Update and Question at the bottom of my message
I contacted Channels 9,14,34,and 52's engineers yesterday. OK here goes, Channel 9's signal they said would be at full power starting today 7-1 i checked it this morning and i get a clear picture now with no breakup or loss of signal and the signal strength bar is all the way at a constant 97 now, so channel 9 should be good to go. I contacted KTBO channel 14 about the low audio on digital channel 14.1 they said they are working on getting it fixed it is a problem with a server. Channel 52 KSBI should be up and running again the engineer said they had a receiver go down and had to send it off to France for repair he said he got it back and in operation again Wednesday evening and the digital stream was back on again with PSID data included, I did a scan yesturday and my voom receiver locked on 51.1 and 51.2 just fine good strong signal now. Now i still cannot get KOCB channel 34 i get a strong signal for them on the RF frequency when i punch in there RF # on the aim antenna screen, the engineer said that the signal is there with PSID data and everything but my receiver will not scan in channel 34, he said the actual digital #'s for KOCB are 31.1 which i received my voom receiver from south carolina and i already have there local station on 31.1 etc, he said to clear those out and rescan but since these were original channels iwas told there is no way to delete them permanetly, so if that s the case i will need to get another voom receiver if i want to get channel 34. so if that is correct anyone considering purchaseing a voom receiver should do a check on what local channels the receiver was picking up from where it is comming from and if there are any that are the same as the new locals you will be adding in i would avoid buying it unless you dont care about getting that particular channel.
Thanks
Bobby