Social Feed
Lifetime Supporter
The Titanium Satellite ASC1 Actuator Motor and Polorotor Skew Controller has been manufactured and is now in route to our facility.
Reseller samples will be available on November 20th. Check back on this forum on December 1st for a contest to win this revolutionary dish motor and polarity controller.
Simple
Do you remember when you could simply change channels on your C-band receiver and the your BUD dish automatically moved and the polarity was automatically selected? If the signal wasn't strong enough or it had interference, you would press the skew left or skew right to raise the signal strength, attenuate interference and improve the picture quality? Titanium Satellite remembers and decided that it was time to once again make it easy to watch satellite TV, scan for new channels and provide the optimized reception that is required for reliable reception of the new demanding digital modulations!
Available
There are hundreds and hundreds of C-band TV channels and thousands of radio services that are free and completely legal to enjoy. There are so many more free channels than were available even "back in the day". Yep, we remember the golden age of C-band. Almost every house in the neighborhood had a big dish and we paid thousands of dollars for equipment to watch free back-hauls and movie channels with stunning picture quality. C-band dishes are now free for the removal and usually the motors only need cleaning and grease. Feedhorns might need a wasp nest removed or a LNB replaced, but this gear was built to last and usually still is working great 30 years later! The ASC1's MSRP of $195 is about 1/3rd of the cost of a dish mover in the 1980's. The ASC1 will interface with almost any digital satellite receiver to automatically control the dish movement and polarity setting.
Performance
Do you want the performance of a polorotor feedhorn and the convenience of automatic polarity and optimized skew offset with fine tuning? Is it your dream not to juggle a legacy analog or 4DTV receiver remote just to move the dish and switch polarities each time you change the channel on the digital satellite receiver! Now any member of the house can simply change channels on your favorite digital DVBS/S2 receiver and the dish will automatically move and the polarity and offset skew is automatically selected. No more trying to remember what button sequence to move the dish to the right satellite or which channel to select to provide the correct polarity.
Compatible
The ASC1 is truly a heavy duty and quality built prosumer grade controller that provides features and functions that are not even available on expensive commercial rack mount controllers costing 10x more! The ASC1 works with virtually all MPEG2/4, DVBS/S2 DiSEqC 1.2 satellite receivers and can be manually controlled by front panel or the included IR remote control if used with any receiver not supporting the standard DiSEqC 1.2 protocol. The ASC1 controls motorized linear actuators or Horizon to Horizon type dishes with reed switch type counter, mechanical or voltage controlled polarity control, LNBs, LNBFs and pass-through for control of 22Khz and DiSEqC switches. Yes, your favorite DVBS or S2 receiver can now completely control both small motorized KU dishes and the larger C-band "BUD" dishes.
Powerful
Designed with the versatility to control and power both LNBFs, LNBs, pass switch commands and generate or regenerate switching voltages, the ASC1 works on virtually any consumer or commercial system. Packed with the lifting power rated to a maximum of 38Vdc at 5amps, the ASC1 will lift any motorized dish. No other consumer motor controller even comes close to the power provided by the ASC1. The F-fitting port simultaneously provides voltage that is user set to 13/18Vdc, reversed 18/13Vdc, fixed 13Vdc or fixed 18Vdc at 450mA. Our proprietary motor control feature ramps in and out the motor speed at the beginning and end of a motor movement. This minimizes wear and tear on your dish mount and frame. The ramp also allows micro adjustments when fine-tuning the dish positioning. No more speeding past the correct motor landing and having to bump the dish back and forth into position.
Communication
The ASC1 has another great feature not found on any other consumer positioner that will allow Titanium to provide new functions and save you countless hours of programming satellite positions with remote control entry. A free PC based editor and loader software program is available to connect to the ASC1 serial RS-232 port. Update with new firmware, back-up the user database by saving the satellite positions, names and polarity settings with skew offsets as a PC file. Edit satellite names, positioner counts and independent skew offsets for horizontal and vertical polarities. No more losing all of the satellite positions after a factory reset or wearing out your fingers on a remote! Share a satellite positioner file with anther ASC1 user and simply shift the positioner counts, fine tune and save the skew settings to match the new system installation.
International
The user selectable 115/230VAC @ 50/60hz switch and user changeable rear panel fuse block feeds a dual tap transformer allowing the ASC1 to be used anywhere in the world. The user may use the appropriate regional plug configuration and readily available international standard IEC type 3 pin cord to plug into any AC power source and pin configuration. The North American version is delivered with a UL certified cord with the standard 2 blade and ground plug. International stocking distributors will be supplied with the appropriate blade configuration for their region.
