Social Feed
Our setup: 4 HR24-100 (Living, Kids', and our bedroom), 1 HR24-500 (home office), Lines running to/from LNB, square SWM splitter, and what I believe was the power inverter...green, 1 input, and 4 outputs. PI is with the Living Room DVR...Cable run from dish to wall is 20' and then another 5' inside, DECA is with the home office DVR. Everything had worked great for 18 months.
I'm hoping someone knows because it's driving me crazy and my wife just wants me to "move" back and have a tech sent out. Background...we have the Protection plan and recently had to "move" back to our install address after a hard drive failure in an hr24-100. I was sent a -500 model. When activating it I had them "move" me back. On Friday we had the power flicker off for an hour and when it came back on our whole setup was a mess. Both of my son's DVRs work without any issues. Our bedroom DVR pixelates and at times comes up with the 775. Our Living room goes back and forth between working and not working...it seems tied to whether or not the -500 is plugged in. When it is, the Living room works and populates in the WH status/Recordings List. I have tightened every cable inside and outside, changed out different cables to the non-working DVR, and run the diagnostics which gave me (I believe) a 7501 code in each box of the Satnat/SWM test. Is the -500 itself the issue? We have tried multiple times unplugging all boxes, unplugging and disconnecting the PI for 90 seconds after the green light completely dims, and then connecting the cable from the wall to the PI before plugging it in. This past attempt I even power cycled the DECA. At that point we have gone box by box. The living room went straight to 775, the bedrooms had no issues, but the -500 in the office is still not working. Signal strengths are 0s across the board...even if I bypass the DECA splitter and go direct from wall to box. I have not confirmed via TV that the living room DVR is working this morning but it was before and the recorded shows are populating in Directv2PC and in the playlists. The only thing I haven't tried is swapping the -500 with a -100 but I'm not sure what good that would do.
I was told last Friday that the Protection Plan people can use a shipping address different than the installation address. If it's the box, I'll just get on the phone and politely demand they either send a -100 or -200 OR send a brand new box istead of this refurbished junk. Conversely, even though I don't think it's the issue based on the PI (since every other box works), could I just unhook the PI, take it to a dealer, and ask them if they can test the voltage?
Any suggestions for things I haven't tried yet would be greatly appreciated.
I'm hoping someone knows because it's driving me crazy and my wife just wants me to "move" back and have a tech sent out. Background...we have the Protection plan and recently had to "move" back to our install address after a hard drive failure in an hr24-100. I was sent a -500 model. When activating it I had them "move" me back. On Friday we had the power flicker off for an hour and when it came back on our whole setup was a mess. Both of my son's DVRs work without any issues. Our bedroom DVR pixelates and at times comes up with the 775. Our Living room goes back and forth between working and not working...it seems tied to whether or not the -500 is plugged in. When it is, the Living room works and populates in the WH status/Recordings List. I have tightened every cable inside and outside, changed out different cables to the non-working DVR, and run the diagnostics which gave me (I believe) a 7501 code in each box of the Satnat/SWM test. Is the -500 itself the issue? We have tried multiple times unplugging all boxes, unplugging and disconnecting the PI for 90 seconds after the green light completely dims, and then connecting the cable from the wall to the PI before plugging it in. This past attempt I even power cycled the DECA. At that point we have gone box by box. The living room went straight to 775, the bedrooms had no issues, but the -500 in the office is still not working. Signal strengths are 0s across the board...even if I bypass the DECA splitter and go direct from wall to box. I have not confirmed via TV that the living room DVR is working this morning but it was before and the recorded shows are populating in Directv2PC and in the playlists. The only thing I haven't tried is swapping the -500 with a -100 but I'm not sure what good that would do.
I was told last Friday that the Protection Plan people can use a shipping address different than the installation address. If it's the box, I'll just get on the phone and politely demand they either send a -100 or -200 OR send a brand new box istead of this refurbished junk. Conversely, even though I don't think it's the issue based on the PI (since every other box works), could I just unhook the PI, take it to a dealer, and ask them if they can test the voltage?
Any suggestions for things I haven't tried yet would be greatly appreciated.
6 Replies
·
1995 views
M
Here's a look at the setup outside:
Sorry about the quality...cell pictures early on a cloudy day aren't the greatest. Looking through them I realized that I didn't see the PI splitter over by the dish. Is this normal? I'm guessing it's near/on the outside of the wall where the wire comes in. From the dish to where it enters it's roughly 25 ft. to the wall plate and another 5 ft of wire from the plate to the PI.
Sorry about the quality...cell pictures early on a cloudy day aren't the greatest. Looking through them I realized that I didn't see the PI splitter over by the dish. Is this normal? I'm guessing it's near/on the outside of the wall where the wire comes in. From the dish to where it enters it's roughly 25 ft. to the wall plate and another 5 ft of wire from the plate to the PI.
