But let's assume that someone is scanning only one satellite, or has multiple LNB's or dishes, so that there isn't any dish movement going on. I would not expect to be doing this with motoring myself.
That's basically what those guys I told you were doing but i think they aren't doing it anymore (they included a CD, World Of Satellites, with the tele-satellite magazine), or at least their info i think it's no longer available as it was before, they had dish farms with one or more LNB pointed to a satellite and receivers constantly scanning and reporting the info to their servers.
I mean... it can be done, what i've done is using four receivers at the same time, one per parabolic dish (and two in a single dish), so while one C band antenna is parked at 116°W scanning C/Ku with a Pansat and a CaptiveWorks CW700s (I've find that useful for weak signals), there's another at the same time parked at 113°W scanning C/Ku with a Fortec, and a third one scanning 105°W C with a Pansat, i do three consecutive scans.
Once the scans have been completed (10-15 minutes), I move the antennas, so now i have:
One at 103°W
One at 101°W
One at 99°W
And so on and on... and that not counting the Ku offset dishes parked at 72°W, 91°W, 105°W and 99°W or at times 97°W, connected via a DiSEqC to a Pansat.
It saves me up a lot of time, at least 15min per satellite, altough most of the time what i've been looking for has already been found by rick's people (the best at hunting feeds, just don't ask because i think it can't be mentioned here), but i like to do it and from time to time stumble upon things that caught my attention.
Altough i'm pretty convinced that a BLSA would cut my scanning time an awful lot.
=)
Cheers!
Mike