Social Feed

teid

Last reply Aug 12, 2010 · posted in DISH Network Support Forum

Dish Re-Pointing Questions

Existing Setup:

I currently have one dish pointed @ 110 and 119 (American Channels) and another dish pointed @ 61.5 (HD and international channels). I honestly do not know which switch I currently have with this setup.

New Setup:

In order to receive newly added channels, what I now need is to pick up channels from 110 and 119 (American Channels) and from 118.7 (International Channels) and 72.7 (HD Channels). I will no longer need to be pointed to 61.5 after that.

Can someone tell me how many and which dishes do I need for the new setup combined with which switch (es)?

Thanks.

6 Replies · 1984 views

Load Replies (6) Reply Legacy View

RandallA

Aug 3, 2010

Hmmm, since you have 61.5 in your setup I would call Dish Network and ask them if they can upgrade your dish to a 1000+ (119, 118.7,100, 129).

Did you receive anything in the mail about upgrading your dish equipment? You have HD channels and Internationals, you should have received something in the mail or a call.

Jimmerinwi

Aug 3, 2010

If you have all VIP receivers, they may go with an eastern arc dish with a 500+ dish for your 118.7 internationals. If you have mPeg2 receivers, then 500+ with a wing dish for 72.7 for all your core HD. Hopefully for your sake, I hope you don't get your HD locals from 61.5. If you do, you have a decision to make. A 44 switch is what the name states "4" sats in, "4" receivers out. If you have 61.5 for HD locals, you need to decide, 110, 119, 118.7, 129 or 110, 119, 118.7, 72.7 or 110, 119, 118.7 61.5. There are ways to get 5 sats into a 44 switch, but nine of ten installers are not goig to know how to do it. Probably best bet is the EA dish with the 500+ wing dish. That would give you 61.5, 72.7, 77 and 118.7, (with a 44 switch) that would cover all the bases I believe!! Good luck!

TimberWolf

Aug 10, 2010

If your locals are on 61.5
and you have mpeg4 recs
and don't plan on adding more int'l channels
you can switch to the 1K.4

If your locals are on 119 or 110
and you have line of sight to 129
you can switch over to the 118.7 dish with an extra lnb for 129 (1000+) and a dpp44

R0ss

Aug 12, 2010

teid said:
Existing Setup:

I currently have one dish pointed @ 110 and 119 (American Channels) and another dish pointed @ 61.5 (HD and international channels). I honestly do not know which switch I currently have with this setup.

New Setup:

In order to receive newly added channels, what I now need is to pick up channels from 110 and 119 (American Channels) and from 118.7 (International Channels) and 72.7 (HD Channels). I will no longer need to be pointed to 61.5 after that.

Can someone tell me how many and which dishes do I need for the new setup combined with which switch (es)?

Thanks.

It would help to know where you live, it does make a difference. Also what and how many receivers you have.
Things to keep in mind are that the 72.7 is MPEG 4 which might require you to up grade a receiver depending on what you are using now. Are you sure you won't need 61.5 for anything at all? locals? According to what I read on this forum Dish is trying to get away from so called hybrid or mixed solutions unless you set this up your self you might not be able to get Dish to do exactly what you want...
As far as the existing switch goes if you have a cable running from the 61.5 to the 110/119 then you have a built in switch. Depending on what yo end up doinf you may need a SW44 which also requires an external power supply. I think it is also recommended to protect it from the elements.

Good luck

Ross

teid

Aug 12, 2010

Thanks for all the responses so far.

I live in NH close to the Boston area. Unless I am wrong, I have my HD locals (Boston) on 61.5. Also, I have 4 VIP-211 receivers. I have not received anything from Dish regarding re-pointing.

Based on that, what do you guys recommend as far as dishes and switches?

Thanks again.

View all replies (6)

Bobby

Supporting Founder Lifetime Supporter

Last reply 15 minutes ago · posted in DISH Network Support Forum

Dish 4K Event Listings (No Discussion)

This is a thread that will keep you apprised of 4K events that will be showing on Dish channel 540. Keep looking here for information.

As of today, 9-27-17, there are no scheduled events posted for the next 2 weeks. That is subject to change on a daily basis.

