Social Feed

Stuart Sweet
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
Last reply · posted in The Solid Signal Blog
Let me say this part up front. Solid Signal, the company that underwrites this blog, is a DIRECTV National Accounts dealer and a DISH Premier Local Retailer. Those distinctions might not mean a lot to regular folks, I get it. But it means Solid Signal is in the top, top tier in both organizations. And so, when people ask me which satellite service I like better, I tell them it's like trying to answer which of your children you like better. Both services have evolved to the point where they're excellent and it's just a matter of the details. One service will have something you really want; the other won't. And that's how you choose.

The best satellite service for your RV


Choosing a satellite service for your RV really depends on a lot of factors. Do you like what you have? Are you able to add an extra receiver to your current account? (DIRECTV doesn't let you do this in most installs done after 2017.) Does one have a channel that the other doesn't? Those are just some of the reasons.

For others though it gets a lot more technical. DIRECTV lets you get practically all the channels by pointing at one satellite, but most of them are standard definition. If you have a small TV in your RV, you won't notice. DISH gives you all the HD channels, but half of them are on a second satellite. That means channel changes can take a long time sometimes.

DIRECTV lets you suspend service once a year, so you can change your service address and get local channels in the place your RV is likely to go. DISH lets you change your local area a lot more frequently, but only with their more-expensive no-contract plan.

It really is up to you. But let's say you had one service provider and want to use the other. Does that mean you'll need a new dish? Let's dive in.

Portable (gumdrop-shaped) satellite dishes

KOP4800_0.jpg


It's very common for people to get portable satellite systems like the KING One Pro you see above this paragraph. They're fairly inexpensive and setup is incredibly easy. Just put it on a level service, connect it to power and a satellite receiver and you're set.

In some cases, you can use the same gumdrop-shaped dish for DISH and DIRECTV. If you have DIRECTV, you can usually get a DISH Wally to work with it. However, if your satellite dish has the DISH logo on it, it will not work with DIRECTV. DIRECTV receivers don't natively understand the portable dishes so more expensive, DIRECTV-compatible systems have extra electronics built in. DISH-only satellite antennas don't have those, so they're typically less expensive.

Roof-mounted satellite dishes

KPT1000_1-edited.webp


If the satellite dish on the top of your RV looks something like this, it generally won't work with a different provider. I'm talking about the KING Phoenix or the Winegard Trav'ler. These devices fold down for travel, and when they are unfolded, they generally resemble the satellite dishes you have at home.

There's a good reason for that. These devices use a lot of the same parts as home-based satellite dishes. That means they're not compatible with each other, just like home-based DIRECTV and DISH devices won't work with each other. Everything about them is customized for the specific satellite provider.

In-motion dishes

RT2000T_0-1024x1024.png


There's a third option here. I'm talking about permanently-mounted gumdrops like the Winegard RoadTrip T4. These systems aren't terribly different from the other gumdrop-type dishes you'll see, but they have internal electronics that let them stay aimed while you're moving.

With almost no exceptions, these devices will work with DIRECTV or DISH. There are generally some sort of switches in them to let you set them for DIRECTV, DISH, or even BELL if you're in Canada.

How can you know for sure?


This article just gives you the basics. If you really want to know which dishes will let you switch providers without buying a whole new system, you want to talk to the experts. Call us at Signal Connect. We have full tech support available for pretty much all of the RV satellite systems, even the ones we don't sell. There's a reason we're the largest RV satellite activation specialist in the country: we know what we're talking about.

Find out more. Call us during East Coast business hours at 888-233-7563. If it's after East Coast business hours, fill out the form below. We'll get right back to you!


The post Do you need to get a different RV satellite dish if you change providers? appeared first on The Solid Signal Blog.

Continue reading...
1 Replies · 354 views
harshness
If you have DIRECTV, you can usually get a DISH Wally to work with it.
This statement is confusing at best. I suggest using the term "a DIRECTV dome" in place of DIRECTV.

The Phoenix and Trav'ler dishes aren't interchangeable between services.

In all discussions of automatic mobile dishes, it should be made absolutely clear that only the DIRECTV versions of the Phoenix and Trav'ler dishes will deliver the full slate of DIRECTV programming.
  • Like
Reactions: Tecnicoloco
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68657 Replies · 2680157 views
  • Like
Reactions: c-spand
sdfntx
I Care About Detroit - Smokey Robinson & the Miracles
dishstaller
I Wanna Talk About Me - Toby Keith
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
gms49ers
It's Easy - Boston
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 37 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 276 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 45 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 49 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.