Social Feed

Jon J
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
To fast forward using the 52.0 remote you are instructed to hold down the forward arrow button. The speed should start at 4X and increase the longer you hold the key down. However, I don't seem to be quick enough to ever FWD at only 4X speed. I jump to 15X every time. Is there a trick to get the slower speed?
29 Replies · 12410 views
Tron2012
To fast forward using the 52.0 remote you are instructed to hold down the forward arrow button. The speed should start at 4X and increase the longer you hold the key down. However, I don't seem to be quick enough to ever FWD at only 4X speed. I jump to 15X every time. Is there a trick to get the slower speed?
DWS44 Jim S.

Unless I'm missing something here we DO have (something like) 4x. It's labeled "slow". Not part of the regular cycle speeds, but still available for those that like to slow playback down.

During recording playback or when you are rewound in live TV:
<New remotes> Press and hold the skip/fast forward button to cycle through your normal 15x, 60x and 300x. Each press with advance to the next speed.
<Old 40 remotes> Just press the fast forward button to cycle.

For slow motion:
Press the pause button first
and while you see the pause screen with the bottom banner timeline, then press the skip/fast forward button <40 remotes use the fast forward button>. You will see the word "slow" to the right. Ta Da!
or
Press the pause button and wait until the pause screen with the bottom banner timeline disappears, then press the skip/fast forward button <40 remotes do not have to wait for the banner to disappear; just pause then use the skip forward button>. You are now in frame-by-frame mode.

Press the pause button again to return to normal speed playback.

Supposedly you can do the same pause then rewind, but it does not play smoothly like the slow motion forward. More like a skip back a few frames, play, skip back a few more frames, play, ....
  • Like
Reactions: scottk52
DWS44
DWS44 Jim S.

Unless I'm missing something here we DO have (something like) 4x. It's labeled "slow". Not part of the regular cycle speeds, but still available for those that like to slow playback down.

During recording playback or when you are rewound in live TV:
<New remotes> Press and hold the skip/fast forward button to cycle through your normal 15x, 60x and 300x. Each press with advance to the next speed.
<Old 40 remotes> Just press the fast forward button to cycle.

For slow motion:
Press the pause button first
and while you see the pause screen with the bottom banner timeline, then press the skip/fast forward button <40 remotes use the fast forward button>. You will see the word "slow" to the right. Ta Da!
or
Press the pause button and wait until the pause screen with the bottom banner timeline disappears, then press the skip/fast forward button <40 remotes do not have to wait for the banner to disappear; just pause then use the skip forward button>. You are now in frame-by-frame mode.

Press the pause button again to return to normal speed playback.

Supposedly you can do the same pause then rewind, but it does not play smoothly like the slow motion forward. More like a skip back a few frames, play, skip back a few more frames, play, ....

The original 4X was a FF/REW speed that was 4 times faster than normal playback speed. It was a FF/REW speed that was not as fast as 15X (which is obviously 15 times faster than normal speed)...Unless I'm missing something, the "4X" you are describing is the slightly sped up slow motion (i.e. still slower than normal playback speed, not faster).
  • Like
Reactions: Tron2012
N
If I remember correctly there used to be multiple slow speeds now with the new carbon UI it looks like they have just one slow speed getting rid of the others.
They need to bring those back also. This new UI is nice but why have they removed so many features that have been on the DISH DVRs for years?
Hall
Unless I'm missing something, the "4X" you are describing is the slightly sped up slow motion (i.e. still slower than normal playback speed, not faster).
No, there was definitely a 4X "faster" option. There was also a 1/4 "slow-motion" option. To get it, you had to pause first and then hit the FF button once. I believe you could hit it a 2nd time and get a faster slow-motion choice too. If I'm not mistaken, both of these slow-motion options are gone now too.
Tron2012
The original 4X was a FF/REW speed that was 4 times faster than normal playback speed. It was a FF/REW speed that was not as fast as 15X (which is obviously 15 times faster than normal speed)...Unless I'm missing something, the "4X" you are describing is the slightly sped up slow motion (i.e. still slower than normal playback speed, not faster).

Thanks for the reminder. For years I rarely used the fast forwards and mostly rely on the skip ahead/back if I want to move in small chunks (like others who have mastered the skip ahead 6 or whatever times to skip past commercials or in between downs in a football game). Why I didn't remember the slower speed. Generally I use the fast forwards when I really want to move ahead or back a long way. But understand some people use the DVR in different ways.

Maybe the 'slow' will help ease the pain for some who miss the old 4x then. ;)
  • Like
Reactions: DWS44
Jon J
I wonder if any DISH people will read this and pass along our wishes to whomever can get 4X returned?
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in Movie Talk
5 Replies · 150 views
primestar31

Wait, didn't this one come out a few years ago? It was all in Japanese. It was also VERY good!