Tough
Now lets talk about rugged construction. The machined aluminum housing with louvered side panels and integrated lifting handles are assembled with contrasting Allen Head hardware. The ASC1 not only looks great, but also protects your investment from the bumps and drops as the TV center is rearranged or if the unit is carried outside to align a dish. Heavy duty screw terminals ensure full voltage and sensor counts and securely attach each connection. The front panel features full function control and programming with the seven rubberized buttons and lock-out feature prevents accidental control or programming via the front panel or remote control.
Friendly
The 4 line scrolling green color back lit LCD provides all programming and operational information. This includes the DiSEqC position number, satellite name, positioner count, polarity and +/-45 degree skew offset angle. Indicators show the direction of motor travel and IR/DiSEqC command confirmations and motor/command error descriptions.
Easy
A 22 key IR remote control with included AAA batteries balances well in your hand and the rubberized buttons allow ease of programming for all functions and manual ASC1 operation from the comfort of your easy chair. The line of sight operational range is approximately up to 45 feet and 60 degrees off center.
Quality
If you are searching for the highest quality and value with features that no other satellite dish controller can match, we offer for your consideration, the Titanium Satellite ASC1.
Partners
We are searching worldwide for regional distributors and resellers who have a proven track record and are committed to providing their customers the highest level of customer support. Please partner with Titanium Satellite for quality products that are built to last with unsurpassed performance, quality components and exceptional product support. Reseller Sign-up at http://www.titaniumsatellite.com/
Reseller samples will be available on November 20th. Check back on this forum on December 1st for a contest to win this revolutionary dish motor and polarity controller.
Simple
Do you remember when you could simply change channels on your C-band receiver and the your BUD dish automatically moved and the polarity was automatically selected? If the signal wasn't strong enough or it had interference, you would press the skew left or skew right to raise the signal strength, attenuate interference and improve the picture quality? Titanium Satellite remembers and decided that it was time to once again make it easy to watch satellite TV, scan for new channels and provide the optimized reception that is required for reliable reception of the new demanding digital modulations!
Available
There are hundreds and hundreds of C-band TV channels and thousands of radio services that are free and completely legal to enjoy. There are so many more free channels than were available even "back in the day". Yep, we remember the golden age of C-band. Almost every house in the neighborhood had a big dish and we paid thousands of dollars for equipment to watch free back-hauls and movie channels with stunning picture quality. C-band dishes are now free for the removal and usually the motors only need cleaning and grease. Feedhorns might need a wasp nest removed or a LNB replaced, but this gear was built to last and usually still is working great 30 years later! The ASC1's MSRP of $195 is about 1/3rd of the cost of a dish mover in the 1980's. The ASC1 will interface with almost any digital satellite receiver to automatically control the dish movement and polarity setting.
Performance
Do you want the performance of a polorotor feedhorn and the convenience of automatic polarity and optimized skew offset with fine tuning? Is it your dream not to juggle a legacy analog or 4DTV receiver remote just to move the dish and switch polarities each time you change the channel on the digital satellite receiver! Now any member of the house can simply change channels on your favorite digital DVBS/S2 receiver and the dish will automatically move and the polarity and offset skew is automatically selected. No more trying to remember what button sequence to move the dish to the right satellite or which channel to select to provide the correct polarity.
Compatible
The ASC1 is truly a heavy duty and quality built prosumer grade controller that provides features and functions that are not even available on expensive commercial rack mount controllers costing 10x more! The ASC1 works with virtually all MPEG2/4, DVBS/S2 DiSEqC 1.2 satellite receivers and can be manually controlled by front panel or the included IR remote control if used with any receiver not supporting the standard DiSEqC 1.2 protocol. The ASC1 controls motorized linear actuators or Horizon to Horizon type dishes with reed switch type counter, mechanical or voltage controlled polarity control, LNBs, LNBFs and pass-through for control of 22Khz and DiSEqC switches. Yes, your favorite DVBS or S2 receiver can now completely control both small motorized KU dishes and the larger C-band "BUD" dishes.
Powerful
Designed with the versatility to control and power both LNBFs, LNBs, pass switch commands and generate or regenerate switching voltages, the ASC1 works on virtually any consumer or commercial system. Packed with the lifting power rated to a maximum of 38Vdc at 5amps, the ASC1 will lift any motorized dish. No other consumer motor controller even comes close to the power provided by the ASC1. The F-fitting port simultaneously provides voltage that is user set to 13/18Vdc, reversed 18/13Vdc, fixed 13Vdc or fixed 18Vdc at 450mA. Our proprietary motor control feature ramps in and out the motor speed at the beginning and end of a motor movement. This minimizes wear and tear on your dish mount and frame. The ramp also allows micro adjustments when fine-tuning the dish positioning. No more speeding past the correct motor landing and having to bump the dish back and forth into position.
