Social Feed

Big Bob
Last reply · posted in DISH Network Support Forum
We just got a new roof, and the installers had to remove our dishes. I have an appointment scheduled to reinstall the dishes on Tuesday. Unfortunately, I just found out that the Emmy Awards are being broadcast tomorrow. Recording them is an import thing to do in our house. So I have about 24 hours to come up with a solution

My setup is old. I have a 722k, a dish 500 and another dish with only 1 lnb, which I guess makes it a dish 300?
the LNB on the dish 300 says it is a dish pro. the installation had one 1 cable from the dish 300 to the dish 500, and 2 cables from the dish 500 to the 722k. the 500 was pointed at 110 and 119, and the 300 was at 121

I was able to access the dish 300 and disconnect it. The dish 500 is significantly harder to get to. I mounted it on a makeshift stand, put it out in the driveway, ran a single line from it back to my 722k, aligned it to 110 and was able to get a pretty good signal. I am able to watch any of the shows that are on 110, which includes our local Fox station, so we will be able to watch the Emmy Awards. Yea!

However, the program guide will not download. I currently can see about 2 hours out, then "No Info Available" for about a day and a half, then nothing. If I try to go past this, I get a dialog stating that the program information is outdated and offers to retrieve program information now. If I select yes, it will try for about 10-15 minutes, then stop and I still do not have a program guide.

No big deal, except that it seem I can not record without the program guide.

I have reset the 722k by unplugging it. I have run check switch a few times.
check switch reports that only port 2 on Satellite Input 1 is "OK",
It also states this is a DPP Twin w/Separator, so does that mean dish pro plus?

Still not program guide and therefore no recording and therefor I am in trouble :(

Questions
Is it even possible to get the complete program guide from only 110 or do I need to see 119 as well?
Or is the problem that I only have one cable run?
I really don't want to try to climb up on the roof, get the LNB that can see both 110 and 119 if I don't have to.

Thanks
5 Replies · 1610 views
Big Bob
So I dug around and found enough cable and barrel connectors to run another line. I did a check switch, and now it is reporting that both satellite inputs, 1 and 2 have only one port, they are on 110 and they are OK.
Of note, they are now reporting DP Dual. that is what I thought they would be.

Anyway, went through another round of downloading the guide, and this time it was successful. And I have verified that I can indeed record. No doghouse for me :)

Anyway, not sure if 2 lines were required, or somehow the check switch failed and reported the wrong type, or it just worked for some reason this time.
Thanks for playing along
:)
  • Like
Reactions: TheKrell
HipKat
So I dug around and found enough cable and barrel connectors to run another line. I did a check switch, and now it is reporting that both satellite inputs, 1 and 2 have only one port, they are on 110 and they are OK.
Of note, they are now reporting DP Dual. that is what I thought they would be.

Anyway, went through another round of downloading the guide, and this time it was successful. And I have verified that I can indeed record. No doghouse for me :)

Anyway, not sure if 2 lines were required, or somehow the check switch failed and reported the wrong type, or it just worked for some reason this time.
Thanks for playing along
:)
That is old school. the 121 is not used for residential anymore. The tech that comes out will be (Should be) updating your dish to a 1000.2 that hits 110, 119 and 129
pattykay
So I dug around and found enough cable and barrel connectors to run another line. I did a check switch, and now it is reporting that both satellite inputs, 1 and 2 have only one port, they are on 110 and they are OK.
Of note, they are now reporting DP Dual. that is what I thought they would be.

Anyway, went through another round of downloading the guide, and this time it was successful. And I have verified that I can indeed record. No doghouse for me :)

Anyway, not sure if 2 lines were required, or somehow the check switch failed and reported the wrong type, or it just worked for some reason this time.
Thanks for playing along
:)
Yes, with these dual-tuner receivers, it is always a good idea to connect the same satellite signal to both input ports on the back of the receiver. They do not seem to like it if there is only one port connected, or if there is a different satellite connected to each port. It may not have been absolutely necessary for two cable runs, but you would have needed to use a DP Separator (as the first check switch indicated) to connect the single cable to both input ports so that they could both see the same satellite signal. Since it is now working, it is probably best to just leave it as it is, and enjoy the Emmys. :)
Big Bob
That is old school. the 121 is not used for residential anymore. The tech that comes out will be (Should be) updating your dish to a 1000.2 that hits 110, 119 and 129
I bet the dish was pointed at 129, not 121. Guess I had it wrong in my head.
  • Like
Reactions: HipKat and pattykay
Big Bob
Yes, with these dual-tuner receivers, it is always a good idea to connect the same satellite signal to both input ports on the back of the receiver. They do not seem to like it if there is only one port connected, or if there is a different satellite connected to each port. It may not have been absolutely necessary for two cable runs, but you would have needed to use a DP Separator (as the first check switch indicated) to connect the single cable to both input ports so that they could both see the same satellite signal. Since it is now working, it is probably best to just leave it as it is, and enjoy the Emmys. :)
that is the plan
  • Like
Reactions: pattykay
TheForce
Supporting Founder Pub Member / Supporter
Last reply · posted in The Phone & Tablet Zone
It's time for my wife to get a new iphone as her iphone 12 is getting weak battery life test says 70% compared to when new. But it is beginning to show signs of screen freezing as well.
211 Replies · 15124 views
Foxbat
It may be the year to update my 13 to the 15.
Foxbat
BTW, iOS 26.1 is now out for iPhone, along with the OS 26.1 updates for all other supported Appley iDevices.
osu1991
Bought a Motorola G Power 5G android phone as a spare and to use for some work stuff. Was tired of work stuff cluttering up my iPhone 16 Pro. Didn't take long to remember why I originally went to an iPhone. 4hrs doing updates to step up from Android 14 updates to Android 15 and latest updates for 15. Ads on the Play store above the app I searched for is something I don't really remember from the last android phone I had 13-14 yrs ago. Face ID on iphone has spoiled me too.

