As I have gotten more into it and have tried different things I have learned a bit more. I said in my previous post that the Joey 3 works fine. Well it turns out that it mostly works fine, except on SD recordings! I have a Hopper 3; a Joey 3 and a 4K Joey. I have recently replaced the Hopper, the 4k Joey and swapped a Joey 2 for the Joey 3. My main problem is with the 4K Joey (and this is a new 4K Joey that was recently swapped because of this issue).
*I have no issues with the Hopper...there is no jumping with any program.
*Every program I have recorded and tested with the 4k Joey ... (except 3).... jump about 15 minutes at 15X and about 30 minutes at 60X speed. I can't find any reason why I found 3 programs that seem to run OK. They happen to be short (1/2 hr HD programs).. but I have found other short HD programs that do "jump".
*With the Joey 3 I first thought it was OK,,, but I very rarely watch or record SD programs, but the 4 SD programs I have recorded recently with the Joey 3 jump. (PS . The Joey 3 is as fast as the Hopper and 4K Joey, so except for the jumping issue with SD programs I like it!)
When I find a program that does or doesn't jump I can go back to it and get repeatable results. I tried to test all the programs the same way... making the first pause after about 5 minutes into the recording and thereafter about every 15 minutes. All the observations above were on the same programs watched on all three devices! I was initially fooled because a couple of programs seem to not jump during the first pause after about 5 minutes, but if I made the first pause a bit longer than 5 minutes, then they "jumped". I put the 4K Joey on a TV that I seldom use so it doesn't bug me like it did. And since the Hopper is good and I seem to have no problems on the Joey 3 except with SD programs, I am relatively happy.
I have found a few threads with other people complaining, but this seems to be an unresolved issue. I have had two Dish Tech visits lately and have been able to demonstrate the problem to them. New equipment hasn't resolved the issue,,,, so I don't know what it will take to get it resolved!! The "skip " function works OK, but if you "overshoot" a location by 15 minutes you have to hit the "skip back" button 90 times (10 secs per hit). If you try to fast forward backwards, it also jumps erratically... so you wind up playing "virtual pingpong". Someone from the "case management" team called and I told my story. Perhaps there are not enough complaints to get this issue to someones attention that can figure it out! I understand there are not a lot of 4K Joeys out there, so maybe thats why theres not a lot of people complaining about this. The fact that recordings jump on my Joey 3 when replaying a SD program is another fact that should tell someone something. I really wish someone with similar equipment would test what I've done and let me know if they see the same results as I do.
I don't like the idea of not having 4K capability on a TV that is used a lot, but at this point in time there really isn't much 4K programming out there anyway.