Social Feed

RT-Cat
Last reply · posted in Free To Air (FTA) Discussion
Well, this is rather odd. After getting the ASC-1 installed and having several sats setup, I have a very odd operation. Lets say I want to change satellites from 101 to 105. Bring up the satellite list in the Nano, move the cursor to 105, press OK and the usual display of moving dish pops up, and nothing happens with the ASC-1. After a few seconds the display shows "No Signal." Then after waiting anywhere from 30 seconds to a minute and 15 seconds, the ASC-1 comes to life and moves the dish! And sometimes over runs the setting and I have to bump it around to get signal.
The G-Box was working without any problems when it was removed for the ASC-1.
ANY ideas???
32 Replies · 4316 views
Titanium
Update: Neither the RS232 test program software or the ASC1 loader software will recognize the PCs serial port. The port never initializes. RT-Cat is shipping the ASC1 in and I will bench test and load the latest firmware. Once the ASC1 is verified operational and running with latest firmware, we can figure out the PC serial issues.

One thing at a time..... Decided the best thing to do right now is to verify correct operation of the ASC1, update firmware and get RT-Cat enjoying his system!
. Raine
Well, the problem with mine doesn't seem to have been the switch after all. I loaded the latest firmware and hooked it back up to the MicroHD, which had been working fine for a few days with the Vbox. The ASC1 was working absolutely great and better with the new firmware until, same as last time, I programmed in the last few sats again and then everything went out the window. Only this time with the new firmware it would still move automatically to sats with no hangup when selected from the receiver.

Moved to a sat position and no reception, tried another, nothing. Tried to manually move it from the remote and front buttons on the ASC1, the remote plus front panel buttons were locked out it seemed, wouldn't move from either of them.

Hooked the Vbox back up and the count was off by 100 counts or so for each sat. Adjusted for that and everthing's been working fine with the Vbox for a few days now. This is what the ASC1 did before, except this time it still moved to all the sats without hanging up.

Hooked the ASC1 up and did a global reset, programmed in a few sats and it seemed to be working fine. Hooked the Vbox back up, because right now I'm not gonna mess with the ASC1, I have too many other things to do right now, but I am going to try setting it up again soon and I'll document things a lot better, I.E., how many sats are programmed, which one it messes up on, etc.
primestar31
Well, the problem with mine doesn't seem to have been the switch after all. I loaded the latest firmware and hooked it back up to the MicroHD, which had been working fine for a few days with the Vbox. The ASC1 was working absolutely great and better with the new firmware until, same as last time, I programmed in the last few sats again and then everything went out the window. Only this time with the new firmware it would still move automatically to sats with no hangup when selected from the receiver.

Moved to a sat position and no reception, tried another, nothing. Tried to manually move it from the remote and front buttons on the ASC1, the remote plus front panel buttons were locked out it seemed, wouldn't move from either of them.

Hooked the Vbox back up and the count was off by 100 counts or so for each sat. Adjusted for that and everthing's been working fine with the Vbox for a few days now. This is what the ASC1 did before, except this time it still moved to all the sats without hanging up.

Hooked the ASC1 up and did a global reset, programmed in a few sats and it seemed to be working fine. Hooked the Vbox back up, because right now I'm not gonna mess with the ASC1, I have too many other things to do right now, but I am going to try setting it up again soon and I'll document things a lot better, I.E., how many sats are programmed, which one it messes up on, etc.

What kind of sensor cable do you have going out to your actuator motor on your dish? Perhaps the ASC-1 is more sensitive to induction noise that the cable is picking up causing miscounts? If the cable you use has a spare wire left on it, try grounding it on one end. Maybe it'll help as an easy solution.
. Raine
What kind of sensor cable do you have going out to your actuator motor on your dish? Perhaps the ASC-1 is more sensitive to induction noise that the cable is picking up causing miscounts? If the cable you use has a spare wire left on it, try grounding it on one end. Maybe it'll help as an easy solution.

I'll try that when I hook it back up. The cable does have a spare wire that I can use for that. thanks, Primestar. The cable is what came with my RS C dish, has two coax, three wires for the motor and three for the servo. I'm using my ortho, so I can use one of the servo wires for a ground.
Titanium
Only ground a drain wire that is adjoined to a shield. Only connect on one end or the other. Not both.