OK, looked it up, that was Godzilla Minus One
Bruce
Wait, didn't this one come out a few years ago? It was all in Japanese. It was also VERY good!

OK, looked it up, that was Godzilla Minus One
At theaters, only in Japanese, on Disc and Netflix, available in English.
Foxbat
New trailer has dropped:
​
long_time_Dish
Looks good! I'm interested...
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Videos like this can make you appreciate the things we take for granted.


View: https://www.youtube.com/shorts/a2cgQidHQJI
4 Replies · 90 views
Bobby
Videos like this can make you appreciate the things we take for granted.


View: https://www.youtube.com/shorts/a2cgQidHQJI

That brought tears to my eyes.
  • Like
Reactions: NYDutch
dishstaller
That brought tears to my eyes.
Really...REALLY hate to do this to you Bobby, but....


View: https://www.youtube.com/watch?v=LsOo3jzkhYA&pp=ygUed29tYW4gaGVhcnMgZm9yIHRoZSBmaXJzdCB0aW1l
  • Like
Reactions: NYDutch and Bobby
dishstaller
Okay....if you think you can take it....this one brought tears to my eyes when I first saw it and did again just now.


View: https://www.youtube.com/shorts/i5UCDwHMatg?feature=share
  • Like
Reactions: NYDutch and Bobby
dishstaller
This came up in my suggestions probably because of the video I posted. I had NO idea exactly what being color blind actually was. Now I understand why that man was so blown away with seeing the trees......a lot of color blind people see green as brown, so grass, trees, etc all look brown.


View: https://www.youtube.com/watch?v=i18_RngKJDQ
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.

Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.

You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.



View: https://youtu.be/Uecu2seh4b4


Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.


View: https://youtu.be/iws3rh5vLAQ
124 Replies · 3712 views
  • Like
Reactions: osu1991
Foxbat
Looks like Episode 55 is over at 09:00 HST, just under six hours. The USGS said the fountains reached 720' or 220 meters.
​
  • Like
Reactions: RaiderPower
Foxbat
The USGS Kīlaeua Webcam #1 has been showing overflows and doming from the North vent overnight. Maybe the volcanic plumbing has settled back into its two-three week cycle of fountaining?

But I do miss the little cinder cone that broke up in the last episode.
Foxbat
Sorry, I should have posted these earlier:

​

We're still waiting on the start of Episode 56.
  • Like
Reactions: RaiderPower
Foxbat
At 08:01 HST 11/05/2026, the North Vent produced what I would call a "wet burp" after the precursory "pistoning" events, small amounts of lava pouring out of the vent for a few seconds to minutes and then everything recedes. There must have been a gas bubble holding thing back because two minutes later the lava started flowing out of the vent in all directions. Then, at 08:25, it stopped. What a tease! I thought this was how Episode 56 started.

About 12 minutes later at 08:38, the North vent once again started overflowing and picked up steam at 08:42. By 09:00, slight doming could be seen in the pool of lava in the vent. Surely this is it!

But, 09:50 and things wind down again. By 09:57 HST there's just fumes coming out of the vent. Phooey.

But then 10:00 comes and the heavy lava flows kick in again. This time seems like the real deal. At 10:30 HST there's little spurts of lava flying up in the air over the vent, but more from gas than a steady fountain of lava. This looks promising!

11:30 HST and the color of the lava is definitely hotter, and the intensity has picked up to a definite dome and precursor to fountaining. The USGS calls Episode 56 as officially starting at 12:10 HST:

Alert Level: WATCH, Color Code: ORANGE 2026-11-05 22:29:12 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Thursday, November 5, 2026, 12:29 PM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H514
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 56 of the ongoing Halemaʻumaʻu eruption began at 12:10 PM HST on November 5, 2026.

Volcanic Activity:
Episode 56 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 12:10 PM HST on November 5, 2026.

Lava fountain heights are relatively low at about 100 ft (30 meters), but will likely increase. Ground-level sensors near the eruptive vents indicate that winds are blowing from the northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the southwest direction from Halemaʻumaʻu.
  • Like
Reactions: meStevo
Foxbat
​
  • Like
Reactions: RaiderPower
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5397 Replies · 511787 views
dfergie

Last of the Dogmen is my favorite of hers.
  • Like
Reactions: osu1991
"MysteryMan"
Gone.webp
osu1991
Star Wars Despecialized Edition

IMG_0803.webp
osu1991
  • Like
Reactions: dfergie
dishstaller
Just watched Napoleon. Good night.....all of those young men dying for the egos of their leaders. Now we can kill at a distance, back then you saw the man you were killing eye to eye.
comfortably_numb
Pub Member / Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Not sure saving $24/year is worth it unless you're a hardcore Philo user. I'll stick with monthly.