769 Replies · 168208 views

Load Replies (769) Reply Legacy View

Reactions: HipKat, bryanw20 and charlesrshell

Bobby

Friday at 2:55 PM

MLB, Rays at Brewers, Saturday 10-24, 5PM PDT, Channel 148-01.

Reactions: charlesrshell

Bobby

Friday at 2:57 PM

MLB, Brewers at Rays, Monday 10-26, 5PM PDT, Channel 148-01.

Reactions: charlesrshell

Bobby

Friday at 2:59 PM

MLB, Brewers at Rays, Tuesday 10-27, 5PM PDT, Channel 148-01.

Reactions: charlesrshell

Bobby

Monday at 5:13 PM

CFB, Florida vs Georgia, Saturday 10-31, 12:30PM PDT, Channel 148-03.

Reactions: charlesrshell

Bobby

15 minutes ago

CFB, Wisconsin at Iowa, Saturday 10-31, 9AM PDT, Channel 148-01.
CFB, Arizona St at BYU, Saturday 10-31, 12:30PM PDT, Channel 148-01.

Reactions: charlesrshell

View all replies (769)

Neutron

Supporting Founder

Last reply 16 minutes ago · posted in The Chit Chat Club

RIP Patrick Stewart

Patrick Stewart died yesterday, October 28th at the age of 86. We lost yet another great actor.

Patrick Stewart, ‘Star Trek’ Captain and ‘X-Men’ Superhero, Dies at 86

He’s forever known for playing Jean-Luc Picard and Charles Xavier, whom he “admired for their morality, for their kindness, for their sensitivity, for their compassion.”

www.hollywoodreporter.com

3 Replies · 21 views

Load Replies (3) Reply Legacy View

Reactions: Bobby, Foxbat and osu1991

telstar_1

Today at 4:18 PM

Reactions: sdfntx

dfergie

34 minutes ago

This hits hard, R.I.P. ...

Foxbat

16 minutes ago

Rest in Peace…

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply 25 minutes ago · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68660 Replies · 2680333 views

Load Replies (68660) Reply Legacy View

Reactions: c-spand

harshness

Today at 11:25 AM

I'm Easy - Keith Carridine

Reactions: Bobby and RaiderPower

gms49ers

Today at 11:41 AM

It's Easy - Boston

Reactions: long_time_Dish

RaiderPower

Today at 12:33 PM

Take It Easy On Me - Little River Band

Reactions: long_time_Dish and dishstaller

long_time_Dish

Today at 2:42 PM

Take It Easy - The Eagles

Reactions: sdfntx and gms49ers

sdfntx

25 minutes ago

Take It as It Comes - Steve Winwood

View all replies (68660)

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply 30 minutes ago · posted in The Chit Chat Club

I think we could all use a laugh - Rodney Dangerfield on Carson

Good...simple humor. Enjoy

View: https://www.youtube.com/watch?v=E92AtfTLge4

View: https://www.youtube.com/watch?v=HJy0WnejlF4

5 Replies · 73 views

Load Replies (5) Reply Legacy View

Reactions: dfergie

Jimbo

Today at 12:37 AM

Not Rodney, but a laugh ...

View: https://www.youtube.com/shorts/WHEcmortfK0?feature=share

dishstaller

Today at 10:27 AM

Sorry for posting the wrong link. Just corrected it.

Reactions: Foxbat

dfergie

Today at 3:44 PM

I loved it when Rodney was on the Tonight Show...

Foxbat

Today at 3:52 PM

dishstaller said:
Sorry for posting the wrong link. Just corrected it.

Thanks, I wasn't sure if you had the wrong Subject or the wrong YouTube link.

osu1991

30 minutes ago

Was a Don Rickles fan. I've dvr'd most of his appearances on Carson from the antenna tv replays.

"MysteryMan"

Pub Member / Supporter Cutting Edge

Last reply Today at 3:48 PM · posted in Computers and Gadgets

Windows 10/11 Download

I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.

524 Replies · 48057 views

Load Replies (524) Reply Legacy View

Reactions: dfergie, Tom Speer, Scott Greczkowski and 1 other person

EarDemon

Oct 13, 2026

If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.

WhiteBeard

Oct 13, 2026

EarDemon said:
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.

To each there own but I've found that Windows can't do much more than Linux can. Can't have everything.