Document the programming sequence so we have something to go on. There are many directions that we could explore and dozens of variables with the description.

I have programmed all 99 positions with many receivers including the microHD. There are no known issues with current firmware or incompatibilities with the microHD loaded with recent firmware (January or June 2013).

What version ASC1 firmware is loaded?

Perform a Global Reset after loading new firmware?

Using the STB program or loading a Satellite List to the ASC1?

Is a specific position number being saved when problem occurs?

Is it possible that DiSEqC 1.2 resync option was selected on the STB?

Did any unusual characters display on the ASC1 LCD? If so, when?

Was the count display immediately out of sync after programming a position or was it incorrect after power cycling?

How many DiSEqC 1.2 positions does the STB firmware support? 99?

Did the count increase/decrease when the STB moved the actuator (front panel EAST/WEST disabled)?

What menu line was selected when the EAST/WEST buttons were unresponsive?

Thanks!


Brian Gohl
Titanium Satellite
zippyfrog
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
3 Replies · 45 views
zippyfrog
Never mind - according to chat, it seems like there is a glitch in their website. The prices for owned receivers are still $5.00.
zippyfrog
However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...

1781191675068.webp
  • Like
Reactions: charlesrshell
T
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67106 Replies · 2662267 views
  • Like
Reactions: c-spand
ClarkGable
No Time - The Guess Who
  • Like
Reactions: sdfntx
harshness
Time After Time - Cyndi Lauper
sdfntx
Right on Time - Brandi Carlile
gms49ers
Time Stand Still - Rush
Bobby
I Can't Help It (If I'm Still In Love With You) - B.J. Thomas
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SatelliteGuys Support Center
Our DNS provider is encouraging us to enable DNSSEC on our domains for added security.

I have gone ahead and enabled it, and am told it may take anywhere from 90 minutes to 24 hours for it to take effect.

Hopefully doing this does not harm the site in any way. (It shouldn't) but if it does, you will then know why and I will revert the settings.

But from what I am reading it should be ok. so just giving a warning as I have screwed up DNS stuff in the past. :D
1 Replies · 30 views
Scott Greczkowski
Doing my checks it appears the changes have gone through... and we are still here. (Phew!)
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SatelliteGuys Support Center
Due to security concerns and the fact that the Tapatalk Plugin for Xenforo is no longer being updated we have removed Tapatalk support from SatelliteGuys.

For those who were using it we recommend using our PWA App instead which is faster and does not have all the spam Tapatalk had. Below is a graphic showing how to add SatelliteGuys to your devices home screen. (While iOS is shown the process is mostly the same for Android.)

add_to_home.gif

Thanks for your understanding. :)
7 Replies · 183 views
Foxbat
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
dweber
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
  • Like
Reactions: charlesrshell
Peter Parker
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
Hooray!
  • Like
Reactions: charlesrshell
Peter Parker
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
Do you mean the safari browser?
Foxbat
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
Actually, PWA stands for "Progressive Web Application" and is basically just saving a site's homepage to your desktop where it appears as an "App" with the rest of your smartphone's Apps.
1781162703297.webp
  • Like
Reactions: charlesrshell
Scott Greczkowski
A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.

TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.

In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.

Screenshot 2026-06-11 085611.webp



In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.

Screenshot 2026-06-11 085641.webp


And here was the cost of the Premium Tier.

Screenshot 2026-06-11 085701.webp


Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.

Screenshot 2026-06-11 090141.webp



So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.

Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.

In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.

If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.

Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.

I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]

The above link also explains PWA's better as well. :)

If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.

But hopefully that explains better why it was removed. It was not done to cut anyone off from the site. :) Please give the PWA a try.
NYDutch
A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.

TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.

In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.

View attachment 191729


In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.

View attachment 191730

And here was the cost of the Premium Tier.

View attachment 191731

Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.

View attachment 191732


So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.

Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.

In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.

If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.

Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.

I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]

The above link also explains PWA's better as well. :)

If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.

But hopefully that explains better why it was removed. It was not done to cut anyone off from the site. :) Please give the PWA a try.
I just installed the PWA on my Android phone. It was pretty easy to do, and now I'm posting this from my phone. Thanks, Scott!
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SatelliteGuys Support Center
As you may have noticed we are doing a Fund Raiser for SatelliteGuys!