I just wanted a cheap phone mainly for work pictures or I would have got an 17 Pro and used my 16 for work stuff, but no need to spend that kind of money. I don't even have cellular service on the Motorola, just using it on WiFi and added my google voice number to it with the app.
  • Like
Reactions: navychop
Foxbat
Apple released their 2025 Holiday video. Friendly forest fauna find forgotten phone…
​

There's also a behind the scenes "Making of" video, too:
​
Foxbat
BTW, iOS 26.1 is now out for iPhone, along with the OS 26.1 updates for all other supported Appley iDevices.
BTW, iOS 26.3 is now out for iPhone, along with the OS 26.3 updates for all other supported Appley iDevices.
1770953531617.png
Foxbat
It may be the year to update my 13 to the 15.
Apple made me an offer I couldn't refuse. For whatever reason, they bumped up the Trade-in value of my iPhone 13, first to $180, and just recently to $195. So I took the Apple Cash from Apple card savings and the $195 trade-in and have a shiny new iPhone 17 nothing. The base 256 GB is more than enough for my needs.

Now I'm on the lookout for a leather case for it…
  • Like
Reactions: osu1991
Foxbat
My iPhone 17 is now running iOS 27.2 (whatever happened to 27.1.x?) and it looks like all the other Apple devices that can are releasing 27.2 (looks like it came out Monday)
"MysteryMan"
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
523 Replies · 47943 views
EarDemon
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
WhiteBeard
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
  • Haha
Reactions: meStevo
EarDemon
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.

I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
harshness
I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows.
What is so fantabulous about the Windows UI? By many accounts, it has been going downhill since Windows 7.

There are Linux desktops that offer Windows or Mac UIs, yet you don't hear much chatter about them outside of questions about when the creators might get sued.
  • Like
Reactions: HipKat
EarDemon
What is so fantabulous about the Windows UI?
Because it's what I prefer. I know I've said this a few times, I use Open Shell to give me the cascading start menu a la WIN 95 and NT4.0. The only reason I went from Windows Vista to 7 back in the day was because of Classic Shell. I cannot stand anything other than the OG start menu from 30+ years ago. I'm using ExplorerPatcher to give me Windows 10 UI elements of the taskbar and right click context menus.

If you could take a look at how I set up Windows 95, you'd find many similarities to how I use 11.
  • Like
Reactions: cp2k
EarDemon
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.
harshness
Because it's what I prefer.
I hope you don't believe that makes it wonderful (especially when you're using workarounds for Microsoft's malfeasance).

I use LibreOffice as opposed to Microsoft office (even in Windows) because it's UI is like the Office of old, so I'm putting my money where my mouth is (in a manner of speaking). The ribbon was one of the worst ideas to come out Redmond.
HipKat
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.
I used to pin the C: drive to the Win Taskbar and it would open in cascading style
"MysteryMan"
2026-10 Preview Update Builds: 26300.9818 and 26200.9818 (KB5127936) has been released. Moderate time needed for those choosing to perform a manual download/install/restart. Quality improvements only. No new operating system features.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 3 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68645 Replies · 2679580 views
  • Like
Reactions: c-spand
harshness
Show and Tell - Al Wilson
sdfntx
On with the Show - The Rolling Stones
gms49ers
The Show Must Go On - Pink Floyd
  • Love
Reactions: dishstaller
Bobby
If Love Must Go - Dobie Gray
FTA4PA
Drift Away - Dobie Gray
  • Like
Reactions: gms49ers
Van
Van
Last reply · posted in What's Cooking?
Who says dinner or lunch has to be the only good meals of the day?

Honey butter grits with scrambled eggs and grilled boneless pork ribs on flakey biscuits washed down with cranberry juice.
6633 Replies · 380102 views
dfergie
Dos cackleberrys over easy on top of 2 corned beef hash patties fried in skillet... Chocolate milk.
  • Like
  • Love
Reactions: TRG and Bobby
TRG
TRG
Cold morning today, only 32 degrees. Fired up the oven and made cinnamon rolls (from a tube) and a pot of coffee.
  • Like
Reactions: dfergie
TRG
TRG
2 egg burrito with bacon and a side of hashbrowns. Coffee.

1645.webp
TRG
TRG
Breakfast Quesadillas. Grilled flour tortilla filled with scrambled eggs, hash browns, chopped green chile, cheddar & Jack cheese and bacon. Coffee.

q.webp
Bobby
Taco omelette. 3 eggs, taco meat from yesterday, diced green chilis, cheddar cheese, chopped red onion, avocado, black olives, chopped tomato, La Victoria Salsa Brava.

This one was really, really good!