Social Feed

Stuart Sweet
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
· posted in The Solid Signal Blog
I've been talking for years about the proposed next-generation TV standard. I think this is a critical year for it, and I'll even go further and say that unless we really see something interesting happen with ATSC 3.0 (or NextGen TV as they would like you to call it) the whole thing will start to fade away. Maybe that sounds negative, but I actually mean it in a positive way. Let me explain.

The big roadblock is largely gone


It was way back in late 2017 when the FCC first authorized test broadcasts of ATSC 3.0. It took about two years to build out the basic technology and infrastructure, and by the time early 2020 rolled around we all had our focus on something else. That took another two years or so to shake out as you may remember. (Or, if you've chosen to forget.)

However, there's no global reason stopping ATSC 3.0 from going forward. A lot of major markets have started test ATSC 3.0 broadcasts. There are only two smaller roadblocks. One might be getting better, and the other just might not be.

Roadblock #1: Affordable hardware


There still isn't any affordable hardware that allows a current TV to receive these new broadcasts. Only the top-tier TVs have ATSC 3.0 tuners, so every other TV will need some sort of converter box to receive those new broadcasts. One company has announced a low-priced box for later this year, with much fanfare. I personally hope they deliver. But, it's going to take more than one company producing one box to meet demand. Plus, I think the box has to be extremely cheap. The last time we did this, the boxes were essentially free as they were subsidized by the federal government. I find that to be unlikely today.

Roadblock #2: The FCC


The original order allowing for test broadcasts was set to expire this year. It was believed that 6 years would be enough time to see if ATSC 3.0 was worth the effort. Let's say that we're a lot further behind than anyone thought we would be at this point. The FCC itself has raised some really big questions about whether or not it's in the public's best interest to continue testing. For example, whether anyone will be able to afford the technology, and what it really brings to the table. (More on that last point in a minute.)

The FCC has essentially extended the original order by five years. This is good, in that it means ATSC 3.0 isn't dead in the water. On the other hand, the FCC missed out on its chance to shape the future of the technology. They're just letting it meander around the same as it has for the last five years.

It's worth pointing out that the FCC is now in its third year without a full set of commissioners. Congress took so long to try to confirm the administration's last pick that the person withdrew. So now it has to start all over again. Without a full set of five commissioners, only the simplest and most benign rules have been able to be set. With two Democrats and two Republicans sitting in those chairs, it seems like no one will be able to do anything.

The real question of what you get with ATSC 3.0


The promise of ATSC 3.0, when you look at it from a customer point of view, is just better TV. You'll get 4K over-the-air, if it's available. You'll be able to watch TV in a moving vehicle. Your smart TV can get internet-enabled features along with your TV.

But folks I've said it before. The real reason that the TV industry is pushing for ATSC 3.0 is because it allows them to track your viewing habits and serve ads tailored to you. This in itself isn't a big deal. Live TV streaming services, pay-TV companies, and virtually every web site on the internet do this. I just find it a little suspicious that no one talks about this as an important goal.

I mean, if they said, "we need ATSC 3.0 because without advertising dollars these local stations will go out of business" then I think people would accept that. If they said "without the ability to tailor ads to your home we're just not competitive," people would understand. As I said, you get personalized ads on every web site you visit. So it makes me wonder why the broadcasting industry is being so coy about it. Why not just own up to it?

My prediction for 2024


In the end it's good that the FCC reauthorized testing on ATSC 3.0. However, I don't think that we'll see that affordable converter box by the end of the year. (Or, if it launches, it will be super buggy.) All that means is that we won't be any close to actually adopting this standard, and I think that means we won't see full adoption until 2029 at the earliest. Given current trends in cord-cutting, it's really hard to know what the landscape for local broadcasting will be at that point.

I do think that without a better advertising strategy, some of these stations will just fold. Broadcasting is an expensive business. Right now broadcasters get the bulk of their money from retransmission fees. In other words, pay TV companies give them money for carriage. But, if pay TV companies shrink, the amount of money going to local broadcasters shrinks. Again, it's hard to know what the end result is going to be in six years.

I honestly do hope that something really meaningful happens this year. I just wouldn't count on it.

The post 2023 is a make-or-break year for ATSC 3.0 appeared first on The Solid Signal Blog.

Continue reading...
0 Replies · 240 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68658 Replies · 2680179 views
  • Like
Reactions: c-spand
dishstaller
I Wanna Talk About Me - Toby Keith
  • Like
Reactions: RaiderPower
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
  • Like
Reactions: RaiderPower
gms49ers
It's Easy - Boston
RaiderPower
Take It Easy On Me - Little River Band
  • Like
Reactions: dishstaller
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 43 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 282 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 50 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 53 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.