Social Feed
Supporting Founder
I just mounted a circular-polaized lnb next to my Ku one on my Winegard. I wish my camera worked in sunlight, I think I did quite a nice job 
I got a new DMS International 4 in 1 DiSEqC Switch (Diseqc 2.0) included when I bought my Twinhan 102g, so I figured I'd use that. It's hooked up between the lnb's and the motor, with the Ku (center) lnb on Pos1, and the offset circular lnb on Pos2 on the switch. I fired up ProgDVB, set it to Diseqc 1.0/2.0, and set the afformentioned lnb settings.
Sound good? Becuase it doesn't work
Am I victim of a cheap nonfunctional switch? Can my Twinhan not handle a 2.0 switch? Are the stars not aligned correctly? 
I got a new DMS International 4 in 1 DiSEqC Switch (Diseqc 2.0) included when I bought my Twinhan 102g, so I figured I'd use that. It's hooked up between the lnb's and the motor, with the Ku (center) lnb on Pos1, and the offset circular lnb on Pos2 on the switch. I fired up ProgDVB, set it to Diseqc 1.0/2.0, and set the afformentioned lnb settings.
Sound good? Becuase it doesn't work
Am I victim of a cheap nonfunctional switch? Can my Twinhan not handle a 2.0 switch? Are the stars not aligned correctly?
6 Replies
·
2140 views
Sounds like that's exactly how I have it hooked up, but it won't function 
Either the card can't use it, or the switch is a dud.
That's annoying... don't have another switch, will ahve to buy one and hope it works next time. I thought DMS was supposed to be great?
Either the card can't use it, or the switch is a dud.
That's annoying... don't have another switch, will ahve to buy one and hope it works next time. I thought DMS was supposed to be great?
I'll trade you my POS CoolSAt 4x1 for your DMSi oneCharredPC said:Sounds like that's exactly how I have it hooked up, but it won't function
Either the card can't use it, or the switch is a dud.
That's annoying... don't have another switch, will ahve to buy one and hope it works next time. I thought DMS was supposed to be great?
.For real though, if you want to try the Coolsat one I'll toss it in the mail to you. I think I'm going to buy another DMSi one if I need another. The CoolSat one works, I just had to add slip-on F connector adaptors because the theads were cut on it with a worn out die or something.
I use it to test with. I didn't notice any ill-effects with it installed but I wouln't leave it permanently installed the way it is.
M
did you make sure your computer was off before hooking switch up?
DMSI is a great company, so let's not bash the company when it could be user error
If you change ANYTHING in your setup, you have to have the master switch off before changing
-add or remove a motor
-add or remove a switch
-add or remove a LNB
I have used 4 different brands of switches and the DMSI ones are the best Ive worked with. Have had one on my setup for 1 1/2 years with no issues
CharredPC said:
did you make sure your computer was off before hooking switch up?
DMSI is a great company, so let's not bash the company when it could be user error
If you change ANYTHING in your setup, you have to have the master switch off before changing
-add or remove a motor
-add or remove a switch
-add or remove a LNB
I have used 4 different brands of switches and the DMSI ones are the best Ive worked with. Have had one on my setup for 1 1/2 years with no issues
Iceberg said:
Yes. Also completely shut down and recycled power again to be sure afterwards.
Iceberg said:
I doubt it's user error, but point taken. Didn't mean to knock DMSI; I was more referring to the research I did online where everyone claims low-quality switches off ebay simply don't work or work only half the time. I therefore said, "I thought DMSI was supposed to be great" to get verification
Should have been clearer.Iceberg said:If you change ANYTHING in your setup, you have to have the master switch off before changing
-add or remove a motor
-add or remove a switch
-add or remove a LNB
I have used 4 different brands of switches and the DMSI ones are the best Ive worked with. Have had one on my setup for 1 1/2 years with no issues
TBH, I haven't always master-switched-off for all those. Though I should, and probably will in the future (experience is making me more responsible, I guess
). I'm getting a temporary switch from Shawn (thanks Shawn!!) that will let me make sure it's not my card or setup that's the issue. After being sure this DMSI switch is defective, I'll send it to Cascade or somone to use as a doorstop and order a new one from Pete
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=JL5XFOpX4_A
Direct YouTube Link - Tech News Weekly 441
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=JL5XFOpX4_A
Direct YouTube Link - Tech News Weekly 441
TWIT's Website
TWIT Live Feed
0 Replies
·
2 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/shorts/CRhynF2RE20
Direct YouTube Link - Home Theater Audio: JBL SCL-6 Speaker Custom Build! #shorts
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/shorts/CRhynF2RE20
Direct YouTube Link - Home Theater Audio: JBL SCL-6 Speaker Custom Build! #shorts
TWIT's Website
TWIT Live Feed
0 Replies
·
1 views
Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
0 Replies
·
4 views
Staff member
HERE TO HELP YOU!
