Social Feed

R.I.P.

My Mom was a huge McMillan & Wife fan.

RIP

Mcmillan and wife was where I remember her from, R.I.P. ...

R.I.P.

Rest in Peace… I had forgotten she was Kate in "Kate and Allie", teamed with Jane Curtin.

If Love Must Go - Dobie Gray

Drift Away - Dobie Gray

Throwing It All Away - Genesis

All I Need is a Miracle - Mike + The Mechanics

Sweet Miracle - Rush

IFixIt has published their Teardown and they had some positive things to say about the iPhone Duo. It still showed some dust ingress into the hinge assembly but seemed otherwise well-sealed.

But with a considerable number of reports of the main screen dying with similar failures, AppleCare+ should be a no-brainer for this phone.

Foxbat said:

IFixIt has published their Teardown and they had some positive things to say about the iPhone Duo. It still showed some dust ingress into the hinge assembly but seemed otherwise well-sealed.

​

But with a considerable number of reports of the main screen dying with similar failures, AppleCare+ should be a no-brainer for this phone.

Click to expand...

hope you have apple care a screen job is 1000.00 . can we say over priced garbage!!!

View: https://www.youtube.com/watch?v=iv0BssMerjA

Gone are the days when Apple "perfects" what debuted years earlier on an Android phone.

harshness said:

Gone are the days when Apple "perfects" what debuted years earlier on an Android phone.

Click to expand...

Or better yet, innovate something "completely revolutionary!"

View: https://www.youtube.com/watch?v=J6x_VHuZW2k

Paranormal Files back in business:

Two new Bonus View channels Added today:



And two Removed:



My full list is at: DISH TV "Bonus View" Channels

Thanks to Pat for the heads up.

One Bonus View channel added today. And one correction (on my part):



One Removed:



My full list is at: DISH TV "Bonus View" Channels

BTW, not a Bonus View item, but there was a temporary channel 304 Spooktacular added, I imagine just for the Halloween season.

Thanks again to Pat for the many tips.

Three new Bonus View channels today:



My full list is at: DISH TV "Bonus View" Channels

As always, thanks to Pat for the tips.

Four Bonus View channels removed today:

2 egg burrito with bacon and a side of hashbrowns. Coffee.

Breakfast Quesadillas. Grilled flour tortilla filled with scrambled eggs, hash browns, chopped green chile, cheddar & Jack cheese and bacon. Coffee.

Taco omelette. 3 eggs, taco meat from yesterday, diced green chilis, cheddar cheese, chopped red onion, avocado, black olives, chopped tomato, La Victoria Salsa Brava.

This one was really, really good!

Thought I was getting a Chorizo and egg burrito (marker had rubbed off)but was a roast beef/potato I made up before hunting this morning.
Btw every morning at camp I cooked my homemade Chorizo and scrambled eggs plus sausage side while my brother brought bacon. (they liked both the beef and pork versions)

dfergie said:

Thought I was getting a Chorizo and egg burrito (marker had rubbed off)but was a roast beef/potato I made up before hunting this morning.
Btw every morning at camp I cooked my homemade Chorizo and scrambled eggs plus sausage side while my brother brought bacon. (they liked both the beef and pork versions)

Click to expand...

I had a chorizo and egg burrito for you. With lots of green chile and cheese of course.

So after some heavy research, it looks like the issue I mentioned with the DISH 50.0/52.0/54.x remotes where on the 50.0/52.0 remotes, the dedicated TV Power button or on the 54.x remotes where it is using the TV button on the side followed by Power works correctly on a Hopper 3 which runs Linux but not on a Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 which are Android TV (ATV) has to do with the Android TV software itself. In all instances, the remotes had always sent out a dual RF and Infrared signal when the TV Power signal is sent from the remote. The Hopper 3 without the Plus would ignore the incoming RF power packet signal which is identified as a TV-specific toggle event, and does not trigger a system-wide standby state. The Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 as Android TV devices initially worked the same way as well up to sometime in 2025 as there was the legacy pass-through mode in the original software versions used since the Hopper Plus/Joey 4/Wireless Joey 4 launch, the receiver's underlying software essentially ignored the secondary RF payload that the 50.0/52.0/54.x remotes blasted out whenever the TV Power signal was sent. The Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 recognized it was a TV-specific command and discarded the RF packet, letting the standalone IR signal do its job on the tv.

When the software for the Hopper Plus, Joey 4 and Wireless Joey 4 were updated in 2025 and newer versions of the software for those Android TV (ATV) devices, it overhauled how the receiver handles remote commands to tighter integrate the Android TV environment which resulted in the software starting to treat any RF power toggle payload as a global command. As the newer software verion(s) no longer filters out the concurrent RF blast from the 50.0/52.0/54.0 remotes, the moment one sends a TV Power signal from the remote, the Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 catches that unintended RF payloadand interpets it as a command to drop the system into standby.

The fix is really simple since the Android TV (ATV) software for the Hopper Plus, Joey 4 and Wireless Joey 4 just needs to be programmed to drop or ignore the specific RF power packets associated with the TV Power signal sequence.

The problem could also be at the remotes firmware as the remote's firmware has an engineering defect. When you try to turn off the TV, the remote's internal code mistakenly triggers its RF transmitter alongside its IR transmitter. It should only be firing the IR light blast. Because it forces a simultaneous broadcast, the remote's firmware is the original source of the problem.