Reactions: meStevo

EarDemon

Oct 14, 2026

WhiteBeard said:
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything.

For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.

I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.

harshness

Oct 15, 2026

EarDemon said:
I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows.

What is so fantabulous about the Windows UI? By many accounts, it has been going downhill since Windows 7.

There are Linux desktops that offer Windows or Mac UIs, yet you don't hear much chatter about them outside of questions about when the creators might get sued.

Reactions: HipKat

EarDemon

Oct 15, 2026

harshness said:
What is so fantabulous about the Windows UI?

Because it's what I prefer. I know I've said this a few times, I use Open Shell to give me the cascading start menu a la WIN 95 and NT4.0. The only reason I went from Windows Vista to 7 back in the day was because of Classic Shell. I cannot stand anything other than the OG start menu from 30+ years ago. I'm using ExplorerPatcher to give me Windows 10 UI elements of the taskbar and right click context menus.

If you could take a look at how I set up Windows 95, you'd find many similarities to how I use 11.

Reactions: cp2k

EarDemon

Oct 15, 2026

I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.

harshness

Oct 16, 2026

EarDemon said:
Because it's what I prefer.

I hope you don't believe that makes it wonderful (especially when you're using workarounds for Microsoft's malfeasance).

I use LibreOffice as opposed to Microsoft office (even in Windows) because it's UI is like the Office of old, so I'm putting my money where my mouth is (in a manner of speaking). The ribbon was one of the worst ideas to come out Redmond.

HipKat

Oct 16, 2026

EarDemon said:
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.

I used to pin the C: drive to the Win Taskbar and it would open in cascading style

"MysteryMan"

Yesterday at 2:25 PM

2026-10 Preview Update Builds: 26300.9818 and 26200.9818 (KB5127936) has been released. Moderate time needed for those choosing to perform a manual download/install/restart. Quality improvements only. No new operating system features.

Reactions: Tweek

JSheridan

Today at 3:48 PM

Actually it looks like there are a lot of features new or updated, although most are on a gradual rollout schedule.

KB5127936 Windows 11 Cumulative Update Preview build 26200.9818 (25H2) and 26300.9818 (26H2) - Oct. 28

Microsoft Support: This cumulative update for Windows 11, versions 26H2 and 25H2 (KB5127936), includes production-quality improvements. Announcements and messages This section provides key notifications related to this release, including announcements, change logs, and end-of-support notices...

www.elevenforum.com

View all replies (524)

MartyDe

Last reply Today at 3:20 PM · posted in Over the Air Television By RabbitEars.Info

ATSC 3 converter boxes

Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.

Pearl TV Issues Progress Report on Low-Cost 3.0 Converters in Advance of NAB Show New York

Group has secured lower pricing from key tech players to make less costly boxes available

www.tvtechnology.com

13 Replies · 751 views

Load Replies (13) Reply Legacy View

navychop

Oct 20, 2026

DEATH TO NEXGEN!

Reactions: Redbullsnation, primestar31, RaVo68 and 2 others

primestar31

Oct 21, 2026

navychop said:
DEATH TO NEXGEN!

It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.

Reactions: RaVo68, Redbullsnation, slow_poke_pete and 2 others

Mister B

Oct 22, 2026

What bothers me is the total waste of broadcasting spectrum in this very crowded market. It has been almost three years now since KFOX converted their broadcast tower to ATSC 3.0 and moved all of their channels to other towers causing noticeable degradation of the picture quality.
I have a Sony TV with 3.0 capabilities but still use the 1.0 version of locals due to the fact that one or all of the 3.0 channels are often missing or unwatchable. In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.
The only thing that could motivate me to be interested in 3.0 would be if all of the minor networks (diginets) could be in at least 720P rather than blurry ultra-compressed 480i.
Three years is long enough to waste one of the few available RF frequencies in the area for this trial.
It is time to either move on with this experiment or call it quits.

navychop

Oct 22, 2026

Mister B said:
It is time to either move on with this experiment or call it quits.

QFT. Of course, my preference involves a curb and some kicking.

Reactions: FTA4PA

slow_poke_pete

Tuesday at 5:37 PM

primestar31 said:
It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.

