Re: [VOOM] OTA Reception
i just had a 3 receiver set up last week, this is what i can tell you.
#1 i have 3 cables coming in, 2 satellite 1 antenna. they will want to
use a diplexor to combine the satellite and antenna cables, some say
this is not a good idea, mine works. the 3 cables will come into your
house and connect to a provided multiswitch,there will be 3 cables
going out of the multiswitch to supply your 3 receivers. i think you
are allowed 150ft of cable for each box. #2 you can probably split the
signal to feed 4 tv's...but every tv will have the same channel. i
think the rf output would work for this. i think it is located next to
the dvi output.#3 not sure about this one. #4 i would think if you had
2 receivers next to one another that the remotes would work both
receivers. why not split that signal(use 1 receiver for both set ups
and use the other receiver somewhere else)? #5 i think the only cables
provided are the rg6, componant and dvi. no s-video or optical. #6 you
may need power for an amplifier for your antenna if you happen to need
extra power to pick up a good signal. being only 10 miles from the
tower that is unlikely.#7 not sure about that one. #8 request an
upgrade if necessary. i think you get 2 upgrades a year. if you get
much rain you will probably have rain fade..it is a known problem. i've
requested and been granted a bigger dish, 24in. i think, they are
putting it up next friday. good luck with your install! you will love
the voom picture on your hdtv...i do! the standard def tvs look alot
better too. now we just need a dvr....hopefully in march.
--
snaggerbob
------------------------------------------------------------------------
This message was posted via
http://www.satelliteguys.us by snaggerbob
------------------------