I can reaim aT EA after I get this operational, at this point I need to know if I can use a dp34 or a splitter, once I hook up cable from DP lnb's that are daisy chained, 61.5 single to 119 dual , 110 dual down to 2-1 switch/splitter/? on the single port side, then off 2 port side, the 2 cables , 1 running to 722, the other running to 211k.
This results in the receivers losing sat signal and when you do a point at dish, it locks onto 119 or 61.5 for 2-3 secs. then turns red and reads 110 wrong sat. If I hook it up as described earlier with cables from receivers split to 2 sides of sw. the dual tuner works but 211k can't find any sats. Every time I run a check sw. in this configuration I get the warning that less sats have been found and I'll lose channels, so I'm afraid to save settings.
Thats what makes me think what I think is a splitter up near the dish is not, could this be the diplexer for running 2nd tuner on dual? and I just need to find a 1-2 splitter?
I'm between Rochester and Buffalo if that helps, Help!