Social Feed

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Jun 3, 2005 · posted in DISH Network Support Forum

The 942 is HERE!

I couldn't wait to get home today, I was hoping to leave work by 3 however that did not happen, I left work at 5:30.

When I got home my wife had setup my 942 box on the dining room table to wait for me.

I got in grabed my Digital Camera and began taking pictures of the new longly awaited Dish Network 942 receiver!

I opened the box and snapped photos along the way. I was happy to see they had a new channel lineup card which actually listed the HD channels. (The 921 came with a card as well but no HD channels were mentioned)

As I ate dinner I looked through the impressive 942 Users Manual, eash time Dish Network comes out with a new receiver their manuals get better and better each time. While quickly going through the manual I noticed something I do not recall seeing anyplace else, and that is that the 942 will be able to do Video On Demand with a software update. I was excited to see this!

I started downloading my photos I took when I noticed that the HDMI port had a sticker over the letters HDMI instead it said HDTV Digital Output on the Sticker. I peeled off the label and the letters HDMI were there under it.

I have not hooked up the unit but I will do so after I send you guys (our pub members) our first photos of the 942. This is not a beta unit like you may have seen before this is an actual shipping unit!

Here are some photos to get us started.

270 Replies · 56750 views

Load Replies (270) Reply Legacy View

bookwalk

May 19, 2005

On some of the heating issues--have they remembered to remove the almost invisible plastic shrink wrap that is on at least the front of the unit--check to see if it's on other sides also.

MR CORVETTE

May 20, 2005

klen said:
I just got installed this morning. After about 2 hours of watching, my first impressions are that HD is about the same as voom, but SD is much better than Voom. Have fun with it.

-k

I got mine yesterday and I think HD is better with 942 than VOOM and Dish 811, SD also looks better

gutter

May 20, 2005

I am thinking that the 942 makes as big difference in PQ on both HD and SD. it really rocks. I din't know my DLP was that capable. Sharp crisp and the contrast is fantastic.

Tech27

Jun 3, 2005

Well I finally got to watch some programming on my 942 last night. The original install was 5/27 but there was a problem with one of the tuners. So I ordered a replacement and it was waiting for me when I got home yesterday evening. Hooked it up, activated and quickly became amazed at the PQ on the HD channels. I'm an installer and have seen the 811 PQ plenty of times. I thought it was pretty good, but I do believe that the 942 has it beat by a long shot. Watched some underwater stuff on Discovery HD last night and the colors were amazing. I'm running through a 51" sony vvega moniter and it has incredible vibrance. I can definately tell what has been filmed with HD equipment and what has just been converted but even the converted stuff looks pretty darn good. Also watched a little Conan last night. He looks almost frightening!! All in all I'm very pleased with the 942 thus far! Thanks for a great product E*. Hope the mpeg4 version will live up to this one!!

Walter L.

Jun 3, 2005

Has somebody experience this problem with the 942?

In dual-mode when recording a show on TV2, if you start watching it before it finishes recording, sometimes after a pause and/or FF sequence (not sure yet) it starts "believing" that it is LIVE and doesn't let you do FF anymore. After this happens, even if you re-start playing, it still believes that the show is LIVE and doesn't let you do FF. The only way to do FF is stopping recording.

View all replies (270)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply 1 minute ago · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68703 Replies · 2682703 views

Load Replies (68703) Reply Legacy View

Reactions: c-spand

dishstaller

Yesterday at 11:53 PM

In The Wee Small Hours of the Morning - Carly Simon

long_time_Dish

Today at 12:29 AM

Sometime In The Morning - The Monkees

Reactions: dishstaller and ClarkGable

hwkn

Today at 2:39 AM

Touch Me IN THE MORNING-Diana Ross

Reactions: ClarkGable

ClarkGable

Today at 5:48 AM

Touch Me - The Doors

Reactions: gms49ers

dishstaller

1 minute ago

The First Time Ever I Saw Your Face - Roberta Flack

View all replies (68703)

osu1991

Pub Member / Supporter

Last reply 3 minutes ago · posted in The Chit Chat Club

USA Healthcare Costs are Ridiculous

Pissed off at the crappy healthcare costs

My health Insurance renewal for 2027 just came in. Going from $827 a month to $1,187 a month. Deductible going up a $1k to $9,350. Max out of pocket also going up $1k to $11,000. Doctor co-pay of $40. Urgent Care co-pay $50. ER 50% coinsurance after deductible. That's all in network. Out of network is double, should it be needed.

