Social Feed

Stuart Sweet
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
· posted in The Solid Signal Blog
First, let me say this. DIRECTV DVRs are incredibly reliable. Consider for a minute that they are computers, as complex as any computer you use in any other context. They sit in unventilated spaces and gather dust. Still, they work for years and years and years. I know of people who have 15-year-old DVRs. I wouldn't recommend it, because they're dog slow, but they do work.

But, it's going to happen at some point that a DVR stops working. Sometimes they tuner chips burn out, sometimes it's the power supply. Sometimes the hard drive sticks and that's the end of that. When that happens, you'll call Solid Signal at 888-233-7563 for a replacement. But when you do that, you're going to ask the same question that most people ask.

How can I watch the stuff I recorded on my DVR?


In the past, the answer would have been simple: you can't. You can't transfer hard drives from one DVR to another. If you pull a hard drive out (and you shouldn't) you won't be able to read it with your PC. Even if you have a Linux box and you can see the files, they won't play for you. It's all part of DIRECTV's advanced copy protection scheme. That scheme is there because the content providers, the channels you get, demand that it be there. It's in the contract. You see, someone at Disney lives in abject terror that you'll record something off ESPN and sell it on a streetcorner. That fear doesn't really hold up today, but whatever. Point is, you can't watch anything from your old DVR.

However, there is an option you can use today. It wasn't available until recently.

The new solution


If your DVR has been networked and connected to the internet, then you can generally use the DIRECTV app for phones, tablets, or even streaming boxes, to see the contents of your playlist. If those programs are available in DIRECTV's on-demand library, you'll be able to watch them. In some cases you might have to watch the commercials rather than skip them. But, that's not such a big burden compared to losing that content.

3-1-473x1024.jpg


This screen capture from an iPhone shows how you do it. If you go to "My Library" and choose "DVR Recordings" you'll see the recordings from your DVR the last time it uploaded that information to the internet. If you tap the button that says "Streamable" you'll only see the recordings which can be streamed.

Using this technique, you can watch programming that you recorded before something happened to your DVR.

However, you'll need to work fast. Once you get your new DVR and connect it, you'll lose access to older recordings when the new DVR uploads its (empty) playlist to the cloud. You can extend the window somewhat by making sure the DVR isn't connected to the internet, but then of course you'll lose out on other features that require that kind of connection.

You can use your phone, your tablet, or download the free DIRECTV App for Roku, Apple TV, or Fire OS. Sign in with the same credentials you use at DIRECTV.com to manage your account, and you'll get access to this feature along with the ability to watch hundreds of channels of live TV.

What about older recordings I've archived?


People who have DIRECTV DVRs tend to use them to hold on to old programs, to full seasons of TV to be watched later, or just to watch movies that showed up as part of a free preview. There's nothing wrong with this practice, but unfortunately those programs are tied to the DVR and won't transfer over to a new DVR. Most of the time, DIRECTV's cloud recordings only go back about three months, so if you recorded something before that it won't be accessible either.

If there's a recording that's really important to you, you should take steps to take it off your DVR. DIRECTV gives you no real ability to do this. The copy protection built into HDMI cables also makes it fairly hard to do. You can use a device like this one but depending on the content it may not be viewable due to copy protection.

Now, this blog never advocates anything illegal or unethical, so the most I'll say is that if you spend enough time on the internet you'll be able to figure out how to subvert HDMI copy protection. At this point it's almost comically easy to do. I just urge you to use this power wisely, and, well, not sell copies of ESPN programming on streetcorners.

With the right setup you should be able to get HD copies of the content you recorded, and as long as they are maintained on your personal computers, never uploaded to the cloud, and used strictly for your own use, you're not breaking any laws that I know of.


The post My DIRECTV DVR just died. Can I transfer or view my recordings? appeared first on The Solid Signal Blog.

Continue reading...
0 Replies · 322 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68657 Replies · 2680145 views
  • Like
Reactions: c-spand
sdfntx
I Care About Detroit - Smokey Robinson & the Miracles
dishstaller
I Wanna Talk About Me - Toby Keith
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
gms49ers
It's Easy - Boston
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 37 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 274 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 44 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 49 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.