Jimbo, the destination travel trailer has 2 satellite in connections on the outside. I have the 2 connection splitter right out there. Inside, each Directv box is connected with a short coax to 1 of the 2 cable outputs embedded in the camper at each tv location (main room and bedroom), The other coax connection, which comes in from the HD antenna on top of the unit goes directly to the TV. The Hisense TV that came with the camper (and is at the main location) is working fine, while my Hannspree tv in the bedroom is having this issue. I had an SD box in the bedroom b/4, but now have the H24-200 box and it works well ONCE I re-select an input source each time I power it on and it says "no signal" via the HDMI1 it is now set to. Again, I have to use the TV controller to select any other input source, whether an actual connection or not, and then re-select the HdMI1 - and then the DIrectv signal comes right up. I believe all the wiring and internal camper connections are working fine. I think it may be an issue within the TV, AND I was wondering why the DIrectv remote will not LET me select a CHANGE in the input source when the TV Input button is clicked - even tho it does DISPLAY all of the Input Sources available.