Replying to DishTech.Mark again,
Seems the 2 NEW receivers had not been moved off the default 4 hour auto shutdown as I thought I did. That said:
I did not change it on the receiver I took off the internet. Since I removed it from the internet I have had it do 3 12 hour recordings and none were broken up, meaning it did not reboot. I will be testing it more though.
THe other unit I left on the net and it was rebooting. I then turned off the timer to auto-shut off (4 hour to off totally) and that was yesterday morning. Since then I have not seen it reboot at all, but then again it will not be recording a 12 hour block till today so I woun't have a better clue till tonight.
Still, why the internet connect would cause it on one and the auto off feature on the other would cause the reboots... I will let you all know more as I test more.
Please PM your account info to me, so I can submit the report.
David
David,
I read your posts through three times just to make sure I had not overlooked an important detail.
You said:
You had 2 VIP 722 receivers
- 1 connected via broadband only
- 1 connected via broadband and land line.
The inactivity times were causing reboots every 4 hours. You have reset these, and tried different combinations.
You have a fiber drop from your broadband 2200' to the house, back to a router, which has been replaced once
In a combination of 5 visits:
Both VIP 722 receivers have been replaced, outside cabling/LNBFs was replaced.
You had a UPS connected in the loop
An electrician has checked your power
One of the receivers is connected to the internet, via wireless adapter.
A 3rd SD receiver is not having issues.
The above is a brief synopsis of main details.
What I noticed is that you disconnected the broadband. If I read this correctly, you did this on the unit with the wireless adapter. That would leave the phone line and broadband hooked up to the other one? If I understood you correctly, the receiver connected tot he router (hardwired Ethernet cable ) is also connected via phone line. the other is connected via wireless broadband adapter.
There may be a buffer or router setting that needs to be tweaked, but I am not sure, based on your ISP, if it could be a timer or packet size issue. That might be the cause of the issue on the receiver connected to the wireless adapter. As for the other, have you tried disconnecting the phone line, and leaving the broadband connected? I have never heard of this affecting two receivers, but have seen the updates have issues with both phone and Ethernet connected to the receiver. If they both operate normally with only the broadband connected, then the phone line connection
This was the only thing I saw that had not been tried.
I have sent a report to our engineering department for you. This situation is an unusual one, and you have done some extensive troubleshooting already. Let me know if unplugging the phone connection works for you.