signal just like the Hopper 3 does.

brittanygarden and Rick Durham
rvvaquero
That's a lot of information to ingest. However, I don't have the Hopper Plus and my 54 remote is doing crazy things to the Hopper 3. Several times each evening when I press the skip forward button several times to advance through a commercial, it switches the receiver either onto live TV or into suspension. Other buttons will also cause this randomly, I haven't established any patterns I can describe. I use "recall" to go back to my recorded program in progress.

Needless to say, something in the newer Hopper 3 softwares has caused the remote functioning to ......................malfunction. Evidently, it applies to third party remotes as well as DISH's own remotes.
GRB1959
That's a lot of information to ingest. However, I don't have the Hopper Plus and my 54 remote is doing crazy things to the Hopper 3. Several times each evening when I press the skip forward button several times to advance through a commercial, it switches the receiver either onto live TV or into suspension. Other buttons will also cause this randomly, I haven't established any patterns I can describe. I use "recall" to go back to my recorded program in progress.

Needless to say, something in the newer Hopper 3 softwares has caused the remote functioning to ......................malfunction. Evidently, it applies to third party remotes as well as DISH's own remotes.

This is exactly the same issue I was having as I had the Hopper 3 and 54 remote without the Hopper Plus and the symptoms were virtually identical to yours.
  • Like
Reactions: charlesrshell
ERSanders
We have had a corolary problem in this and the prior s/w. Using several different 40.0 remotes (yeah, we're old), when one pauses a live or recorded show it becomes a crap shoot whether it will step foreward the 30" as requested, jump to the end, or restart the episode. Tried the famous 60" reboot to no avail and have decided to live with it vs. a receiver swap risk.
T
I think there's a change to the "skip forward 30 seconds". With CBS that does not have auto-skip, if you stack up a bunch of 30 second forwards it seems to stop when the kangaroo signaling the end of the commercial break appears.
dishstaller
Pub Member / Supporter Lifetime Supporter
· posted in The Phone & Tablet Zone
We were up in Pigeon Forge, TN a month ago and we couldn't get anything on our phones to work on mobile data...the Ookla speed test app couldn't even do a speed test. I have an older 13 and went into my settings and turned off the 5G, making it use LTE exclusively....did a speed test of over 300mbps so obviously the 5G bands were overwhelmed. Anyway, tried to do the same thing on my Wife's 15 and the cellular data options tab simply wasn't there. Any of you run into this? We've on Verizon
0 Replies · 15 views
osu1991
Pub Member / Supporter
Last reply · posted in TV Shows
9 Replies · 156 views
meStevo
First 2 eps out and it's unsurprisingly great to watch Paul Bettany and James Spader work.
osu1991
Watched the first episode and enjoyed it.
Foxbat
James Spader gets the best lines so far. I'm enjoying this series.
  • Like
Reactions: MikeD-C05
osu1991
Finished the 2nd episode tonight. I'm really liking it so far.

Still hate weekly releases though, especially the way Disney and HBO do it waiting until 8pm to premiere it.
Foxbat
Apparently I'm not a big enough nerd🤓 since I did not read every Marvel Comic Book ever published. If I had, I might be comparing the comics' version of events compared to what's transpiring in "Visionquest". So, I am enjoying the series a lot, not weighed down by previous expectations, knowing only the Avengers MCU movies and the "Wandavision" / "Agatha All Along" TV series.

I found the Mr Know-it-All channel from his discussion about "Star Trek: Strange New Worlds" and he's been gleefully picking these episodes apart, referencing the Marvel comics from the 1939 on. Turns out A.I. has been around since before World War II, at least in the comics. (Robots before that, yes, yes.) This show is going back into the archives.
  • Like
Reactions: osu1991
TheForce
Supporting Founder Pub Member / Supporter
Last reply · posted in The Phone & Tablet Zone
It's time for my wife to get a new iphone as her iphone 12 is getting weak battery life test says 70% compared to when new. But it is beginning to show signs of screen freezing as well.
211 Replies · 15147 views
Foxbat
It may be the year to update my 13 to the 15.
Foxbat
BTW, iOS 26.1 is now out for iPhone, along with the OS 26.1 updates for all other supported Appley iDevices.
osu1991
Bought a Motorola G Power 5G android phone as a spare and to use for some work stuff. Was tired of work stuff cluttering up my iPhone 16 Pro. Didn't take long to remember why I originally went to an iPhone. 4hrs doing updates to step up from Android 14 updates to Android 15 and latest updates for 15. Ads on the Play store above the app I searched for is something I don't really remember from the last android phone I had 13-14 yrs ago. Face ID on iphone has spoiled me too.

I just wanted a cheap phone mainly for work pictures or I would have got an 17 Pro and used my 16 for work stuff, but no need to spend that kind of money. I don't even have cellular service on the Motorola, just using it on WiFi and added my google voice number to it with the app.
  • Like
Reactions: navychop
Foxbat
Apple released their 2025 Holiday video. Friendly forest fauna find forgotten phone…
​

There's also a behind the scenes "Making of" video, too:
​
Foxbat
BTW, iOS 26.1 is now out for iPhone, along with the OS 26.1 updates for all other supported Appley iDevices.
BTW, iOS 26.3 is now out for iPhone, along with the OS 26.3 updates for all other supported Appley iDevices.
1770953531617.png
Foxbat
It may be the year to update my 13 to the 15.
Apple made me an offer I couldn't refuse. For whatever reason, they bumped up the Trade-in value of my iPhone 13, first to $180, and just recently to $195. So I took the Apple Cash from Apple card savings and the $195 trade-in and have a shiny new iPhone 17 nothing. The base 256 GB is more than enough for my needs.

Now I'm on the lookout for a leather case for it…
  • Like
Reactions: osu1991
Foxbat
My iPhone 17 is now running iOS 27.2 (whatever happened to 27.1.x?) and it looks like all the other Apple devices that can are releasing 27.2 (looks like it came out Monday)