Social Feed

Stuart Sweet
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
· posted in The Solid Signal Blog
Even though DIRECTV's been on a path to transition away from SD for 7 years, there's still a lot of confusion about how it's going to be done and what it means to people out there. A lot of our RV and marine customers depend on SD channels for various reasons. While losing standard definition might not be a big deal for most customers, it has the potential to make a real difference to mobile and marine folks. So, sit back and let's talk about what's actually going on in DIRECTV-land.

First, let's look back


DIRECTV rolled out its first HD channels around 2005. So we're talking about 20 years since all this started. The US broadcasting system moved to all-digital in 2009, about 15 years ago. Yet, DIRECTV continued to provide standard definition duplicates of nearly every HD channel until about 2021.

Why has DIRECTV kept this up? In a lot of ways, it's sort of "because they can" or "because there's no harm in it." The primary satellite at DIRECTV's 101 location was designed for standard definition and wasn't really well suited to HD anyway, so using it for that purpose made sense. DIRECTV had plenty of standard definition encoders in their broadcast centers, so they had time to figure out how to move forward.

Back in 2016, DIRECTV announced that they would be retiring its aging satellite at the 119 location. This would mean turning off hundreds of standard definition channels hosted on that satellite. The original goal for that was 2019, but it was pushed forward into 2020. And then… well we all know what happened in 2020 so that plan was put on hold.

When DIRECTV's T16 satellite launched in 2019, a major piece of the puzzle fell into place. This new, advanced satellite was built with HD and 4K in mind and its position at the 101 satellite location makes it possible to move forward. DIRECTV started actively turning off standard definition service in local markets in late 2021, and they've been really moving quickly since.

There's a lot of misunderstanding out there

DIRECTV's 101 satellite location is not going dark.


This was a common trope for several years, based on the age of the satellites at that location and their use for standard definition. However, with T16, the 101 location will still be there.

Mobile and marine dishes are not becoming obsolete.


There are a lot of satellite dishes for mobile and marine that only receive signals on the Ku band. Most of DIRECTV's HD programs are on the 99 and 103 satellites, which don't broadcast on the Ku band. That's led people to think that when standard definition goes away, their satellite dishes will stop working.

That's absolutely not true. As standard-definition channels on the 101 satellite are turned off, it will make more space on that satellite for HD programs. Right now there are 5 HD channels at the 101 location, and it's expected that after all SD programs are turned off, there could be dozens more. Turning off SD channels will actually mean mobile and marine dishes become more valuable.

As long as your receiver was made after 2009, you have what you need.


In the last five years, DIRECTV has helped customers trade in thousands and thousands of older receivers. These have all been replaced with newer receivers that are HD-capable. If you're able to look at the model number on your receiver (there's a green sticker on it somewhere) if that model starts with an H, you're all set. If it starts with a D or an R, you'll want to trade up.

What this will all look like in the future


First off I'll say that the roadmap isn't public. I'm guessing here.

I expect all standard-definition local channels to leave DIRECTV by the end of 2024. There will be some national standard-definition channels that will need to remain for a while to satisfy old contracts. This move should make it possible to put a bunch of HD channels on the 101 satellite and that's a win for everyone.

It does mean that some of our marine and mobile customers will lose access to local channels, though. Luckily Signal Connect can help. We have innovative ways to help you get the programming you want no matter where you are in the country. All you need to do is call us at 888-233-7563. We're here during East Coast hours. If it's after hours, fill out the form below. We'll get right back to you!


The post DIRECTV losing SD channels: trying to make sense of it all appeared first on The Solid Signal Blog.

Continue reading...
0 Replies · 383 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68657 Replies · 2680157 views
  • Like
Reactions: c-spand
sdfntx
I Care About Detroit - Smokey Robinson & the Miracles
dishstaller
I Wanna Talk About Me - Toby Keith
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
gms49ers
It's Easy - Boston
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 37 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 276 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 45 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 49 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.