As many of you know I have been paying for a majority of the operation of the site out of my own pocket for awhile now. Now looking at things we have a number of renewals coming up that I could use some help with. These renewals include the license renewal for our Forum Software, Renewal of a number of our add on's the site uses, renewal of domain names etc.

I have set a goal of $400.00 - any extra that comes in will just go to fund the operations of the site. None of the money will go to me (I tried BuyMeACoffee a few months ago, and they denied me saying they do not do business with Satellite Piracy sites... which we are not... hell we host the beta programs for both DISH and DIRECTV here...)

Anyways... if you would like to help out please click the link below.


Thank you in advance. :)
18 Replies · 562 views
Scott Greczkowski
I planned on removing it today, but then my fathers car broke down and I had to drive him all around to get his stuff done. Then I had a doctors appointment after that which was annoying...

Dr asks me if I have had any changes, so I tell him something wrong with me that started a month or so ago and his reply back is, that it sucks to get old... I hate that. Why ask me. if your going to come back with a smart ass answer.

Anyays I hope to get rid of Tapatalk tomorrow. :)

And we had more people donate today, thank you! The extra money is going to future expenses since things like add ons don't expire at the same time.

THANK YOU, THANK YOU, THANK YOU AGAIN!
T
Yeah, dr's...joint pain? Your joints are wearing out. It hurts when I do this...don't do that
comfortably_numb
Dr asks me if I have had any changes, so I tell him something wrong with me that started a month or so ago and his reply back is, that it sucks to get old

No excuse for a flippant response like that from a doctor! I'd be looking for a different one.
Scott Greczkowski
Tapatalk has been removed.

I have added a new feature which is a work in progress called "Social Feed" which displays the forums Facebook style. Its nice for people who like that, but needs work. But i have been watching this one for awhile and the author is being really responsive to suggestions and adding them. So if you have any please let me know and I can pass them along. :)
navychop
😍
  • Like
Reactions: charlesrshell
Scott Greczkowski
We got more kind donations yesterday! Again a very big thank you to everyone for your support!
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Sports Section
111 Replies · 2723 views
  • Like
Reactions: Foxbat and meStevo
Foxbat
Awesome pictures, Yespage! Thanks!

I caught the end of the four hour race on YouTube so I wasn't "spoiled", but got to see the exciting last lap action in the TCR division!
Y
Awesome pictures, Yespage! Thanks!

I caught the end of the four hour race on YouTube so I wasn't "spoiled", but got to see the exciting last lap action in the TCR division!
I heard on the radio, after the final pitstop, Turner Motorsport were resigned to second place. 'You're in second. Don't worry about it. First is McLaren, we aren't catching them.'
  • Like
Reactions: Foxbat
Y
Caught up to the 500... err... k in St. Louis. What a race! Andretti Motorsport were doing very well with Ericsson and Kirkwood, meanwhile Power was moving up the grid. Veekay started cautiously. He was working the tires just right, becoming more lethal later in the stint. Rasmussen was racing likewise, not nearly as insane as he has in the past. Palou was leading the race, in a shocker to all. Caio Collet was having a wonderful ride, making Ferucci potentially sweat a bit. Rain came, rain went, rain came, rain went. Generally mild sprinkles, but enough to pause racing on an oval.

Palou would kind of send Siegel into the wall. Siegel really didn't do much wrong. As he noted, you have to turn at some point. Palou had acres of room below and Siegel might have had his ticket out of Indycar stamped. Dixon was doing the fuel thing and got busted twice by yellows, not pitting before the flag came out. Then the most critical happened... Palou ran out of gas on pit lane, effectively giving Newgarden the race lead and win. Newgarden had a very early pit, so he was able to slide in, get service and go. Meanwhile, everyone else was confused and stuck behind Palou for a bit. Once people figured what was happening, Newgarden had a major advantage of several seconds. Newgarden wouldn't look back and when it went green again, he'd hold the lead for the win.

