Social Feed

Call On Me - Chicago

Call Me - Blondie

Cattle Call - Eddy Arnold

CALL Of The Wild-Chris Ledoux

Wild Thing - The Troggs

I have read that some have converted this type dish but after giving it a good look, it's the lnb conversion that is the bottleneck. Does anyone have a picture of their attempt to configure the lnb? I watched a video on youtube from the save it for parts guy and he used duct tape! Guess it worked but I'm thinking something a bit more permanent!
Thanks to all for your interest and replies...

Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2

To add: 101W Ku seems to be (one of if not the) strongest for me, and if I only had Ku I definitely want 101W for the music mux, it's robust FEC and strong signal help a lot. I've thought about using a used Dish/DirectTV dish at my Dads to supplement his OTA (mainly for my benefit when I visit )

I used a 60cm Shaw Satellie dish (60e) with its original dual-LNB. It worked fine for 101W/97W or 99W/103W at that time when weather was fine. But the fade margin was small so rainy weather killed reception or almost so. But it was all free since they're so plentiful so I couldn't complain.

A Shaw dish with the linear LNBFs are as rare as hens teeth in the US...

Agreed, it mostly regurgitates known solutions. That's the point. Nobody needs an innovative fix for a driver error or a creative way to format a report. Let it handle the solved problems so people can spend their time on the ones that aren't.

meStevo said:

Agreed, it mostly regurgitates known solutions. That's the point.

Click to expand...

That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.

harshness said:

That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.

Click to expand...

Addressed by what you didn't quote. This cycle is as old as computing: compilers, libraries, frameworks each automated the tedious part, and the human work moved up a level. Innovation didn't end; it shifted. And people still make new compilers, libraries or frameworks.

Nobody's forced to hand anything off. Anyone who wants to keep doing it by hand still can, and people who couldn't do it at all now can.

meStevo said:

... and people who couldn't do it at all now can.

Click to expand...

Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.

harshness said:

Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.

Click to expand...

You're not wrong, but that's part of learning. Whether from others or our own mistakes, we've all learned that lesson one way or another.

meStevo said:

Whether from others or our own mistakes, we've all learned that lesson one way or another.

Click to expand...

I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.

harshness said:

I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

Click to expand...

Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.

harshness said:

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.

Click to expand...

This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.

Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.

View: https://www.youtube.com/shorts/SIWG5-jHFC8?feature=share

dishstaller said:

Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.

Click to expand...

Agents need appropriate context to make what would be understood as the correct read in a situation like that, and that Gemini answer was a clear miss on that front.

That said, we've also seen Musk (and/or his team) put his thumb on the scale (or just release a very poor product) with his own deployed AI since:


In the end, it's all a tool. Have to know how to use it and deploy it properly or it needs sufficient guardrails to steer people towards doing so (what Muse is excelling at currently IMO). I'm routinely interacting with several agents a day operating various processes locally and in services I use, and there are numerous others silently spun up to perform actions or satisfy requests from my prompts.

Related to earlier discussion in the thread on leveraging local inference: this kind of analysis happening behind the scenes is something everyone will have built into Windows, IMO. Most people won't see all of this, just the results, unless they want to dig into how the fix was chosen. Stuff like this will be standard as agents get local system access baked in, and more of the inference itself moves on-device.

meStevo said:

Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.



This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.

Click to expand...

You invested in datacenters?

telstar_1 said:

You invested in datacenters?

Click to expand...

Though, I do have stocks in my portfolio that benefit from data centers.

Too stinking funny...how to fry the mind of AI robo calls


View: https://www.youtube.com/watch?v=lk3jCuITwcE

Nice setup. I bought a Klipsch sound bar years ago after my daughters blew up all the others....still using it...sound is awesome.

Bob Evans Sage.

navychop said:

Bob Evans Sage.

Click to expand...

I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.

reubenray said:

I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.

Click to expand...

Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

TRG said:

Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

View attachment 194848

Click to expand...

No Kroger's near me. I live in the heart of Walmart land. The only option besides Walmart is Harp's.

reubenray said:

I live in the heart of Walmart land.

Click to expand...

My deepest condolences.

TRG said:

My deepest condolences.

Click to expand...

Surprisingly I moved here from the Gulf Coast due to the heat. But it has been hotter here due to the heat domes than it did down there.

make homemade dog food to

slow_poke_pete said:

make homemade dog food to

Click to expand...

My wife cooks for the dog. Not me, just the dog.

I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.

naptime said:

I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.

Click to expand...

It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.

jsmit86 said:

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.

Click to expand...

Oh, you mean "soon"?

jsmit86 said:

It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.

Click to expand...

I guess they will be busy when lots of people start asking for rollbacks to H708 now that you mention that downgrades of software does exist because it will likely fix the OTA Single Tuner and the IR Remote problems in H710-H713.