Communication
The ASC1 has another great feature not found on any other consumer positioner that will allow Titanium to provide new functions and save you countless hours of programming satellite positions with remote control entry. A free PC based editor and loader software program is available to connect to the ASC1 serial RS-232 port. Update with new firmware, back-up the user database by saving the satellite positions, names and polarity settings with skew offsets as a PC file. Edit satellite names, positioner counts and independent skew offsets for horizontal and vertical polarities. No more losing all of the satellite positions after a factory reset or wearing out your fingers on a remote! Share a satellite positioner file with anther ASC1 user and simply shift the positioner counts, fine tune and save the skew settings to match the new system installation.
International
The user selectable 115/230VAC @ 50/60hz switch and user changeable rear panel fuse block feeds a dual tap transformer allowing the ASC1 to be used anywhere in the world. The user may use the appropriate regional plug configuration and readily available international standard IEC type 3 pin cord to plug into any AC power source and pin configuration. The North American version is delivered with a UL certified cord with the standard 2 blade and ground plug. International stocking distributors will be supplied with the appropriate blade configuration for their region.
Tough
Now lets talk about rugged construction. The machined aluminum housing with louvered side panels and integrated lifting handles are assembled with contrasting Allen Head hardware. The ASC1 not only looks great, but also protects your investment from the bumps and drops as the TV center is rearranged or if the unit is carried outside to align a dish. Heavy duty screw terminals ensure full voltage and sensor counts and securely attach each connection. The front panel features full function control and programming with the seven rubberized buttons and lock-out feature prevents accidental control or programming via the front panel or remote control.
Friendly
The 4 line scrolling green color back lit LCD provides all programming and operational information. This includes the DiSEqC position number, satellite name, positioner count, polarity and +/-45 degree skew offset angle. Indicators show the direction of motor travel and IR/DiSEqC command confirmations and motor/command error descriptions.
Easy
A 22 key IR remote control with included AAA batteries balances well in your hand and the rubberized buttons allow ease of programming for all functions and manual ASC1 operation from the comfort of your easy chair. The line of sight operational range is approximately up to 45 feet and 60 degrees off center.
Quality
If you are searching for the highest quality and value with features that no other satellite dish controller can match, we offer for your consideration, the Titanium Satellite ASC1.
Partners
We are searching worldwide for regional distributors and resellers who have a proven track record and are committed to providing their customers the highest level of customer support. Please partner with Titanium Satellite for quality products that are built to last with unsurpassed performance, quality components and exceptional product support. Reseller Sign-up at http://www.titaniumsatellite.com/
113 Replies
·
24766 views
Great News!
The new shipment of updated ASC1s has cleared customs and are in the Titanium Satellite warehouse. Will be shipping the replacement ASC1s to current owners and completing all open orders over the next few days. All units will be tested prior to shipment.
Current ASC1 owners may keep the original unit for their own personal use. The original ASC1 may be gifted to another party, but only with a disclaimer that the gifted ASC1 is without support or warranty. I only ask that these original ASC1 units not be sold, bartered or traded. If you do not wish to keep the original unit, I will email a return shipping label, but it is completely up to you! A note outlining the return process will be included with the replacement ASC1.
Please note that Titanium Satellite support for these original ASC1 units will end upon receipt of the replacement ASC1. Titanium Satellite will not provide parts, warranty, replacements or repairs for the original ASC1 units. The original ASC1 units are easy to identify as they do not have a serial number affixed. All warrantied ASC1 units have been issued a serial number that is recorded in our system, labeled on the bottom of the case and another on the outside of the giftbox. The Titanium Satellite ASC1 warranty, parts, replacements and repairs are only available for serialized units provided with an original proof of purchase. The new replacement ASC1 unit will be shipped with a new zero cost invoice, listing the serial number(s). The one year warranty is renewed and effective as of the new invoice date!
The original ASC1 units may be fixed by any technician following proper safety procedures, familiar and capable of performing surface mount component repair. Only a few capacitors and resistors need to reworked to provide full 22KHz / DiSEqC function and pass-through, but the rework is very precise and the PCB can be very easily damaged. Tomorrow, I will be posting the hardware modification and parts list in the forums.
Thank you everyone for your patience and understanding!
The new shipment of updated ASC1s has cleared customs and are in the Titanium Satellite warehouse. Will be shipping the replacement ASC1s to current owners and completing all open orders over the next few days. All units will be tested prior to shipment.
