Social Feed

W
Last reply · posted in Cable Television and Fiber Providers
Hi Everybody,
I just joined and this is my first post. I tried to look and search for the situation I have but didn't quite find the right thread, so I am posting this question.

I have had Dish TV for the last several years primarily for the International programming + American Programming (HD). My internet is through DSL (No telephone line).This month my HOA approved SureWest and they are running a very sweet deal where in I am getting basic cable, local and internet for a bundle price.

My home is pre-wired and I have a Dish HD DVR VIP722 for controlling two TV's (one in my Living Room) and other in my BR. My living room set up is running through my AV Receiver. I have got an extra HDTV which I am planning to put in my wife's hobby room in the basement.

I need to keep my Dish for International programming but American Programming and Internet I am switching to SureWest. SureWest will run a separate line for Internet since it is fiberoptics but my question is can I have Dish and Cable from Surewest run through the same cable and then at the end split it into their respective HD DVR/Receivers? International Channels are all NON HD.

SureWest said that they would probably have to charge me extra $$ for running a separate cable. Is there way to accomplish this using Diplexer?

If not, since my house is pre-wired and the cables from outside come to my basement in a distribution box, can the tech from SureWest run extra cables for American Programming in my Living Room and Basement (where I intend to have Dish) and for the rest of house make use of my existing connections?

So what I am planning to achieve will be somewhat like this:
Living Room and Basement : Dish TV for International Programming (Non HD Channels) + SureWest for American Channels (HD + Non HD Channels)
Rest of the House : SureWest
Internet: Separate FiberOptic line.

I will appreciate any help or guidance.

Thanks!
3 Replies · 2063 views
ProfStata
Wolowitz said:
Hi Everybody,
I just joined and this is my first post. I tried to look and search for the situation I have but didn't quite find the right thread, so I am posting this question.

I have had Dish TV for the last several years primarily for the International programming + American Programming (HD). My internet is through DSL (No telephone line).This month my HOA approved SureWest and they are running a very sweet deal where in I am getting basic cable, local and internet for a bundle price.

My home is pre-wired and I have a Dish HD DVR VIP722 for controlling two TV's (one in my Living Room) and other in my BR. My living room set up is running through my AV Receiver. I have got an extra HDTV which I am planning to put in my wife's hobby room in the basement.

I need to keep my Dish for International programming but American Programming and Internet I am switching to SureWest. SureWest will run a separate line for Internet since it is fiberoptics but my question is can I have Dish and Cable from Surewest run through the same cable and then at the end split it into their respective HD DVR/Receivers? International Channels are all NON HD.

SureWest said that they would probably have to charge me extra $$ for running a separate cable. Is there way to accomplish this using Diplexer?

If not, since my house is pre-wired and the cables from outside come to my basement in a distribution box, can the tech from SureWest run extra cables for American Programming in my Living Room and Basement (where I intend to have Dish) and for the rest of house make use of my existing connections?

So what I am planning to achieve will be somewhat like this:
Living Room and Basement : Dish TV for International Programming (Non HD Channels) + SureWest for American Channels (HD + Non HD Channels)
Rest of the House : SureWest
Internet: Separate FiberOptic line.

I will appreciate any help or guidance.

Thanks!

No. You need separate lines.
M
Are you sure he can't use 2 diplexers to combine the Dish and cable? Last I checked they run on different frequencies unless digital cable is up in the 950-1450Mhz area
J
Cable runs on similar frequencies as satellite so diplexing both could cause problems. However, I have seen it work. The problem you will have will be with tv2. It will be fuzzy.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68658 Replies · 2680205 views
  • Like
Reactions: c-spand
dishstaller
I Wanna Talk About Me - Toby Keith
  • Like
Reactions: RaiderPower
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
  • Like
Reactions: RaiderPower
gms49ers
It's Easy - Boston
RaiderPower
Take It Easy On Me - Little River Band
  • Like
Reactions: dishstaller
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 45 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 283 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 50 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 55 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.