Almighty1 said:

it will likely fix the OTA Single Tuner

Click to expand...

Almighty1 said:

it will likely fix the OTA Single Tuner

Click to expand...

Oh....you were serious

So after some heavy research, it looks like the issue I mentioned with the DISH 50.0/52.0/54.x remotes where on the 50.0/52.0 remotes, the dedicated TV Power button or on the 54.x remotes where it is using the TV button on the side followed by Power works correctly on a Hopper 3 which runs Linux but not on a Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 which are Android TV (ATV) has to do with the Android TV software itself. In all instances, the remotes had always sent out a dual RF and Infrared signal when the TV Power signal is sent from the remote. The Hopper 3 without the Plus would ignore the incoming RF power packet signal which is identified as a TV-specific toggle event, and does not trigger a system-wide standby state. The Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 as Android TV devices initially worked the same way as well up to sometime in 2025 as there was the legacy pass-through mode in the original software versions used since the Hopper Plus/Joey 4/Wireless Joey 4 launch, the receiver's underlying software essentially ignored the secondary RF payload that the 50.0/52.0/54.x remotes blasted out whenever the TV Power signal was sent. The Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 recognized it was a TV-specific command and discarded the RF packet, letting the standalone IR signal do its job on the tv.

When the software for the Hopper Plus, Joey 4 and Wireless Joey 4 were updated in 2025 and newer versions of the software for those Android TV (ATV) devices, it overhauled how the receiver handles remote commands to tighter integrate the Android TV environment which resulted in the software starting to treat any RF power toggle payload as a global command. As the newer software verion(s) no longer filters out the concurrent RF blast from the 50.0/52.0/54.0 remotes, the moment one sends a TV Power signal from the remote, the Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 catches that unintended RF payloadand interpets it as a command to drop the system into standby.

The fix is really simple since the Android TV (ATV) software for the Hopper Plus, Joey 4 and Wireless Joey 4 just needs to be programmed to drop or ignore the specific RF power packets associated with the TV Power signal sequence.

The problem could also be at the remotes firmware as the remote's firmware has an engineering defect. When you try to turn off the TV, the remote's internal code mistakenly triggers its RF transmitter alongside its IR transmitter. It should only be firing the IR light blast. Because it forces a simultaneous broadcast, the remote's firmware is the original source of the problem.

The Hopper Plus, Joey 4 and Wireless Joey firmware has a filtering defect. Good software design dictating peripheral inputs should include "error handling"—rules that tell the system what to do with messy or unintended commands.
• The legacy Hopper 3 firmware has proper error handling; it sees the remote's rogue RF packet and safely ignores it.
• The Android TV firmware in the Hopper Plu, Joey 4 and Wireless lacks this filtering logic. It blindly accepts the rogue RF packet and misinterprets it as a legitimate signal to force the entire system into standby.

If the remote didn't have a firmware bug, it wouldn't send the phantom RF signal. If the Android TV (ATV) device being the Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 didn't have a firmware bug, it would cleanly ignore the signal just like the Hopper 3 does.

brittanygarden and Rick Durham

I wonder if California is getting into the Winter formula.

Diesel is all over the place around here. Saw it yesterday from $5.37 to $6.17...not sure what the obsession was with ending in 7

$4.09 - $4.29, real gas $4.69...

harshness said:

I wonder if California is getting into the Winter formula.

Click to expand...

It turns out I was justified in my suspicion.

Gavin Newsom somehow authorized the temporary move of the distribution date of the Winter blend to September 28th.

harshness said:

It turns out I was justified in my suspicion.

Gavin Newsom somehow authorized the temporary move of the distribution date of the Winter blend to September 28th.

Click to expand...

Does that raise, or lower, the overall price? Our State Government has been doing everything it can to minimize the impact of the current situation and put a freeze on the State Taxes on fuel sales at the pump. That's why we're still under $4.00/gal. while across the border in Michigan it's much higher.

Foxbat said:

Does that raise, or lower, the overall price? Our State Government has been doing everything it can to minimize the impact of the current situation and put a freeze on the State Taxes on fuel sales at the pump. That's why we're still under $4.00/gal. while across the border in Michigan it's much higher.

Click to expand...

Winter blend is cheaper than Summer blend.

Chili Cheesebugers, Tater Tots.

I made shrimp parmesan with spaghetti and a salad.

venison lasagna

Smoked some salmon on the grill while enjoying some Blue Moon beer. Kinda cool tonight so I fired up the heaters. Here in FL, we fire up heaters once the temps get below 60 As for the salmon, I seared them first, then flipped them off to the side not over the coals and brushed on some lemon pepper marinade followed by some salmon seasoning. Threw some hickory chips on the coals and then closed the vents to about 10% airflow. Yum.

Light dinner tonight before fasting for blood-work tomorrow. Salad and a half turkey sandwich. Water.