Current ASC1 owners may keep the original unit for their own personal use. The original ASC1 may be gifted to another party, but only with a disclaimer that the gifted ASC1 is without support or warranty. I only ask that these original ASC1 units not be sold, bartered or traded. If you do not wish to keep the original unit, I will email a return shipping label, but it is completely up to you! A note outlining the return process will be included with the replacement ASC1.
Please note that Titanium Satellite support for these original ASC1 units will end upon receipt of the replacement ASC1. Titanium Satellite will not provide parts, warranty, replacements or repairs for the original ASC1 units. The original ASC1 units are easy to identify as they do not have a serial number affixed. All warrantied ASC1 units have been issued a serial number that is recorded in our system, labeled on the bottom of the case and another on the outside of the giftbox. The Titanium Satellite ASC1 warranty, parts, replacements and repairs are only available for serialized units provided with an original proof of purchase. The new replacement ASC1 unit will be shipped with a new zero cost invoice, listing the serial number(s). The one year warranty is renewed and effective as of the new invoice date!
The original ASC1 units may be fixed by any technician following proper safety procedures, familiar and capable of performing surface mount component repair. Only a few capacitors and resistors need to reworked to provide full 22KHz / DiSEqC function and pass-through, but the rework is very precise and the PCB can be very easily damaged. Tomorrow, I will be posting the hardware modification and parts list in the forums.
Thank you everyone for your patience and understanding!
Great News!
The new shipment of updated ASC1s has cleared customs and are in the Titanium Satellite warehouse. Will be shipping the replacement ASC1s to current owners and completing all open orders over the next few days. All units will be tested prior to shipment.
Current ASC1 owners may keep the original unit for their own personal use. The original ASC1 may be gifted to another party, but only with a disclaimer that the gifted ASC1 is without support or warranty. I only ask that these original ASC1 units not be sold, bartered or traded. If you do not wish to keep the original unit, I will email a return shipping label, but it is completely up to you! A note outlining the return process will be included with the replacement ASC1.
Please note that Titanium Satellite support for these original ASC1 units will end upon receipt of the replacement ASC1. Titanium Satellite will not provide parts, warranty, replacements or repairs for the original ASC1 units. The original ASC1 units are easy to identify as they do not have a serial number affixed. All warrantied ASC1 units have been issued a serial number that is recorded in our system, labeled on the bottom of the case and another on the outside of the giftbox. The Titanium Satellite ASC1 warranty, parts, replacements and repairs are only available for serialized units provided with an original proof of purchase. The new replacement ASC1 unit will be shipped with a new zero cost invoice, listing the serial number(s). The one year warranty is renewed and effective as of the new invoice date!
The original ASC1 units may be fixed by any technician following proper safety procedures, familiar and capable of performing surface mount component repair. Only a few capacitors and resistors need to reworked to provide full 22KHz / DiSEqC function and pass-through, but the rework is very precise and the PCB can be very easily damaged. Tomorrow, I will be posting the hardware modification and parts list in the forums.
Thank you everyone for your patience and understanding!
Any update on when the new units will be shipped ?
Posted Via The FREE SatelliteGuys Reader App!
Just to put a wrap on this thread....
ASC1 version 2 units are shipping and we are about half way through the replacement list. All replacement units will be shipped by mid-week.
ASC1 version 2 units have a serial number affixed to the bottom of the case. This serial number is documented in the customer's or reseller's account and your one year warranty starts fresh upon delivery!
A major firmware version 20140210v2 has been released today adding new features that you have been requesting!
A quality, yet inexpensive USB updating cable has been tested and approved. It works flawlessly with XP/Win7/Win8. Keep a lookout at www.titaniumsatellite.com/products for their arrival. Target MSRP $5.00
Your interest and the sales of the ASC1 have surpassed my expectations! Thank you everyone for your support and patience!
ASC1 version 2 units are shipping and we are about half way through the replacement list. All replacement units will be shipped by mid-week.
ASC1 version 2 units have a serial number affixed to the bottom of the case. This serial number is documented in the customer's or reseller's account and your one year warranty starts fresh upon delivery!
A major firmware version 20140210v2 has been released today adding new features that you have been requesting!
A quality, yet inexpensive USB updating cable has been tested and approved. It works flawlessly with XP/Win7/Win8. Keep a lookout at www.titaniumsatellite.com/products for their arrival. Target MSRP $5.00
Your interest and the sales of the ASC1 have surpassed my expectations! Thank you everyone for your support and patience!
Linus Tech Tips
Time for another AWESOME video from Linus Tech Tips!
