Ok apparently not. As soon as I try to program a command to that button the light goes off.
What I need the most is to be able to program the inputs of my AVR to the remote. I can program volume, on/off but thats it. I tried the learning remote again, but somethings not working. For example, I press down Aux for a few seconds and all lights up. With my AVR remote pointing towards the IR port on the side of the 722k remote, I press 1 on the keypad, as I want to assign that to switch to Video 1 on my AVR which is also #1 on my AVR remote. same for #1, #2, and #3, all which correspond to my inputs on the AVR.
But nothing happens. Theres a red light on my AVR that flashes whenever it receives a command. It appears when I press the buttons on the remote, but nothing happens. So commands being sent from the 722k remote seem to be talking to the AVR but nothing happens. Any ideas?
Also the whole "press recall then record for 3 seconds" does nothing. I press Aux button, press recall, then press record for 3 seconds. Nothing happens, the manual says the mode button is supposed to light up, but it doesnt.
What am I doing wrong here? I've already programmed my DVD recorder, and it works great. And to my surprise the remote also recognizes the input button for my LG TV allowing to switch inputs on the TV. All I gotta do is get switching working on the AVR and I'd be very very happy.
EDIT:
I think I know whats up. The tech programmed the remote for our AVR (onkyo hts894) before I got a chance to do it myself. The keypad buttons are assigned to something else (even though they do nothing). I was able to assign one of the buttons (# key) to switch to Video 1 on the AVR. I also figured out the recall/record thing. Press Mode button one, hit recall then hold down Record for a few seconds. However this no longer works. So I guess I cannot override pre-programmed buttons.
So is it possible to clear all codes for Aux mode? I'd like to manually teach the remote vol/power and mute buttons, then assign the input switches. This would be SO much easier if I could use the color buttons for switching. I read on another forum someone was able to set their 722k remote this way. Wonder how he did it.