Social Feed

L
Last reply · posted in DISH Network Support Forum
I know. I'm new here and probably shouldn't make such a bold statement.

I have a Hopper with Sling, 1 Super Joey, and 2 Joeys. Yes, I'm a novice to DISH, some 2 months. But I gave up DirecTV after 21 1/2 years. However, to solve my recent DISH problem, DISH sent out their field tech to set up the new Hopper they had shipped to me a few days before. It would not install based on their scripted program. The technician had the same problems, bad signal, he said, but finally got going after some 2 house of diligence.

The problem at the root of my call for help?

Go to settings, DVR Timer Defaults, Max. events to keep. I originally had set that Max to 3 and kind of forgot all about it. Weeks later I noticed by pressing DVR button that my series records had gone wild -- Duck Dynasty had stored some 55 recordings, PGA tour, a dozen or so, and on and on.

Long story short, phone tech help couldn't solve it and sent out the new box. Well, the default setting was 20 so I again set it to 3 some 4 days ago. Did the new box help? Nope: Currently, Duck Dynasty has 4 recordings so it has already exceeded the limit of 3.

It didn't really surprise me because what I learned yesterday. I remembered my nephew nearby also has DISH, a similar installation. I went over there and checked out his recordings and his limits. He had no idea there was a limit setting so his was at the default of 20. However, one of his programs on the History channel had already accumulated 51 programs.

Evidence that the limit setting doesn't work.

If I had gone to my nephew's before I called DISH for help I wouldn't have bothered them. Not only did it cost DISH hundreds of dollars in equipment and labor, it cost its customer (me) a half day of inconvenience. It's a good thing I'm retired and no longer in the work force or I'd have lost some valuable earnings for that time. Plus, we lost all our prior recordings that were on the "old" Hopper. Yes, the series settings were restored, but several were not.

DISH could save themselves much grief by directing this problem to their programmers and not be deluded into thinking a new piece of hardware will solve all problems.
Len

ps: Before signing up to this forum I was able to find a similar thread from last October or November. I would have posted to that thread but couldn't find it again. Sorry for that.
7 Replies · 10670 views
DWS44
Welcome to SatGuys!

This is kind of a sanity check question...you say you changed the default limit from 20 back to 3, but did you also change the limit for your existing timers (i.e. Duck Dynasty) to 3, or did you leave them as how you had them setup prior? Reason I say this...the default limit is the number applied to any new timers created after that default had been set; however, changes to the default do not retroactively change the limit on timers created before then. Once a timer is created, the max number of recordings is set based on the default setting at that time, and does not change for that timer, unless you edit that specific timer.
Hall
you say you changed the default limit from 20
If the max # (default) is (20), he should never had ended up with (55) recordings of Duck Dynasty, irregardless of when he reduced the max to (3) though.

I've never changed the overall max # but have set individual timers to a smaller number. With the default of (20), I shouldn't have 20+ of anything but I have seen more in the past. Not sure if I have more than that with any program at the moment, but will check shortly.
JSheridan
I've got a few timers like Jeopardy and some news shows set to save only 1 episode. They usually work right and only 1 episode is saved. Very, very occasionally an extra episode will show up. :)
L
"There was no reason to lose the old recordings when you got the replacement Hopper, all you had to do was transfer them to an ext hard drive. Might be something to remember with this new one, it's simple to do."

I happened to have my external HD free to use for this purpose since I am now storing my files on cloud so I decided to give that a try. Another waste of time and effort, not just mine but the phone tech who was trying to take me through the scripted steps. The hopper system recognized my disk but just couldn't take it to the final stage of saving the files. As an aside, when the field tech arrived he conceded that he had tried the external hard drive saving technique with no success.

"Reason I say this...the default limit is the number applied to any new timers created after that default had been set; however, changes to the default do not retroactively change the limit on timers created before then. Once a timer is created, the max number of recordings is set based on the default setting at that time, and does not change for that timer, unless you edit that specific timer."

I'm not sure I follow your reasoning here. When I received the new box there were zero shows recorded. I then immediately set the default from 20 to 3. Further, I have never, ever, used those individual program timers. I assume (incorrectly?) that those timers can override the defaults, else it would be foolish otherwise.
ChadT41
Did you transfer timers form old reciever to the new one? Or did you go through the guide(after 72 hours) and setup a whole new timer, verifying that it is set for save 3?
Hall
He's new to Dish - he first saw this issue with the original receiver. It continued with the replacement.

As he says, the default # for all timers is (20), which means we should never have more than (20) recordings of a show. I have had more than (20) myself in the past (none currently though). I have never changed the # for all timers although I have reduced the number for individual timers. I can't say I've ever seen it exceed the # I picked.

It almost appears that the default # for all timers simply isn't being followed (my experience, the OP's, and his friends').
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
7 Replies · 195 views
  • Like
Reactions: dfergie
dishstaller
Sorry for posting the wrong link. Just corrected it.
  • Like
Reactions: Foxbat
dfergie
I loved it when Rodney was on the Tonight Show...
  • Like
Reactions: dishstaller
Foxbat
Sorry for posting the wrong link. Just corrected it.
Thanks, I wasn't sure if you had the wrong Subject or the wrong YouTube link.
  • Like
Reactions: dishstaller
osu1991
Was a Don Rickles fan. I've dvr'd most of his appearances on Carson from the antenna tv replays.