View: https://www.youtube.com/watch?v=aV81SqB6HQg
Direct YouTube Link - NVIDIA Told me How to Benchmark RTX Spark
Linus on Facebook
The LTT Store
View: https://www.youtube.com/watch?v=aV81SqB6HQg
Direct YouTube Link - NVIDIA Told me How to Benchmark RTX Spark
Linus on Facebook
The LTT Store
0 Replies
·
0 views
Supporting Founder
Lifetime Supporter
For the naysayers who did not think this service would make it, just added another 4.9M subscribers and that was after the removal of 1.2M Russia subscribers.
This is even better, Paramount+ revenue grew 120% and Subscription revenue grew 74% year-over-year ( 2nd quarter 2021/ 2nd quarter 2022) to $830M, principally reflecting paid subscriber growth on Paramount+.
Now compare that to Peacock with only 13 million paid, 13 million free.
This is even better, Paramount+ revenue grew 120% and Subscription revenue grew 74% year-over-year ( 2nd quarter 2021/ 2nd quarter 2022) to $830M, principally reflecting paid subscriber growth on Paramount+.
Now compare that to Peacock with only 13 million paid, 13 million free.
664 Replies
·
61545 views
So, this means that those of us with Commercial Free subs, won't be Commercial Free, unless we wait till after the show is over ?
Which would make same day, not that big of a deal.
Paramount+ has always had the CBS shows on the CBS local channel and yes with commercials. What they are doing now is releasing the OnDemand versions of the show which I believe they don't release until after the shows air on the west coast. And they will be commercial free if you subscribe to the ad free version of Paramount+.So, this means that those of us with Commercial Free subs, won't be Commercial Free, unless we wait till after the show is over ?
Which would make same day, not that big of a deal.
The new curated multiview is now live.
While on many of the sports channels and non sports channels there is a multi view option button. It will pull up a side bar with many different multi view options.
While on many of the sports channels and non sports channels there is a multi view option button. It will pull up a side bar with many different multi view options.
4 Replies
·
182 views
Pub Member / Supporter
Cutting Edge
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
522 Replies
·
47232 views
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything.
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.To each there own but I've found that Windows can't do much more than Linux can. Can't have everything.
I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
528 Replies
·
17961 views
Remember folks... just like DNS... its always Foxbat.
WTF… …What the Foxbat!Remember folks... just like DNS... its always Foxbat.
S
wow what a kick in the balls!!! the wife blames you when things don't work now scott's blaming youWTF… …What the Foxbat!
I know. Here's what Scott has in store for me if I get out of line:wow what a kick in the balls!!! the wife blames you when things don't work now scott's blaming you
S
OMG to freaking funny
Supporting Founder
Several Dish offers showed up today in my account. Once you choose one the rest are removed. Offers were Showtime, Starz, AMC and others.
33 Replies
·
1594 views
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68496 Replies
·
2670694 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/shorts/z72cjoZP83E
Direct YouTube Link - AI Can Self-Replicate: Unplugging the Threat! #shorts
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/shorts/z72cjoZP83E
Direct YouTube Link - AI Can Self-Replicate: Unplugging the Threat! #shorts
TWIT's Website
TWIT Live Feed
0 Replies
·
19 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/shorts/w5TOILSc_U8
Direct YouTube Link - AI Model Poisoning: The Hidden Threat on Hugging Face #shorts
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/shorts/w5TOILSc_U8
Direct YouTube Link - AI Model Poisoning: The Hidden Threat on Hugging Face #shorts
TWIT's Website
TWIT Live Feed
0 Replies
·
16 views
Help, I'm a little confjused on the activation process.
I purchased the Joey 4 from Solid Signal and shipping box has Call 866 726-4282 to Avtivate new Receiver. That number is Solid Signals number.
I googled and that search said call Dish to activate. I assume that is correct unless this requires a 2 step process.
Please let me know.
Thanks
I purchased the Joey 4 from Solid Signal and shipping box has Call 866 726-4282 to Avtivate new Receiver. That number is Solid Signals number.
I googled and that search said call Dish to activate. I assume that is correct unless this requires a 2 step process.
Please let me know.
Thanks
6 Replies
·
214 views
All good called Dish and new Joey 4 is activated and working.
Old Joey 2 deactivated and no need to return.
Old Joey 2 deactivated and no need to return.
S
i bought mine straight from dish as it was only $ 100.00 bucks!!! had the protection plan they came out removed and deactivated the 4k joey and activated and installed the joey 4.All good called Dish and new Joey 4 is activated and working.
Old Joey 2 deactivated and no need to return.