Have to think about this. I'm really tempted to just go without now. I only go to the doctor once or twice a year. I pay out of pocket for Tirzepitide and can do without the Rosuvastatin (crestor) now. Really tired of spending over $10k a year and getting nothing out of it.

After years with Blue Cross I switched last year to Ambetter as my Blue Cross premium was going from $1200 to $1800 for a Silver plan and the Bronze plan was still going to be $1300 at BCBS. Ambetter was $827 for the same coverage with a Bronze plan. Didn't think it would jump this much so soon.

I'm guessing a Silver plan is probably over $2,000 a month for 2027.

36 Replies · 487 views

Load Replies (36) Reply Legacy View

Reactions: AZ.

b4pjoe

Yesterday at 10:12 PM

My wife and I use the same Medicare Advantage plan from United Healthcare. (Yes I have heard the horror stories about Medicare Advantage plans but we have used it for the last 5 years). We are both pretty healthy so it works for us. It costs $0.00 per month for both of us and it pays part of our Medicare part B premium. Next year it will be paying $170 per month of the $220 monthly part B premium for both of us. We also each get $90 per quarter to use on OTC products. $0.00 copay for Dr. visits and $55 copay for specialists. Includes dental and hearing coverage. Never have had an issue with it although I don't really use mine other than for the dental, Part B payments and the OTC benefit as I am a veteran and use the VA for all of my medical needs. I just had a kidney that had a cancer mass removed last month and they allowed me to use a non VA surgeon at a non VA hospital through the VA Community Care program. For all of the doctors visits, exams, tests, surgery, hospital stay, meds etc…was around $60,000 and the the VA paid for it entirely. I did have to pay $16 for the Oxycodone pain pills when I left the hospital that I got from my local CVS instead of waiting for a week for the VA to ship them to me from the VA pharmacy.

Reactions: navychop

dishstaller

Yesterday at 11:46 PM

b4pjoe said:
$0.00 copay for Dr. visits

And THAT is one of the big issues causing a lot of the problems. If the minimum copay for Dr. visits was at least $100 then a LOT of folks would opt out of those visits. If it cost the individual nothing then why should they care. All of my older family members are constantly going to doctor visits.....to them it is an adventure.....an outing that allows them a reason to go out to eat at a restaurant. IF they had to pay one cent out of their own pockets a lot of that crap would stop asap.

Sorry...rant off.

Reactions: reubenray

meStevo

Yesterday at 11:57 PM

dishstaller said:
And THAT is one of the big issues causing a lot of the problems. If the minimum copay for Dr. visits was at least $100 then a LOT of folks would opt out of those visits. If it cost the individual nothing then why should they care. All of my older family members are constantly going to doctor visits.....to them it is an adventure.....an outing that allows them a reason to go out to eat at a restaurant. IF they had to pay one cent out of their own pockets a lot of that crap would stop asap.

Sorry...rant off.

You're not wrong that some people treat free visits like a social outing. But it has to be a balance. Put a $100 barrier on a doctor visit and people don't just skip the pointless ones, they skip the important ones too. Then the stuff that would've been a cheap catch at a checkup shows up later in the ER, sicker and way more expensive. The shift we need is from sick care to actual healthcare.

Reactions: dishstaller, osu1991, b4pjoe and 2 others

b4pjoe

Today at 5:45 AM

dishstaller said:
And THAT is one of the big issues causing a lot of the problems. If the minimum copay for Dr. visits was at least $100 then a LOT of folks would opt out of those visits.

And I wonder how many people that can't afford $100 die instead of going to the doctor and getting something taken care of before it gets much worse and more expensive?