WHAT ABOUT THE INTERNET PART OF IT. NO ONE WANTS A BOX CONNECTED TO THE INTERNET EITHER.

navychop

Tuesday at 9:47 PM

Cough, cough. COVID vaccine implants.

:oldlaugh

Reactions: HIFI

Foxbat

Yesterday at 6:39 PM

navychop said:
Cough, cough. COVID vaccine implants.

That would be handy. Download the latest RNA snippets that can be updated over 5G and no more shots! You're a Genius!

Reactions: navychop

Redbullsnation

Today at 3:20 PM

I want it and I have to have it.

I can neuter the phoning home with adguard home so it won't be doing that in my castle but I prefer without Internet so that my TVs in the house don't turn into e-waste

View all replies (13)

mheisen

Last reply Today at 2:50 PM · posted in DISH Network Support Forum

Hopper 3 with Hopper plus internet connection problems

Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?

1 Replies · 101 views

Load Replies (1) Reply Legacy View

Almighty1

Today at 2:50 PM

mheisen said:
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?

I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?

Reactions: charlesrshell

dishstaller

Pub Member / Supporter Lifetime Supporter

Today at 2:43 PM · posted in The Chit Chat Club

New report states 29% of vehicles being traded in are under water

It states the average amount they are under water is OVER $7,000. :eek

Personally, I tend to be the type that drives a vehicle for a lot of years....do my own oil changes and other fluid changes. Just replaced the spark plugs and a couple coils. Youtube is great for things like this.

Nearly 3 In 10 New-Car Trade-Ins Are Underwater, Edmunds Finds | ZeroHedge

ZeroHedge - On a long enough timeline, the survival rate for everyone drops to zero

www.zerohedge.com

0 Replies · 15 views

Replies Reply Legacy View

Reactions: navychop

jamieh1

Last reply Today at 2:32 PM · posted in DIRECTV Programming Forum

FAST Channels added to DIRECTV Stream/Internet

DIRECTV Stream/Internet added Ch 4105 SportsGrid

268 Replies · 38733 views

Load Replies (268) Reply Legacy View

Reactions: c-spand and KyL416

KyL416

Sep 9, 2026

Now live:
4101 Yahoo! Sports Network
4121 DP World Tour
4195 F1 Channel
4196 MotoGP Channel

Reactions: Mr Tony, RaiderPower, mario315 and 1 other person

KyL416

Sep 22, 2026

Now live:
4275 Law & Crime
4364 Military Makeover Channel

Reactions: Mr Tony, mario315 and RaiderPower

KyL416

Oct 6, 2026

Game Show Central is now live on channel 4342

Reactions: Mr Tony, mario315 and RaiderPower

KyL416

Oct 20, 2026

KyL416 said:
Now live:
4101 Yahoo! Sports Network
4121 DP World Tour
4195 F1 Channel
4196 MotoGP Channel

It only took them 41 days to announce it

Reactions: Mr Tony

KyL416

Today at 2:32 PM

Now testing:
AyM Sports 3 USA
Best Bets TV powered by VSiN
CBS Sports Golazo Network
CBS Sports HQ
Judge Judy

View all replies (268)

TWiT Tech Podcast Network

Today at 2:22 PM · posted in TWiT Tech Podcast Network

Tech News Weekly 461

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=7E4fkSffYKA

Direct YouTube Link - Tech News Weekly 461
TWIT's Website
TWIT Live Feed

Search

Search

Social Feed

Dish Re-Pointing Questions

Dish 4K Event Listings (No Discussion)

RIP Patrick Stewart

Patrick Stewart, ‘Star Trek’ Captain and ‘X-Men’ Superhero, Dies at 86

Song Name Game Part 3!

I think we could all use a laugh - Rodney Dangerfield on Carson

Windows 10/11 Download

KB5127936 Windows 11 Cumulative Update Preview build 26200.9818 (25H2) and 26300.9818 (26H2) - Oct. 28

ATSC 3 converter boxes

Pearl TV Issues Progress Report on Low-Cost 3.0 Converters in Advance of NAB Show New York

Hopper 3 with Hopper plus internet connection problems

New report states 29% of vehicles being traded in are under water

Nearly 3 In 10 New-Car Trade-Ins Are Underwater, Edmunds Finds | ZeroHedge

FAST Channels added to DIRECTV Stream/Internet

Tech News Weekly 461