The Hopper Plus, Joey 4 and Wireless Joey firmware has a filtering defect. Good software design dictating peripheral inputs should include "error handling"—rules that tell the system what to do with messy or unintended commands.
• The legacy Hopper 3 firmware has proper error handling; it sees the remote's rogue RF packet and safely ignores it.
• The Android TV firmware in the Hopper Plu, Joey 4 and Wireless lacks this filtering logic. It blindly accepts the rogue RF packet and misinterprets it as a legitimate signal to force the entire system into standby.

If the remote didn't have a firmware bug, it wouldn't send the phantom RF signal. If the Android TV (ATV) device being the Hopper 3 with Hopper Plus, Joey 4 and Wireless Joey 4 didn't have a firmware bug, it would cleanly ignore the signal just like the Hopper 3 does.

brittanygarden and Rick Durham

That's a lot of information to ingest. However, I don't have the Hopper Plus and my 54 remote is doing crazy things to the Hopper 3. Several times each evening when I press the skip forward button several times to advance through a commercial, it switches the receiver either onto live TV or into suspension. Other buttons will also cause this randomly, I haven't established any patterns I can describe. I use "recall" to go back to my recorded program in progress.

Needless to say, something in the newer Hopper 3 softwares has caused the remote functioning to ......................malfunction. Evidently, it applies to third party remotes as well as DISH's own remotes.

rvvaquero said:

That's a lot of information to ingest. However, I don't have the Hopper Plus and my 54 remote is doing crazy things to the Hopper 3. Several times each evening when I press the skip forward button several times to advance through a commercial, it switches the receiver either onto live TV or into suspension. Other buttons will also cause this randomly, I haven't established any patterns I can describe. I use "recall" to go back to my recorded program in progress.

Needless to say, something in the newer Hopper 3 softwares has caused the remote functioning to ......................malfunction. Evidently, it applies to third party remotes as well as DISH's own remotes.

Click to expand...

This is exactly the same issue I was having as I had the Hopper 3 and 54 remote without the Hopper Plus and the symptoms were virtually identical to yours.

We have had a corolary problem in this and the prior s/w. Using several different 40.0 remotes (yeah, we're old), when one pauses a live or recorded show it becomes a crap shoot whether it will step foreward the 30" as requested, jump to the end, or restart the episode. Tried the famous 60" reboot to no avail and have decided to live with it vs. a receiver swap risk.

I think there's a change to the "skip forward 30 seconds". With CBS that does not have auto-skip, if you stack up a bunch of 30 second forwards it seems to stop when the kangaroo signaling the end of the commercial break appears.

First 2 eps out and it's unsurprisingly great to watch Paul Bettany and James Spader work.

Watched the first episode and enjoyed it.

James Spader gets the best lines so far. I'm enjoying this series.

Finished the 2nd episode tonight. I'm really liking it so far.

Still hate weekly releases though, especially the way Disney and HBO do it waiting until 8pm to premiere it.

Apparently I'm not a big enough nerd since I did not read every Marvel Comic Book ever published. If I had, I might be comparing the comics' version of events compared to what's transpiring in "Visionquest". So, I am enjoying the series a lot, not weighed down by previous expectations, knowing only the Avengers MCU movies and the "Wandavision" / "Agatha All Along" TV series.

I found the Mr Know-it-All channel from his discussion about "Star Trek: Strange New Worlds" and he's been gleefully picking these episodes apart, referencing the Marvel comics from the 1939 on. Turns out A.I. has been around since before World War II, at least in the comics. (Robots before that, yes, yes.) This show is going back into the archives.

It may be the year to update my 13 to the 15.

BTW, iOS 26.1 is now out for iPhone, along with the OS 26.1 updates for all other supported Appley iDevices.

Bought a Motorola G Power 5G android phone as a spare and to use for some work stuff. Was tired of work stuff cluttering up my iPhone 16 Pro. Didn't take long to remember why I originally went to an iPhone. 4hrs doing updates to step up from Android 14 updates to Android 15 and latest updates for 15. Ads on the Play store above the app I searched for is something I don't really remember from the last android phone I had 13-14 yrs ago. Face ID on iphone has spoiled me too.

I just wanted a cheap phone mainly for work pictures or I would have got an 17 Pro and used my 16 for work stuff, but no need to spend that kind of money. I don't even have cellular service on the Motorola, just using it on WiFi and added my google voice number to it with the app.

Apple released their 2025 Holiday video. Friendly forest fauna find forgotten phone…

There's also a behind the scenes "Making of" video, too:

Foxbat said:

BTW, iOS 26.1 is now out for iPhone, along with the OS 26.1 updates for all other supported Appley iDevices.

Click to expand...

BTW, iOS 26.3 is now out for iPhone, along with the OS 26.3 updates for all other supported Appley iDevices.

Foxbat said:

It may be the year to update my 13 to the 15.

Click to expand...

Apple made me an offer I couldn't refuse. For whatever reason, they bumped up the Trade-in value of my iPhone 13, first to $180, and just recently to $195. So I took the Apple Cash from Apple card savings and the $195 trade-in and have a shiny new iPhone 17 nothing. The base 256 GB is more than enough for my needs.

Now I'm on the lookout for a leather case for it…

My iPhone 17 is now running iOS 27.2 (whatever happened to 27.1.x?) and it looks like all the other Apple devices that can are releasing 27.2 (looks like it came out Monday)