  • Like
Reactions: dfergie
dishstaller
More Dangerfield rapid fire on Carson.


View: https://www.youtube.com/watch?v=scEQFHQHHhU
  • Like
Reactions: dfergie
dishdude
Rodney Dangerfield is great. One of his best one liners - "My wife likes to talk to me during sex, last night she called me from Florida!"

Jackie Gleason is another one of the greats.


View: https://youtu.be/ciUV77AzIB4
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in Movie Talk
5 Replies · 150 views
primestar31

Wait, didn't this one come out a few years ago? It was all in Japanese. It was also VERY good!

OK, looked it up, that was Godzilla Minus One
Bruce
Wait, didn't this one come out a few years ago? It was all in Japanese. It was also VERY good!

OK, looked it up, that was Godzilla Minus One
At theaters, only in Japanese, on Disc and Netflix, available in English.
Foxbat
New trailer has dropped:
​
long_time_Dish
Looks good! I'm interested...
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Videos like this can make you appreciate the things we take for granted.


View: https://www.youtube.com/shorts/a2cgQidHQJI
4 Replies · 90 views
Bobby
Videos like this can make you appreciate the things we take for granted.


View: https://www.youtube.com/shorts/a2cgQidHQJI

That brought tears to my eyes.
  • Like
Reactions: NYDutch
dishstaller
That brought tears to my eyes.
Really...REALLY hate to do this to you Bobby, but....


View: https://www.youtube.com/watch?v=LsOo3jzkhYA&pp=ygUed29tYW4gaGVhcnMgZm9yIHRoZSBmaXJzdCB0aW1l
  • Like
Reactions: NYDutch and Bobby
dishstaller
Okay....if you think you can take it....this one brought tears to my eyes when I first saw it and did again just now.


View: https://www.youtube.com/shorts/i5UCDwHMatg?feature=share
  • Like
Reactions: NYDutch and Bobby
dishstaller
This came up in my suggestions probably because of the video I posted. I had NO idea exactly what being color blind actually was. Now I understand why that man was so blown away with seeing the trees......a lot of color blind people see green as brown, so grass, trees, etc all look brown.


View: https://www.youtube.com/watch?v=i18_RngKJDQ
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.

Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.

You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.



View: https://youtu.be/Uecu2seh4b4


Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.


View: https://youtu.be/iws3rh5vLAQ
124 Replies · 3712 views
  • Like
Reactions: osu1991
Foxbat
Looks like Episode 55 is over at 09:00 HST, just under six hours. The USGS said the fountains reached 720' or 220 meters.
​
  • Like
Reactions: RaiderPower
Foxbat
The USGS Kīlaeua Webcam #1 has been showing overflows and doming from the North vent overnight. Maybe the volcanic plumbing has settled back into its two-three week cycle of fountaining?

But I do miss the little cinder cone that broke up in the last episode.
Foxbat
Sorry, I should have posted these earlier:

​

We're still waiting on the start of Episode 56.
  • Like
Reactions: RaiderPower
Foxbat
At 08:01 HST 11/05/2026, the North Vent produced what I would call a "wet burp" after the precursory "pistoning" events, small amounts of lava pouring out of the vent for a few seconds to minutes and then everything recedes. There must have been a gas bubble holding thing back because two minutes later the lava started flowing out of the vent in all directions. Then, at 08:25, it stopped. What a tease! I thought this was how Episode 56 started.

About 12 minutes later at 08:38, the North vent once again started overflowing and picked up steam at 08:42. By 09:00, slight doming could be seen in the pool of lava in the vent. Surely this is it!

But, 09:50 and things wind down again. By 09:57 HST there's just fumes coming out of the vent. Phooey.

But then 10:00 comes and the heavy lava flows kick in again. This time seems like the real deal. At 10:30 HST there's little spurts of lava flying up in the air over the vent, but more from gas than a steady fountain of lava. This looks promising!

11:30 HST and the color of the lava is definitely hotter, and the intensity has picked up to a definite dome and precursor to fountaining. The USGS calls Episode 56 as officially starting at 12:10 HST:

Alert Level: WATCH, Color Code: ORANGE 2026-11-05 22:29:12 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Thursday, November 5, 2026, 12:29 PM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H514
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 56 of the ongoing Halemaʻumaʻu eruption began at 12:10 PM HST on November 5, 2026.

Volcanic Activity:
Episode 56 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 12:10 PM HST on November 5, 2026.