Reactions: osu1991

reubenray

Today at 5:54 AM

dishstaller said:
And THAT is one of the big issues causing a lot of the problems. If the minimum copay for Dr. visits was at least $100 then a LOT of folks would opt out of those visits. If it cost the individual nothing then why should they care. All of my older family members are constantly going to doctor visits.....to them it is an adventure.....an outing that allows them a reason to go out to eat at a restaurant. IF they had to pay one cent out of their own pockets a lot of that crap would stop asap.

Sorry...rant off.

My Brother and his wife are like this. They go to the Doctor for everything. They have a great insurance plan where they pay nothing, plus they use the excuse to go out to eat. I better be sick for multiple days before I go to a Doctor.

dishstaller

3 minutes ago

meStevo said:
But it has to be a balance.

Unfortunately, humans tend to suck at finding a balance in just about anything.

reubenray said:
They go to the Doctor for everything.

I see a LOT of that. And yes...they DO go to the doctor for EVERYTHING.

I was sick a couple months ago, either light flu or cold. First thing my Mom asked me when I told her was "You need to go to the doctor". I said WHY......I know what to do....it'll last a few days and I'll be fine.

The biggest problem with paying nothing out of pocket is that people quickly don't want to pay a penny for anything. Had an older customer in the store the other day. He mentioned that he had just come from CVS and I guess he wanted to rant. He said he went to pick up his prescription and "they changed my plan and wanted $4, they used to be free...I told them to stick them somewhere and walked out". BTW, he was in the store buying a new remote. So he HAD money for a remote but not $4 for this medicine that somebody somewhere thought he needed.

View all replies (36)

Ham Radio 2.0

9 minutes ago · posted in Ham Radio 2.0

Selling Radios Online? The FCC Changed the Rules

Time for another AWESOME video from Ham Radio 2.0!

View: https://www.youtube.com/watch?v=nHFHj6qZvWw

Direct YouTube Link - Selling Radios Online? The FCC Changed the Rules
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook

0 Replies · 0 views

Replies Reply Legacy View

Ray_Clum

Last reply 42 minutes ago · posted in DISH Network Support Forum

Wireless Joey4 (Android TV)

I had an old Wireless Joey replaced by a Wireless Joey 4 (Android TV) - still have a Hopper 3 without the Hopper Plus. What do I have to do to get the EPG to show channel logos instead of "Dish"? This is annoying as hell and it's been this way for over a month…

3 Replies · 61 views

Load Replies (3) Reply Legacy View

bnewt

Yesterday at 8:13 PM

That kind of crap annoys me to no end.
That is one reason I haven't switched to h3and the same wireless joey 4
Hope you get it resolved.

Reactions: charlesrshell

KAB

Today at 7:27 AM

Just so you know, my WJ4 (with no Hopper+) shows all the logos. I can't think of why yours isn't. I'll do some digging in the settings.

Reactions: charlesrshell

Scott Greczkowski

42 minutes ago

They "should" appear after a few days. If not reboot the hopper and joey. Sometimes it needs a kick.

Reactions: charlesrshell

MorCowbell

Last reply Today at 7:49 AM · posted in DISH Network Support Forum

Saved OTA list on Dish can't be appended

I have Dish with Hopper3. I choose to get local channels OTA and had a "guide list" established at my previous home. Having moved a few miles away, I wanted to update the list by appending a couple new stations via a rescan. As many would know, some stations come in with the UHF/VHF antenna aimed in one direction, while others come in better with a different direction.

Unfortunately, when a scan is done (bringing in 25-30 stations for that particular antenna aim), the dialog screen does not present the established guide list; it presents an empty field to the right that the scanned stations may be selected one by one and added to the empty guide. But because of antenna aim, some stations originally saved are missing, and would have to be retrieved with a different antenna aim. But as I explain, if a 2nd scan is done with a different antenna aim, the stations saved from the first scan are lost.

It troubles me that Dish didn't develop software that would allow a user to simply append only 1 or 2 channels to the established list.

Any thought on this? Has anyone experienced this or heard of this from others?

2 Replies · 89 views

Load Replies (2) Reply Legacy View

dishstaller

Yesterday at 9:59 PM

I hear complaints from customers each and every day. I chose not to install OTAs with a doggle for a reason.

