Social Feed

D
Last reply · posted in DISH Network Support Forum
I hadn't noticed this being discussed, but with all the news about the 813 and including the ViP series and how DBS technology provides a number of tuners that can exceed 6 tuners, could the "AllVid" proposal from the FCC be a BAD thing for power users? The last I heard, the proposed specs for "AllVid" would have a maximum of 6 tuners per household. I wouldn't mind those more knowledgeable than I to chime in with some thoughts on if this could mean all DBS subscribers will have to limited to 6 tuners.

(Please no inane posts about how 6 tuners is plenty for you and how others need to get a life. This is a post regarding a serious consumer issue and is for those with situations or desires for more than 6 tuners or any others who wish to enhance the discussion on this issue, not to affirm your lack of a life by posting some puerile post.)

"AllVid" is the FCC's proposal to make MVPD's (cable sat, FiOS, IPTV, EVERYONE) OPEN to any set-top-box, so that consumers can have choice of set-top-boxes by purchasing them from any maker and it will work properly, unlike the Cable Card fiasco. It is proposed to be a gateway device using IP. The boxes are supposed to be able to provide ALL features including VOD or whatever. In other words, access to all content just as the cable or sat boxes. Some big companies have supported it (Google, TiVo). One more benefit of AllVid is that if one changes a provider, the consumer's box will also work using a competitor's service, such as changing from DirecTV to Dish, or to Cable or to FiOS or IPTV. So, no new investment of set-top-box hardware for the consumer.

So, how does this work for those who need or want more than 6 tuners? And how does this fit in with Dish 813 and DBS ability to deliver at least twice the number (perhaps DirecTV even more?)?
7 Replies · 1682 views
Stargazer
If a standard device could be used by all companies then that would really drop the cost of the hardware since it would be made more in bulk and perhaps even better functionality as well. It would save companies a lot of money as well by not having to swap out the equipment everytime someone is to change providers. The bad news would be support for a different manufacturer's equipment. Does this mean no more DVR and additional tuner fees by companies?
D
If a standard device could be used by all companies then that would really drop the cost of the hardware since it would be made more in bulk and perhaps even better functionality as well. It would save companies a lot of money as well by not having to swap out the equipment everytime someone is to change providers. The bad news would be support for a different manufacturer's equipment. Does this mean no more DVR and additional tuner fees by companies?

You made some good economic points I hadn't considered. In fact, companies like Dish might encourage those to go with a 3rd party so Dish doesn't have to pay for the RMA's. IN fact, Echostar could do well as a major AllVid compliant STB maker, no longer having to try and get (beg?) MSO's to adopt 922 or other Echostar equipment. I'm sure Motorola and Scientific Atlanta have worked hard to keep Echostar OUT of providing cable with STB's. AllVid would open up the market to Echostar on an even playing field.

I think the companies would be free to have their own fee structure, so it probably won't change a fee we now have. The FCC is only addressing the technical matters of requiring a porthole to the end user that would make it possible for ANY MVPD service to function on any maker's box. It would be like how one can buy any TV from any maker because there is a standard.

Now, this doesn't mean that there has to be standard in the delivery, meaning that any method can be used to get the content to the house, BUT the last leg would be mandated to be AllVid. In other words, the SAT signal upon reaching the home would have to be converted to the IP AllVid standard to allow for use of any maker's box.

The troubling aspect is that the current AllVid envisioned has a capacity of up to 6 tuners. Could a second AllVid porthole be technically possible to allow for more than 6 tuners? That's why I was hoping for more knowledgeable people than I could contribute. While nothing has been finalized, the FCC has embraced AllVid (mostly because of the embarrassing CableCard mess) and a massive number of big corporations support it. I haven't heard anything from satellite on this. Any contributions welcomed.
D
OK. I did some digging at the FCC and it seems DirecTV absolutely opposes, while Dish seems to have a qualified opposition, but clearly leans against it. I guess it is predictable that all the MVPD's are against it, while those who stand to profit from it, Best Buy (selling all those new boxes) along with the Consumer Electronics Association (no surprise there), Google, Tribune Media Services (the EPG content for all those new boxes), Intel (chips in all those new boxes) are all for it. The MVPD's, often the bad guys, did bring up some valid points of concern, especially Dish Network. Many of the comments from the MVPD's were within the last few months and even weeks.

Also, the FCC appears to have taken the concerns and altered, somewhat, AllVid proposed specs on HOW "one size fits all" is achieved. However, it may be that the rapid change in technology and how we receive our programming along with market demands may outpace any sort of AllVid proposal. We shall see.
Brussam
The con is that a "standard", especially a government standard, means the end of innovation.
Tampa8
There are many against this. This just screams vanilla boxes. I bet the cable companies are in favor of this, helps to level the playing field, downwards..... This is NEVER a good idea. Like having an OTA tuner that can be controlled just as the sat channels are? Say goodbye to that....
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Wasn't exactly sure where to post this. Just had a customer come in inquiring about internet. He has HughesNet and had heard good things about mine. He asked if we provided email addresses and it kinda caught me off guard. I said he should be able to keep whatever email he had been using....my sister in law is still using a BellSouth email addy and they haven't been around here for many years. He said he had gotten a letter from HughesNet stating that they had until Nov 16th to save, move, forward, whatever, their Hughesnet emails because they would lose them after that date.

I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.

Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.
1 Replies · 37 views
Foxbat
Doing a Google of the HughesNet Email notice, it seems that HughesNet has been trying to eliminate hosting emails since 2019. And with HughesNet filing Chapter 11 back in August, it would be a smart move to switch to a more stable Email provider. Even AT&T farmed out their Email to Yahoo! years ago.

SpaceX's Starlink and the Cellular 5G Home Internet solutions have pretty much relegated HughesNet and its high latency, low bandwidth Internet service to History. If Earth had shorter days, maybe a Geostationary Internet Solution might have stood a fighting chance…
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 0 views
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.

21 Replies · 160 views
Jimbo
Back on the Goliath Roller Coaster ... I'm interested to find more details as well ...
Like where on the track did this happen (somewhere I read that it was on the climb up the top), which is impossible ...

They really need to take that ride and add at the very least, seatbelts ...

The Park is opening back up on Friday, the ride will Not be opening ... personally, I would keep it closed until different type of restraints can be designed and installed (over the winter).

I find it hard to believe that this ride is even allowed to be running with the restraints that exist at the moment, there are other rides that use the same type and they have been shut down across the country.

You got to believe that every ride has at least 2 types of restraint systems in place.

I wonder what and when we will hear from the Manufacturer ... and whatever governing bodies control these ...

Just think, this is a Major Amusement Park .... I would not have any problem getting on the Roller Coasters I have rode ...

Imagine what these County Fairs and others like them, I would not be caught Dead on one of them ... they get put up and tore down every other week, where is the safety for those rides ... No Thank You.
  • Like
Reactions: dishstaller
dishstaller
Imagine what these County Fairs and others like them, I would not be caught Dead on one of them ... they get put up and tore down every other week, where is the safety for those rides ... No Thank You.
The first roller coaster I ever road was one of those. I was terrified but I was with my friends and didn't want to wuss out. While in line I kept looking at the guys running the ride.....few teeth, not that bright looking....I just KNEW my life was over.
  • Haha
Reactions: Jimbo
Jimbo
navychop
I would not be caught Dead on one of them

Yet IF you were on one, you might be caught dead.
dishstaller
Had no idea there were that many redundancies built into those restraints.
Jimbo
Had no idea there were that many redundancies built into those restraints.
It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.

Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...

NONE of the Coasters at CP use THAT particular system :)
I'm glad to see ...
TheRatPatrol
Last reply · posted in TV Shows
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2129 Replies · 214615 views
TheRatPatrol
Wait, Tony is the director now? Apologies, I stopped watching a while ago.
  • Wow
Reactions: Howard Simmons
Jimbo
Wait, Tony is the director now? Apologies, I stopped watching a while ago.
Was Gibbs still there when you quit watching ?
If so, A Lot has happened ....

It's been pretty good all along , once you get use to Gibbs being gone.
  • Like
Reactions: MikeD-C05
Jimbo

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
  • Like
Reactions: Howard Simmons
Howard Simmons
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Tony as the director.🙄
Jimbo
Tony as the director.🙄
Would you rather have LaRoche ???
H
Last reply · posted in FTA Receiver / Equipment Support
I just received 6 receiver 2 port mini Multiswitch and it work great, no external power need it, and you can connect 6 receiver instead of 4 on most Mini Multiswitches... If anyone is interested in where they can get one PM me....
IMG_1786.webp
1 Replies · 34 views
Titanium
Have you tested using external power? Over the years, have found unpowered polarity switching to be unreliable. Especially problematic when used with DiSEqC motors or switch stacking.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
I bought the fixed color version of these bulbs for my store several years ago...work great and no more replacing ballast. Finally had one go out and when I went back to Amazon I saw that now they come in selectable versions so no more guess work as to what color light would do best in a certain area. They are now double OR single ended...used to be strictly one way or the other. If any of you are looking at replacing the old style 4 or 8 ft bulbs, you might want to give these a try. The 8 footers are BRIGHT. I put 5 in my shooting/target shed and you can get a decent tan if you are in there long enough.

1 Replies · 20 views
Foxbat
When we re-lamped my in-Laws' house for sale last year, we were able to get all the Edison bulbs and a few fixtures with switch-selectable Color Temperature. We tried a few and settled on 3000°K as the best fit for the house. Matching the lighting in all the rooms made for an inviting experience. The Shop was the only place that we went with 4000°K for the LED 4' fixtures.

The house was sold within a month of going on the market, so we must have done something right.

The other advantage is if the new owners decide that they prefer a warmer light, they can unscrew the bulbs (I think it was close to 70 bulbs) and set them to the 2500K/2700K settings.

I'll have to check these out. Thanks!
Former member 209992
Last reply · posted in SatelliteGuys Support Center
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
520 Replies · 17797 views
  • Like
Reactions: charlesrshell
Scott Greczkowski
Just doing a big security update on the server, may slow down then again it may not. Just wanted to warn you guys. :D
Scott Greczkowski
Ok the update is complete. :)
Foxbat
Scott, I was having major issues getting connected around noon ET. Looks fine now. I captured a Safari session that was showing high CPU utilization in the Rendering of the page, like 90+%. I have a JSON file I created that I could share.
  • Like
Reactions: charlesrshell
Scott Greczkowski
Been using the site at that time and saw no issues. A quick look at the logs shows nothing strange.
Foxbat
Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.
  • Like
Reactions: charlesrshell