Social Feed
Lifetime Supporter
For better portability of recorded shows in ts format, What should I use to convert them and what to convert them too?
Handbrake? Convert to MP4?
Mainly interest in playing on a Samsung TV that supports MP4.
What are your experiences?
I looked at Handbrake and there are a ton of settings, confusing.
Handbrake? Convert to MP4?
Mainly interest in playing on a Samsung TV that supports MP4.
What are your experiences?
I looked at Handbrake and there are a ton of settings, confusing.
20 Replies
·
3146 views
Ok I did it.
The recording I am working on is in two parts. I converted each part to mp4 separately with VidCoder.
Then, not wanting to spend any money just yet found a decent program called Avidemux-2.6-64bit.
http://fixounet.free.fr/avidemux/
It is super simple to use. And the wiki page has some pretty extensive documentation.
And most important of all with free video editing software, no spyware included.
Open the program and set output to MP4 muxer. Leave all the other settings alone. Click on File, Open and open the first mp4 file. Click on the A button at the beginning of what you want to cut out. Now here is the most important part, navigate with only the up/down arrows on the keyboard when cutting, this will land you on "keyframes". As I understand it keyframes are were you want to splice, if you don't do it this way, the program will warn you when you try to save the result.
Anyway navigate with the up/down arrows, click A where you want to start the cut and B where you want to stop the cut then click Edit, then delete. When all the editing is done, its time to join the next part.
Click on File, then Append, and chose the second part. finish up the next part with up/down and A/B.
Once you get the hang its pretty quick to do. The join points in the final product were slight to semi noticeable but not bad at all.
Then just click on File and Save.
Fairly simple controls. Use the media controls for preview and postview of your cuts not for navigating to cut points. Use up/down keys on keyboard and A and B buttons for cutting. File and Edit menu items at the top were used.
Initial recording in ts format: 2GB
Final size of edited mp4: 329MB
Once I get the hang of this, and if I want to continue, I will definitely look into VieoReDo.
The recording I am working on is in two parts. I converted each part to mp4 separately with VidCoder.
Then, not wanting to spend any money just yet found a decent program called Avidemux-2.6-64bit.
http://fixounet.free.fr/avidemux/
It is super simple to use. And the wiki page has some pretty extensive documentation.
And most important of all with free video editing software, no spyware included.
Open the program and set output to MP4 muxer. Leave all the other settings alone. Click on File, Open and open the first mp4 file. Click on the A button at the beginning of what you want to cut out. Now here is the most important part, navigate with only the up/down arrows on the keyboard when cutting, this will land you on "keyframes". As I understand it keyframes are were you want to splice, if you don't do it this way, the program will warn you when you try to save the result.
Anyway navigate with the up/down arrows, click A where you want to start the cut and B where you want to stop the cut then click Edit, then delete. When all the editing is done, its time to join the next part.
Click on File, then Append, and chose the second part. finish up the next part with up/down and A/B.
Once you get the hang its pretty quick to do. The join points in the final product were slight to semi noticeable but not bad at all.
Then just click on File and Save.
Fairly simple controls. Use the media controls for preview and postview of your cuts not for navigating to cut points. Use up/down keys on keyboard and A and B buttons for cutting. File and Edit menu items at the top were used.
Initial recording in ts format: 2GB
Final size of edited mp4: 329MB
Once I get the hang of this, and if I want to continue, I will definitely look into VieoReDo.
Pub Member / Supporter
Cutting Edge
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
521 Replies
·
47179 views
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything.
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.To each there own but I've found that Windows can't do much more than Linux can. Can't have everything.
I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
As I said above, and, FWIW, I run Win11 Pro and Arch on separate 250 GB NVME drives, using F8 to select which I boot to, with a 1TB SSD for storage, accessible to both OSs and a third formatted Nvme I want to use to learn Kali. It was much faster to setup Arch than it was to strip down Windows. Windows still takes much longer to boot.
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
527 Replies
·
17906 views
Remember folks... just like DNS... its always Foxbat. 
WTF… …What the Foxbat!Remember folks... just like DNS... its always Foxbat.