BTW, I like your user name

View: https://www.youtube.com/shorts/MXNU6pQFkok

Reactions: charlesrshell

rvvaquero

Today at 7:49 AM

MorCowbell said:
It troubles me that Dish didn't develop software that would allow a user to simply append only 1 or 2 channels to the established list.

So, you want the ability to, for example, scan while your antenna is pointed to the east and save those channels to your list. Then, you want to scan again with the antenna pointed to the west, and add some of those channels to the list also while retaining the original channels you added from the east?

How would that work? If you move the antenna and some of your channels are no longer are accessible, there's no point in having them on the list. Unless, you want to re-point the antenna each time you switched from an east channel to a west channel and vice versa.

I suppose you could have one of those remote controlled antenna mast like we had back in the 60's. In that case, I can see your point. I think DISH has just designed the system to fit what the vast majority of users actually have. I'm guessing your situation is a pretty narrow use case scenario. I'm just really happy to be able to have my locals without having to pay the $17 month for them.

I just wish DISH would fix the remote control issue that the last few software downloads screwed up. I use the 54 remote and my Hopper is jumping around from off to on, from live to recording.......................like a Kangaroo.

Reactions: charlesrshell

TFLEV

Today at 7:02 AM · posted in TFLEV

The New Toyota C-HR Is NOTHING Like the Old One..Especially In One Way!

Time for another AWESOME video from TFL Electric Vehicles!

View: https://www.youtube.com/watch?v=qm0MPWaU9Es

Direct YouTube Link - The New Toyota C-HR Is NOTHING Like the Old One..Especially In One Way!

0 Replies · 8 views

Replies Reply Legacy View

reubenray

Last reply Today at 3:58 AM · posted in Computers and Gadgets

New Laptop?

After having continuing trouble with my eight+ year old Dell Inspiron laptop I am looking to hopefully catch a good deal on new one. My options to buy is Costco and Sam's Club. It seems like a lot of new laptops are 2 in 1 which I do not need. I use the laptop to mainly surf the web and keep up with my finances, money and bills. I would like to have at least a 15" screen and having a touchscreen is a plus. The keyboard would need to lighted also. I don't game any. It would have to be Windows instead of and not Mac. The brands I see the most are Asus, Dell and HP. My two last laptops has been Dell's. Of these brands are there any standouts over the other brands. My budget (hopefully) is $600+-. Also while researching I noticed that do not have ethernet ports.

9 Replies · 170 views

Load Replies (9) Reply Legacy View

EarDemon

Yesterday at 10:46 AM

Why not do a CTO directly through the manufacture? Get exactly what you want. Plus It's quite common to find 10%% (or higher) discount codes for Dell and HP.

Backlit keyboards are pretty much standard, and in the constant effort to try to make devices and thin and dainty as possible ethernet ports are becoming rarer, if not a normal ethernet port, you may be able to find a laptop with drop-jaw style one.

Reactions: Foxbat

TRG

Yesterday at 10:59 AM

This meets your 15" touchscreen requirement and budget when marked down.

https://www.bestbuy.com/product/dell-15-6-2k-touchscreen-laptop-intel-13th-generation-core-i7-1355u-2023-16gb-memory-512-gb-storage-carbon-black/J3K4L6QW5C

Reactions: reubenray

arlo

Yesterday at 12:16 PM

Can't really help with an exact set of suggestions. I can say that if you have a set budget. And $600 these days wont get you much. One thing I can say is check out Dell Refurbished.
I've suggested and even configured, ordered a few for friends who were a bit iffy in deciding what they needed and wanted.
Refurbished doesn't mean that they came back defective and were repaired. Companies and organizations who order quantities of the same computers often cancel or modify their requirements.
Dell builds usually on demand. Their direct refurbished line will be brand new, unused. Perhaps not exactly the "today" specifications of the latest-greatest. And you can get a nice pc for quite a bit less with full warranty.
Just a suggestion.
"I use the laptop to mainly surf the web and keep up with my finances, money and bills. I would like to have at least a 15" screen and having a touchscreen is a plus".