We have a Breakfast and Dinner thread so...
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5389 Replies
·
334594 views
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.
Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.
Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.
Congrats! I love retirement, no wake ups, no e-mails...Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.
Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.
View attachment 191651
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.
New low power station has been granted by the FCC and the new call leter is K33OB-D on RF ch. 33.
Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.
It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.
This new station is owned by Digital Network and what kind of programmings is unkown at this time.
Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.
It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.
This new station is owned by Digital Network and what kind of programmings is unkown at this time.
10 Replies
·
150 views
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets on like the Rev'n, Karate Acton movies, different kind of music videos on the new station. 
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets like Revn, Karate Acton movies, different kind of music videos on the new station.
I watch MovieSphere Gold channel a lot. Many recent movies on that digitnet
Yes that's a good channel MovieSphere, only thing is the missing CC on it.
Linus Tech Tips
Time for another AWESOME video from Linus Tech Tips!
View: https://www.youtube.com/watch?v=6FoAOhbeo5Y
Direct YouTube Link - I Found Free Money in the Tech House
Linus on Facebook
The LTT Store
View: https://www.youtube.com/watch?v=6FoAOhbeo5Y
Direct YouTube Link - I Found Free Money in the Tech House
Linus on Facebook
The LTT Store
0 Replies
·
4 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=MOgBoy9ScCY
Direct YouTube Link - Hollywood Faces the AI Tipping Point with Robert Tercek
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=MOgBoy9ScCY
Direct YouTube Link - Hollywood Faces the AI Tipping Point with Robert Tercek
TWIT's Website
TWIT Live Feed
0 Replies
·
2 views
Pub Member / Supporter
Lifetime Supporter
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?
As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
6 Replies
·
86 views
However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...
Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.
Supporting Founder
Lifetime Supporter
With the 1st Quarter Report just released, Dish lost another 180,000, now at 4.84 Million.
Sling now at 1.79 million subscribers, down approximately 190,000.
For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.
cordcuttersnews.com
Sling now at 1.79 million subscribers, down approximately 190,000.
For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.
DISH & Sling TV Lost Over 366,000 TV Subscribers In Just 3 Months | Cord Cutters News
EchoStar Corporation, the owner of the DISH Network satellite television service and the Sling TV streaming platform, continued to experience steep declines in its pay-television customer base during the first three months of 2026. The company reported a net loss of approximately 366,000 pay-TV...
cordcuttersnews.com
71 Replies
·
3426 views
Hello Computer On Phone GIF - Hello Computer Hello On Phone - Discover & Share GIFs
Click to view the GIF
tenor.com
Hello again, haven't posted here in a while.
This morning, around 6:30am, I woke up and found the front panel lights on my HR44 on (I leave it off all the time as it is co-located with one of my Geminis).
Immediately thinking that either a reboot or power outage occurred, I checked the software version, and found that it's still the same release that was sent out last month.
I then ruled out a power outage by checking the clocks on my appliances and seeing that they're still correct (they reset when there's an outage, somewhat similar to the "blinking 12" on VCRs).
I then confirmed a reboot by checking the Upcoming Recordings (fka To-Do List) and seeing that the number was much lower than before (it always resets after a reboot).
I am definitely guessing what happened (and it may very well be actually what happened) is that the "Reset Required" prompt may have come up sometime overnight, and it eventually timed out and rebooted automatically. IIRC that prompt comes up when new software "plugins" have to be installed.
Would like to hear your thoughts, especially since I probably haven't talked to some of you reading this in a while (was a former CE member, left almost a year ago).
Thank you all in advance!
This morning, around 6:30am, I woke up and found the front panel lights on my HR44 on (I leave it off all the time as it is co-located with one of my Geminis).
Immediately thinking that either a reboot or power outage occurred, I checked the software version, and found that it's still the same release that was sent out last month.
I then ruled out a power outage by checking the clocks on my appliances and seeing that they're still correct (they reset when there's an outage, somewhat similar to the "blinking 12" on VCRs).
I then confirmed a reboot by checking the Upcoming Recordings (fka To-Do List) and seeing that the number was much lower than before (it always resets after a reboot).
I am definitely guessing what happened (and it may very well be actually what happened) is that the "Reset Required" prompt may have come up sometime overnight, and it eventually timed out and rebooted automatically. IIRC that prompt comes up when new software "plugins" have to be installed.
Would like to hear your thoughts, especially since I probably haven't talked to some of you reading this in a while (was a former CE member, left almost a year ago).
Thank you all in advance!
4 Replies
·
152 views