Lava fountain heights are relatively low at about 100 ft (30 meters), but will likely increase. Ground-level sensors near the eruptive vents indicate that winds are blowing from the northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the southwest direction from Halemaʻumaʻu.
  • Like
Reactions: meStevo
Foxbat
​
  • Like
Reactions: RaiderPower
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5397 Replies · 511788 views
dfergie

Last of the Dogmen is my favorite of hers.
  • Like
Reactions: osu1991
"MysteryMan"
Gone.webp
osu1991
Star Wars Despecialized Edition

IMG_0803.webp
osu1991
  • Like
Reactions: dfergie
dishstaller
Just watched Napoleon. Good night.....all of those young men dying for the egos of their leaders. Now we can kill at a distance, back then you saw the man you were killing eye to eye.
comfortably_numb
Pub Member / Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Not sure saving $24/year is worth it unless you're a hardcore Philo user. I'll stick with monthly.

IMG_0351.webp
7 Replies · 246 views
Jimbo
Not sure saving $24/year is worth it unless you're a hardcore Philo user. I'll stick with monthly.

View attachment 195247
$24 for the Year, would be more useful.
Howard Simmons
$24 for the Year, would be more useful.
But when you cancel you still have to watch until the plan runs out. With monthly you're done at the end of the month.
Jimbo
But when you cancel you still have to watch until the plan runs out. With monthly you're done at the end of the month.
Sorry, my point was the expense.
comfortably_numb
$24 for the Year, would be more useful.

Philo's monthly price is reasonable, IMO, because it's still the cheapest way I'm aware of to get all the linear Discovery networks AND access to the Discovery Go apps.
  • Like
Reactions: Howard Simmons
Jimbo
Philo's monthly price is reasonable, IMO, because it's still the cheapest way I'm aware of to get all the linear Discovery networks AND access to the Discovery Go apps.
I guess if it was something I used on a regular basis, I suppose.
  • Like
Reactions: Howard Simmons
comfortably_numb
In other Philo news..

IMG_0364.webp
Bobby
Oh boy, I can't wait! 😂
K
Pub Member / Supporter Lifetime Supporter
Last reply · posted in TV Shows
'Rockford Files' Reboot Gets NBC Pilot Order

I grow tired of all the reboots. Most I don't bother with but will depend on the actor chosen.
19 Replies · 765 views
long_time_Dish
Yeah, I'll check it out as well, but shan't be holding my breath...It'll be tough to equal James Garner in that role...
  • Like
Reactions: Foxbat
harshness
...It'll be tough to equal James Garner in that role...
I can think of a few actors (including some females) who might fit the bill.

This will all depend on the storyline. I'm not sure how well it will translate. Modern TV hasn't been all that kind to PIs and even less kind to CIs (confidential informants).
K
Premier is Saturday, Jan 2nd. Moving to Thursday on the 7th.
long_time_Dish

I wonder how they're/if they're going to do something like the answering machine message opening? It was always funny...
  • Like
Reactions: dfergie
osu1991
Pub Member / Supporter
· posted in Movie Talk
0 Replies · 32 views
  • Like
Reactions: Foxbat and dfergie
osu1991
Pub Member / Supporter
· posted in Movie Talk
0 Replies · 37 views
  • Like
Reactions: Foxbat
M
Last reply · posted in DISH Network Support Forum
I have Dish with Hopper3. I choose to get local channels OTA and had a "guide list" established at my previous home. Having moved a few miles away, I wanted to update the list by appending a couple new stations via a rescan. As many would know, some stations come in with the UHF/VHF antenna aimed in one direction, while others come in better with a different direction.

Unfortunately, when a scan is done (bringing in 25-30 stations for that particular antenna aim), the dialog screen does not present the established guide list; it presents an empty field to the right that the scanned stations may be selected one by one and added to the empty guide. But because of antenna aim, some stations originally saved are missing, and would have to be retrieved with a different antenna aim. But as I explain, if a 2nd​ scan is done with a different antenna aim, the stations saved from the first scan are lost.

It troubles me that Dish didn't develop software that would allow a user to simply append only 1 or 2 channels to the established list. :mad:

Any thought on this? Has anyone experienced this or heard of this from others?
15 Replies · 536 views
dishstaller
I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.
  • Like
Reactions: charlesrshell
N
I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.
I am not sure about that but I do know that you could manually add additional channels just by entering the actual RF channel number and the older receivers would add the virtual channels to your list
dishstaller
I am not sure about that but I do know that you could manually add additional channels just by entering the actual RF channel number and the older receivers would add the virtual channels to your list
Like I said.....that has been many years ago. Swapped my 722K for a Hopper in 2012.

It does seem like I remember having to delete the existing channels when we did a rescan. Back then our local stations KEPT monkeying around with things and it was non-stop complaints from customers about their channels not coming in. Got so bad that I stopped selling OR installing OTAs....something I had been doing since 1984 so you know it HAD to be pretty bad.
M
You made one of my points for me with this comment, Dishstaller:

"... local stations KEPT monkeying around with things and it was non-stop complaints from customers about their channels not coming in ..."
dennispap
I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.
I remember that also on my 722.
dishstaller
I remember that also on my 722.
Thanks.....has been too many years to remember clearly.
  • Like
Reactions: charlesrshell
Bobby
Keep in mind that the 722 had a built in OTA tuner and the 722K had a plug in module for OTA. The Hoppers and Wallys use an add on USB OTA dongle. I believe they are entirely different.