Massive credit to Juncos Hollinger who bested Penske in getting Veekay out before Malukas in a transition that was oddly bizarre. I haven't had time to check, but I'm wondering if Veekay was about to run out of fuel or cut a tire. He was charging late in a stint, got up to fifth, and then tailed back for a few laps to 10th or 11th. It looked like it was over. Went into the pits, and after the pitting sequence was over, Veekay was well inside the top ten again. It was weird. And he charged, getting up to fourth. He made a late move on Rasmussen, but Rasmussen held his position with some great driving. In fact, there was a ton of incredible racing passing, not passing all race long. Veekay would finish 4th. A podium would have been awesome, but it is a great outcome for a guy who hopefully will get a break with a big team. We saw what Veekay could do with a Honda last season with fuel save, imagine replacing Simpson on Ganassi and having speed to go with fuel saving. His 6th at Indy and 4th at St. Louis get him up to 13th in the points standings and only 5 points outside of the top 10.

Ericsson finished second, resigned to finishing behind the current best in the world guy on a short oval. Rasmussen got the final step on the podium, a nice rebound to what has been an otherwise bad year for him, and a good reward to ECR who just extended his contract.
Y
They raced USAC cars at Daytona once. Once! People died. Aj Foyt said 'f this', and left after the first go around. AJ freaking Foyt thought it was crazy! And cars weren't nearly as fast as they are now.

I think they tried Talladega once too.
Y
LeMans qualifying on going. WEC has d9ne a great job expanding the automotive company entries. Even without Porsche, a large nunber of manufacturers.
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in Computers and Gadgets
I have had good experiences with Brave but lately I am frustrated with it.

Now when I launch the app it shows a box at the bottom asking if I want to go back to the last opened page. It is in conveniently located and I would prefer to eliminate it.

Does anyone know how to do this?

Please let's not sidetrack the discussion into an exploration of why I don't care for it or a lecture about all the wonderful aspects of the feature. I just do not care for it.
3 Replies · 70 views
b4pjoe
I don't have an Android phone so I don't know if this will apply to the Brave settings on your android device but it works on the desktop for me.

Change this setting to either startup to a different website or a new tab page. I have mine set to open to google.com instead of where I left off and it doesn't ask me at the next startup if I want to open the last opened page unless it crashed.

Screenshot 2026-06-10 at 6.46.20 PM.webp
Peter Parker
I don't have an Android phone so I don't know if this will apply to the Brave settings on your android device but it works on the desktop for me.

Change this setting to either startup to a different website or a new tab page. I have mine set to open to google.com instead of where I left off and it doesn't ask me at the next startup if I want to open the last opened page unless it crashed.

View attachment 191721
Thank you for trying to help. However thrse choices do not appear in Android. There is a setting for "New Tab Pages" that is similar but does not include your choice. I have tried all of the existing entries with no success
  • Like
Reactions: b4pjoe
Juan
Something like this maybe


Option 2: Set a custom Home button URL
  1. Click the menu icon in the top-right corner and select Settings.
  2. Click on Appearance in the left sidebar.
  3. Toggle on the Show home button switch.
  4. Under the home button settings, select the option to Enter custom web address and type in your preferred website. [1, 2, 3, 4, 5]
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5346 Replies · 509290 views
osu1991
Rooster Cogburn.

Keep forgetting the free movies on youtube are ad free with my premium subscription.
dfergie
Rooster Cogburn.

Keep forgetting the free movies on youtube are ad free with my premium subscription.
There are some really good movies on youtube.
Saving Private Ryan 4k, Dolby Atmos...
harshness
Saving Private Ryan 4k, Dolby Atmos...
These are severely limited. Getting better than stereo audio is improving, but still has a long way to go.
dfergie
These are severely limited. Getting better than stereo audio is improving, but still has a long way to go.
I went with my 4k disc after checking out that version.
osu1991

View: https://youtu.be/I68627xyDPA?is=gUZB0Yv_08pE0DR3


Tonight revisiting one of my favorites. Ranks up there with Star Wars, Raiders of the Lost Ark and Hunt For Red October.
dfergie
Watching Monterey Pop, been awhile, had the DVD, but probably lost in the fire 10.5 years ago. HBOmax
"MysteryMan"
813WnPwdB3L._SX342_.webp
  • Like
Reactions: dfergie