As far as Asus, HP goes. And others you may consider. I'd think $600 (new) would get you a laptop. A quality, long lasting one? Not so sure. Now. If you could get a $1000 lappy for $600. Good deal, don't you think?
Surf the web doesn't need a killer Nvidia graphics chip. Nor a pinnacle, top of the line Intel, AMD processor.
12-16 gigs of memory will get you by just fine.
I'm personally an Asus fan. Brands aside. The one thing is the batteries. We discussed that here someplace else.
I repair these critters. Batteries. Cheap laptops have cheap batteries. Asus suggests that you don't keep the charger plugged in all of the time to make them last. Like you see on phones where 85% vs full charge is suggested to preserve battery life.

Reactions: Foxbat and reubenray

harshness

Yesterday at 2:16 PM

EarDemon said:
Why not do a CTO directly through the manufacture?

Because there are fewer economies of scale with custom products. Savings come from giant contracts with major retailers.

RAM and GPUs make buying a computer now financial suicide. In 2023, I bought two 16GB RAM modules for my lone Windows machine. The cost was under $100. Now that equivalent RAM goes for $260.

One can opt for an on-CPU GPU, but you can't opt out of RAM. While Microsoft goes on and on about Windows 11 eventually being happy with 8GB of RAM, we know how that always ends.

Foxbat

Yesterday at 9:56 PM

GB is the new MB (remember when Windows used to be happy with 8 MB of RAM?)

I had great experiences with Dell's Refurbished systems in the past. I ended up getting Business desktops instead of the Home PCs since they didn't come loaded with bloatware and the one Desktop I got for Mrs. Foxbat even had a license for MS Office Professional included.

arlo

Today at 3:58 AM

arlo said:
Can't really help with an exact set of suggestions. I can say that if you have a set budget. And $600 these days wont get you much. One thing I can say is check out Dell Refurbished.
I've suggested and even configured, ordered a few for friends who were a bit iffy in deciding what they needed and wanted.
Refurbished doesn't mean that they came back defective and were repaired. Companies and organizations who order quantities of the same computers often cancel or modify their requirements.
Dell builds usually on demand. Their direct refurbished line will be brand new, unused. Perhaps not exactly the "today" specifications of the latest-greatest. And you can get a nice pc for quite a bit less with full warranty.
Just a suggestion.
"I use the laptop to mainly surf the web and keep up with my finances, money and bills. I would like to have at least a 15" screen and having a touchscreen is a plus".

As far as Asus, HP goes. And others you may consider. I'd think $600 (new) would get you a laptop. A quality, long lasting one? Not so sure. Now. If you could get a $1000 lappy for $600. Good deal, don't you think?
Surf the web doesn't need a killer Nvidia graphics chip. Nor a pinnacle, top of the line Intel, AMD processor.
12-16 gigs of memory will get you by just fine.
I'm personally an Asus fan. Brands aside. The one thing is the batteries. We discussed that here someplace else.
I repair these critters. Batteries. Cheap laptops have cheap batteries. Asus suggests that you don't keep the charger plugged in all of the time to make them last. Like you see on phones where 85% vs full charge is suggested to preserve battery life.

Just an edit. I did look on Dell's refurb site. To me I didn't really see anything approaching the six-hundred dollar range that I'd even consider owning. That's me though. Marginally in the $700 range.
Upwards of $1000, sure. Me? I'd save up a little more. I think their warranty is 100 days. Not that you'll need it. Square Trade is a viable option too.
The other guys replies after my first post here are viable. All I can say is that my friends and folks who chose refurbished over new have been entirely happy.

Just beware of cheap. It might just bite you. We do have tariffs now since when you bought your lappy 8 years ago.

Harshness' comment of on-cpu gpu. Intel Integrated Graphics is usually accompanied with and Nvidia gpu also.
Low power drain, good graphics and when needed, the Nvidia kicks in.

2 in 1 goes along with touch screen. Fold the display over and use it as a tablet. They go hand in hand. The keyboard shuts off. Normally open, the touch screen works as is should. I never use the touch screen when opened normally on mine. Kind of clumsy. In tablet configuration, does as it should.