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=MOgBoy9ScCY
Direct YouTube Link - Hollywood Faces the AI Tipping Point with Robert Tercek
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=MOgBoy9ScCY
Direct YouTube Link - Hollywood Faces the AI Tipping Point with Robert Tercek
TWIT's Website
TWIT Live Feed
0 Replies
·
1 views
Pub Member / Supporter
Lifetime Supporter
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?
As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
6 Replies
·
75 views
However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...
Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.
Supporting Founder
Lifetime Supporter
With the 1st Quarter Report just released, Dish lost another 180,000, now at 4.84 Million.
Sling now at 1.79 million subscribers, down approximately 190,000.
For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.
cordcuttersnews.com
Sling now at 1.79 million subscribers, down approximately 190,000.
For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.
DISH & Sling TV Lost Over 366,000 TV Subscribers In Just 3 Months | Cord Cutters News
EchoStar Corporation, the owner of the DISH Network satellite television service and the Sling TV streaming platform, continued to experience steep declines in its pay-television customer base during the first three months of 2026. The company reported a net loss of approximately 366,000 pay-TV...
cordcuttersnews.com
71 Replies
·
3412 views
Hello Computer On Phone GIF - Hello Computer Hello On Phone - Discover & Share GIFs
Click to view the GIF
tenor.com
Hello again, haven't posted here in a while.
This morning, around 6:30am, I woke up and found the front panel lights on my HR44 on (I leave it off all the time as it is co-located with one of my Geminis).
Immediately thinking that either a reboot or power outage occurred, I checked the software version, and found that it's still the same release that was sent out last month.
I then ruled out a power outage by checking the clocks on my appliances and seeing that they're still correct (they reset when there's an outage, somewhat similar to the "blinking 12" on VCRs).
I then confirmed a reboot by checking the Upcoming Recordings (fka To-Do List) and seeing that the number was much lower than before (it always resets after a reboot).
I am definitely guessing what happened (and it may very well be actually what happened) is that the "Reset Required" prompt may have come up sometime overnight, and it eventually timed out and rebooted automatically. IIRC that prompt comes up when new software "plugins" have to be installed.
Would like to hear your thoughts, especially since I probably haven't talked to some of you reading this in a while (was a former CE member, left almost a year ago).
Thank you all in advance!
This morning, around 6:30am, I woke up and found the front panel lights on my HR44 on (I leave it off all the time as it is co-located with one of my Geminis).
Immediately thinking that either a reboot or power outage occurred, I checked the software version, and found that it's still the same release that was sent out last month.
I then ruled out a power outage by checking the clocks on my appliances and seeing that they're still correct (they reset when there's an outage, somewhat similar to the "blinking 12" on VCRs).
I then confirmed a reboot by checking the Upcoming Recordings (fka To-Do List) and seeing that the number was much lower than before (it always resets after a reboot).
I am definitely guessing what happened (and it may very well be actually what happened) is that the "Reset Required" prompt may have come up sometime overnight, and it eventually timed out and rebooted automatically. IIRC that prompt comes up when new software "plugins" have to be installed.
Would like to hear your thoughts, especially since I probably haven't talked to some of you reading this in a while (was a former CE member, left almost a year ago).
Thank you all in advance!
4 Replies
·
143 views
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67106 Replies
·
2662280 views
Staff member
HERE TO HELP YOU!
Cutting Edge
Our DNS provider is encouraging us to enable DNSSEC on our domains for added security.
I have gone ahead and enabled it, and am told it may take anywhere from 90 minutes to 24 hours for it to take effect.
Hopefully doing this does not harm the site in any way. (It shouldn't) but if it does, you will then know why and I will revert the settings.
But from what I am reading it should be ok. so just giving a warning as I have screwed up DNS stuff in the past.
I have gone ahead and enabled it, and am told it may take anywhere from 90 minutes to 24 hours for it to take effect.
Hopefully doing this does not harm the site in any way. (It shouldn't) but if it does, you will then know why and I will revert the settings.
But from what I am reading it should be ok. so just giving a warning as I have screwed up DNS stuff in the past.
1 Replies
·
36 views
Ham Radio 2.0
Time for another AWESOME video from Ham Radio 2.0!
View: https://www.youtube.com/watch?v=erpXkKWLg54
Direct YouTube Link - I Went Wardriving for Meshtastic and Meshcoree Nodes!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
View: https://www.youtube.com/watch?v=erpXkKWLg54
Direct YouTube Link - I Went Wardriving for Meshtastic and Meshcoree Nodes!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
0 Replies
·
7 views
Staff member
HERE TO HELP YOU!
Cutting Edge
Due to security concerns and the fact that the Tapatalk Plugin for Xenforo is no longer being updated we have removed Tapatalk support from SatelliteGuys.