IMG_0351.webp
7 Replies · 245 views
Jimbo
Not sure saving $24/year is worth it unless you're a hardcore Philo user. I'll stick with monthly.

View attachment 195247
$24 for the Year, would be more useful.
Howard Simmons
$24 for the Year, would be more useful.
But when you cancel you still have to watch until the plan runs out. With monthly you're done at the end of the month.
Jimbo
But when you cancel you still have to watch until the plan runs out. With monthly you're done at the end of the month.
Sorry, my point was the expense.
comfortably_numb
$24 for the Year, would be more useful.

Philo's monthly price is reasonable, IMO, because it's still the cheapest way I'm aware of to get all the linear Discovery networks AND access to the Discovery Go apps.
  • Like
Reactions: Howard Simmons
Jimbo
Philo's monthly price is reasonable, IMO, because it's still the cheapest way I'm aware of to get all the linear Discovery networks AND access to the Discovery Go apps.
I guess if it was something I used on a regular basis, I suppose.
  • Like
Reactions: Howard Simmons
comfortably_numb
In other Philo news..

IMG_0364.webp
Bobby
Oh boy, I can't wait! 😂
K
Pub Member / Supporter Lifetime Supporter
Last reply · posted in TV Shows
'Rockford Files' Reboot Gets NBC Pilot Order

I grow tired of all the reboots. Most I don't bother with but will depend on the actor chosen.
19 Replies · 765 views
long_time_Dish
Yeah, I'll check it out as well, but shan't be holding my breath...It'll be tough to equal James Garner in that role...
  • Like
Reactions: Foxbat
harshness
...It'll be tough to equal James Garner in that role...
I can think of a few actors (including some females) who might fit the bill.

This will all depend on the storyline. I'm not sure how well it will translate. Modern TV hasn't been all that kind to PIs and even less kind to CIs (confidential informants).
K
Premier is Saturday, Jan 2nd. Moving to Thursday on the 7th.
long_time_Dish

I wonder how they're/if they're going to do something like the answering machine message opening? It was always funny...
  • Like
Reactions: dfergie
osu1991
Pub Member / Supporter
· posted in Movie Talk
0 Replies · 32 views
  • Like
Reactions: Foxbat and dfergie
osu1991
Pub Member / Supporter
· posted in Movie Talk
0 Replies · 37 views
  • Like
Reactions: Foxbat
M
Last reply · posted in DISH Network Support Forum
I have Dish with Hopper3. I choose to get local channels OTA and had a "guide list" established at my previous home. Having moved a few miles away, I wanted to update the list by appending a couple new stations via a rescan. As many would know, some stations come in with the UHF/VHF antenna aimed in one direction, while others come in better with a different direction.

Unfortunately, when a scan is done (bringing in 25-30 stations for that particular antenna aim), the dialog screen does not present the established guide list; it presents an empty field to the right that the scanned stations may be selected one by one and added to the empty guide. But because of antenna aim, some stations originally saved are missing, and would have to be retrieved with a different antenna aim. But as I explain, if a 2nd​ scan is done with a different antenna aim, the stations saved from the first scan are lost.

It troubles me that Dish didn't develop software that would allow a user to simply append only 1 or 2 channels to the established list. :mad:

Any thought on this? Has anyone experienced this or heard of this from others?
15 Replies · 535 views
dishstaller
I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.
  • Like
Reactions: charlesrshell
N
I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.
I am not sure about that but I do know that you could manually add additional channels just by entering the actual RF channel number and the older receivers would add the virtual channels to your list
dishstaller
I am not sure about that but I do know that you could manually add additional channels just by entering the actual RF channel number and the older receivers would add the virtual channels to your list
Like I said.....that has been many years ago. Swapped my 722K for a Hopper in 2012.

It does seem like I remember having to delete the existing channels when we did a rescan. Back then our local stations KEPT monkeying around with things and it was non-stop complaints from customers about their channels not coming in. Got so bad that I stopped selling OR installing OTAs....something I had been doing since 1984 so you know it HAD to be pretty bad.
M
You made one of my points for me with this comment, Dishstaller:

"... local stations KEPT monkeying around with things and it was non-stop complaints from customers about their channels not coming in ..."
dennispap
I could very well be wrong....it has been a LOT of years but back when I had a 722K it seemed like when you went back to the scan screen that you could just scan again and it would ADD those channels to the previous list or you could delete the previous results and only add the channels from the new scan.
I remember that also on my 722.
dishstaller
I remember that also on my 722.
Thanks.....has been too many years to remember clearly.
  • Like
Reactions: charlesrshell
Bobby
Keep in mind that the 722 had a built in OTA tuner and the 722K had a plug in module for OTA. The Hoppers and Wallys use an add on USB OTA dongle. I believe they are entirely different.
Linus Tech Tips
· posted in Linus Tech Tips
0 Replies · 29 views