View all replies (9)

brittanygarden

Staff member Pub Member / Supporter

Last reply Today at 1:08 AM · posted in DISH Network Support Forum

Are you experiencing an issue with your 3rd party remote since the newest Hopper update?

Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.

If you've already reported this to me, please repost it here so I can track all instances in one thread.

Thanks!
Brittany

26 Replies · 1136 views

Load Replies (26) Reply Legacy View

Reactions: That American Girl, Foxbat, RTCDude and 5 others

bookworm370

Oct 12, 2026

I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!

Reactions: david_jr, navychop, long_time_Dish and 4 others

GRB1959

Oct 12, 2026

bookworm370 said:
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!

Excellent suggestion.

Reactions: bookworm370, long_time_Dish, Almighty1 and 1 other person

bookworm370

Oct 17, 2026

GRB1959 said:
Excellent suggestion.

Yea, I've only been a CIO for the last 30 years!

Trust me, when something important breaks, they get to own it!

Reactions: Almighty1 and charlesrshell

Astroman3427

Oct 17, 2026

Loaded H713 software on my Hopper 3 last week. Have not seen any change in the IR/RF remote issues with my Harmony 700.
Has Dish acknowledged this is a problem and are they committed to fixing it?
I'd be happy to roll back to last July.

Reactions: long_time_Dish, GRB1959 and charlesrshell

long_time_Dish

Oct 18, 2026

Astroman3427 said:
Loaded H713 software on my Hopper 3 last week. Have not seen any change in the IR/RF remote issues with my Harmony 700.
Has Dish acknowledged this is a problem and are they committed to fixing it?
I'd be happy to roll back to last July. <-----|

Absolutely!!!---------------------------------------------|

Reactions: charlesrshell

reubenray

Oct 18, 2026

Astroman3427 said:
Loaded H713 software on my Hopper 3 last week. Have not seen any change in the IR/RF remote issues with my Harmony 700.
Has Dish acknowledged this is a problem and are they committed to fixing it?
I'd be happy to roll back to last July.

I got 713 a few days ago and nothing has changed concerning the IR/RF remote issues.

Reactions: long_time_Dish and charlesrshell

long_time_Dish

Today at 1:08 AM

My Hopper 3 updated itself to H713 last week and the IR issue is worse now. On H711, I could be on an SD channel for several hours and the IR side of my H3 would still be responsive without my having to tap the View button on my Pronto Pro every 15 minutes. Now, if I stay even on an SD channel without tapping the View button at least once an hour, it becomes unresponsive to my Pronto Pro without tapping the View button at least 5-20 times, just like on the HD and 4K channels. So, H713 actually made the issue worse.

brittanygarden

Reactions: charlesrshell

View all replies (26)

techristian

Yesterday at 10:58 PM · posted in FTA Receiver / Equipment Support

AMIKO Anyone watching IPTV on Amiko 4k s52 UHD ?

Anyone watching IPTV on Amiko 4k s52 UHD ?

I put a bunch of *.m3u files in the root of my USB KEY but Amiko won't try to play them?

No INSTRUCTIONS for this.

Dan

0 Replies · 15 views

Replies Reply Legacy View

dishstaller

Pub Member / Supporter Lifetime Supporter

Yesterday at 9:39 PM · posted in The Chit Chat Club

Don't mess with Mama's baby....

Dang female lions don't mess around when it comes to their kiddos....aka whelps.

View: https://www.youtube.com/shorts/Vvefv5xW77s?feature=share

0 Replies · 46 views

Replies Reply Legacy View

Reactions: NYDutch

Top

Back

Search

Search

Social Feed

The 942 is HERE!

Song Name Game Part 3!

USA Healthcare Costs are Ridiculous

Selling Radios Online? The FCC Changed the Rules

Wireless Joey4 (Android TV)

Saved OTA list on Dish can't be appended

The New Toyota C-HR Is NOTHING Like the Old One..Especially In One Way!

New Laptop?

Are you experiencing an issue with your 3rd party remote since the newest Hopper update?

AMIKO Anyone watching IPTV on Amiko 4k s52 UHD ?

Don't mess with Mama's baby....