For those who were using it we recommend using our PWA App instead which is faster and does not have all the spam Tapatalk had. Below is a graphic showing how to add SatelliteGuys to your devices home screen. (While iOS is shown the process is mostly the same for Android.)
Thanks for your understanding.
For those who were using it we recommend using our PWA App instead which is faster and does not have all the spam Tapatalk had. Below is a graphic showing how to add SatelliteGuys to your devices home screen. (While iOS is shown the process is mostly the same for Android.)
Thanks for your understanding.
7 Replies
·
190 views
Actually, PWA stands for "Progressive Web Application" and is basically just saving a site's homepage to your desktop where it appears as an "App" with the rest of your smartphone's Apps.
A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.
TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.
In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.
In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.
And here was the cost of the Premium Tier.
Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.
So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.
Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.
In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.
If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.
Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.
I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]
The above link also explains PWA's better as well.
If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.
But hopefully that explains better why it was removed. It was not done to cut anyone off from the site. Please give the PWA a try.
TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.
In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.
In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.
And here was the cost of the Premium Tier.
Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.
So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.
Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.
In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.
If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.
Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.
I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]
The above link also explains PWA's better as well.
If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.
But hopefully that explains better why it was removed. It was not done to cut anyone off from the site.
Please give the PWA a try.
I just installed the PWA on my Android phone. It was pretty easy to do, and now I'm posting this from my phone. Thanks, Scott!A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.
TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.
In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.
View attachment 191729
In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.
View attachment 191730
And here was the cost of the Premium Tier.
View attachment 191731
Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.
View attachment 191732
So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.
Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.
In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.
If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.
Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.
I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]
The above link also explains PWA's better as well.
If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.
But hopefully that explains better why it was removed. It was not done to cut anyone off from the site.
Staff member
HERE TO HELP YOU!
Cutting Edge
As you may have noticed we are doing a Fund Raiser for SatelliteGuys!
As many of you know I have been paying for a majority of the operation of the site out of my own pocket for awhile now. Now looking at things we have a number of renewals coming up that I could use some help with. These renewals include the license renewal for our Forum Software, Renewal of a number of our add on's the site uses, renewal of domain names etc.
I have set a goal of $400.00 - any extra that comes in will just go to fund the operations of the site. None of the money will go to me (I tried BuyMeACoffee a few months ago, and they denied me saying they do not do business with Satellite Piracy sites... which we are not... hell we host the beta programs for both DISH and DIRECTV here...)
Anyways... if you would like to help out please click the link below.
www.satelliteguys.us
Thank you in advance.
As many of you know I have been paying for a majority of the operation of the site out of my own pocket for awhile now. Now looking at things we have a number of renewals coming up that I could use some help with. These renewals include the license renewal for our Forum Software, Renewal of a number of our add on's the site uses, renewal of domain names etc.
I have set a goal of $400.00 - any extra that comes in will just go to fund the operations of the site. None of the money will go to me (I tried BuyMeACoffee a few months ago, and they denied me saying they do not do business with Satellite Piracy sites... which we are not... hell we host the beta programs for both DISH and DIRECTV here...)
Anyways... if you would like to help out please click the link below.
SatelliteGuys Maintenance Fund Raiser
www.satelliteguys.us
Thank you in advance.
18 Replies
·
567 views
I planned on removing it today, but then my fathers car broke down and I had to drive him all around to get his stuff done. Then I had a doctors appointment after that which was annoying...
Dr asks me if I have had any changes, so I tell him something wrong with me that started a month or so ago and his reply back is, that it sucks to get old... I hate that. Why ask me. if your going to come back with a smart ass answer.
Anyays I hope to get rid of Tapatalk tomorrow.
And we had more people donate today, thank you! The extra money is going to future expenses since things like add ons don't expire at the same time.
THANK YOU, THANK YOU, THANK YOU AGAIN!
Dr asks me if I have had any changes, so I tell him something wrong with me that started a month or so ago and his reply back is, that it sucks to get old... I hate that. Why ask me. if your going to come back with a smart ass answer.
Anyays I hope to get rid of Tapatalk tomorrow.
And we had more people donate today, thank you! The extra money is going to future expenses since things like add ons don't expire at the same time.
THANK YOU, THANK YOU, THANK YOU AGAIN!
Tapatalk has been removed.
I have added a new feature which is a work in progress called "Social Feed" which displays the forums Facebook style. Its nice for people who like that, but needs work. But i have been watching this one for awhile and the author is being really responsive to suggestions and adding them. So if you have any please let me know and I can pass them along.
I have added a new feature which is a work in progress called "Social Feed" which displays the forums Facebook style. Its nice for people who like that, but needs work. But i have been watching this one for awhile and the author is being really responsive to suggestions and adding them. So if you have any please let me know and I can pass them along.
Staff member
HERE TO HELP YOU!
111 Replies
·
2727 views
