[h=3]
VIP 722 and Local OTA Digital Channels[/h]

by
fharris770 » Mon Nov 05, 2012 10:42 am
I just added an OTA antenna outside. When directly attached to my HD TV it finds multiple channels. All four network affiliates as well as about 8 others. The signal strength of the local varies from about 70% to 98%. All display and look great on the TV. When I attach the antenna to my Dish receiver and do a search it does not find any of the channels. The receiver is old so I don't have the complete manual, but I did notice it seems to page through just the 2 digit channels from 02 through 69.
Anybody out there who can give me an idea, or is the tuner not capable of tuning the 02.1, 05.1, 11.1 etc???
fharris770 Posts: 2
Joined: Mon Nov 05, 2012 10:33 am
Top
[h=3]
Re: VIP 722 and Local OTA Digital Channels[/h]

by
pjw1967 » Mon Nov 05, 2012 1:56 pm
Jumping in before our hosts, but I have a 722 non-k with the built in OTA module. The receiver is at least 4 years old if not older. The 722 picks up most of the OTA channels. I use a splitter to feed the TV directly and the line up is about the same. When you hook it up directly to the TV, does it pick up the secondary channnels like 8.2, 8.3 etc?
pjw1967 Posts: 39
Joined: Wed Jun 06, 2012 6:02 pm
Top
[h=3]
Re: VIP 722 and Local OTA Digital Channels[/h]

by
fharris770 » Mon Nov 05, 2012 2:52 pm
I have similar setup. The OTA antenna has a power base that allows you to move the antenna as well as boosts the signal and it has two outputs. One goes directly to the TV the other directly to the ANT port on the back of my 722. I assume I also have the module referenced as there is the scan function in the menu options.
Yes, the TV direct scan found multiple channels. 8.1, 8.2 and 8.3 were all local PBS OTA channels. 17.1 is the TBS feed, etc. All had very good signal strength. The 722 just did not find any of them.
fharris770 Posts: 2
Joined: Mon Nov 05, 2012 10:33 am
Top
[h=3]
Re: VIP 722 and Local OTA Digital Channels[/h]

by
Raymond G. » Mon Nov 05, 2012 4:41 pm
DISH equipment will not detect the OTA sub channels. If you would like to be able to access the OTA sub channels you will need to connect your OTA antenna directly to the TV.
Raymond Gonzales
Social Media Representative
DISH
Sunday-Thursday
2:45pm-11:15pm
Above posted from DISH NETWORK forum last November. Not really sure exactly what I did last November, but really doesn't matter now. I am ordering Hopper, etc. But according to the tech from that forum the OTA in my VIP722 will not turn subs. I seem to remember that after a scan some of the found locals appeared in my guide, but displayed in YELLOW and my 722 (not a 722K) would not tune them.