S
wow what a kick in the balls!!! the wife blames you when things don't work now scott's blaming youWTF… …What the Foxbat!
I know. Here's what Scott has in store for me if I get out of line:wow what a kick in the balls!!! the wife blames you when things don't work now scott's blaming you
Help, I'm a little confjused on the activation process.
I purchased the Joey 4 from Solid Signal and shipping box has Call 866 726-4282 to Avtivate new Receiver. That number is Solid Signals number.
I googled and that search said call Dish to activate. I assume that is correct unless this requires a 2 step process.
Please let me know.
Thanks
I purchased the Joey 4 from Solid Signal and shipping box has Call 866 726-4282 to Avtivate new Receiver. That number is Solid Signals number.
I googled and that search said call Dish to activate. I assume that is correct unless this requires a 2 step process.
Please let me know.
Thanks
6 Replies
·
191 views
All good called Dish and new Joey 4 is activated and working.
Old Joey 2 deactivated and no need to return.
Old Joey 2 deactivated and no need to return.
S
i bought mine straight from dish as it was only $ 100.00 bucks!!! had the protection plan they came out removed and deactivated the 4k joey and activated and installed the joey 4.All good called Dish and new Joey 4 is activated and working.
Old Joey 2 deactivated and no need to return.
Supporting Founder
Pub Member / Supporter
Lifetime Supporter
Apple has finally released their Apple TV 4K with built-in Siri and a microphone so it can respond to your queries even if you don't have the remote. It also increases in price, to $299. I had been planning on updating my current Apple TV 4K streamers, but that's $600 for the two of them, and that's a pass at this point.
At $299, it had better come with 256 GB of Storage, Gigabit (or better) Ethernet, the latest HDMI tech and standards, and one year of free Apple One. But it probably won't…
At $299, it had better come with 256 GB of Storage, Gigabit (or better) Ethernet, the latest HDMI tech and standards, and one year of free Apple One. But it probably won't…
Apple TV 4K
Apple TV 4K. New Siri AI and hands-free control. Stunning picture and immersive HomePod surround sound. Works with your Apple and smart home devices.
www.apple.com
14 Replies
·
173 views
S
. apple's been making money off of software and not hardware for a while
they all do that anyways.. ever notice your cell phone slows down when you come up for an upgrade..
. apple's been making money off of software and not hardware for a while
The new curated multiview is now live.
While on many of the sports channels and non sports channels there is a multi view option button. It will pull up a side bar with many different multi view options.
While on many of the sports channels and non sports channels there is a multi view option button. It will pull up a side bar with many different multi view options.
3 Replies
·
157 views
Supporting Founder
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
141 Replies
·
1347 views
Supporting Founder
Lifetime Supporter
This thread is a place to discuss the 4K events that appear on channel 540. We are getting, at this point, one college football game a week. Let's hope there is more coming.
1931 Replies
·
298852 views
Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.
I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.
edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.
As I recall you have the Flex package. Do you sub to multisport? -02 is FS1 and -03 is ESPN. -01 is Fox so you would get that if you sub to locals.Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.
I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.
edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=87N42NxLPC0
Direct YouTube Link - 8 U.S. States Sue OpenAI Over Safety Concerns With Younger Users
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=87N42NxLPC0
Direct YouTube Link - 8 U.S. States Sue OpenAI Over Safety Concerns With Younger Users
TWIT's Website
TWIT Live Feed
0 Replies
·
11 views
Pub Member / Supporter
On Tuesday, I recorded the first episodes of the new season's NCIS shows on CBS (Dish provided, not OTA). The new New York series and Origins will both do Auto Skip, but the original, now season 24 does not. What's stranger, when I do a search for NCIS, Origins and New York show the current recording and the next episode it will record, but the original show only shows the current recording and some other channel showing the very first episode of season one. It makes no sense. When I set up the timers, I was able to use search for Origins and New York, but for the original, I had to scroll ahead in the guide until last Tuesday when the show was airing. Then set the timer from there. You can see its timer type is DVR where the other two are Seek. What am I missing?
Thanks!
Thanks!
20 Replies
·
390 views
