Social Feed

Stuart Sweet
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
· posted in The Solid Signal Blog
Using an antenna can save you thousands of dollars in cable and satellite fees, but it's hard to choose the right one. Antennas are still a bit more of an art than a science, and it can be hard to know which antenna you need. If you search some popular online stores, you'll find hundreds of them in various shapes and sizes. It's not always easy to know which one will be right for you.

Here's the easiest way


The easiest way is simply to ask. Call us at Solid Signal at 888-233-7563. We're here during East Coast business hours. Our team of experts will take the information you give us and create a custom recommendation from our wide selection of antennas. That recommendation will even include the accessories you might need. We have antennas that will work indoors and outdoors, and we will help you find the best choice. Our services are provided for free, with no obligation.

For the DIYer


If you would rather do the research yourself, there are web sites that will help you figure out the right kind of antenna for your area. I personally prefer antennaweb.org. AntennaWeb is provided by the Consumer Electronics Association (Solid Signal is a member) and is better for people who are just beginning to enjoy antenna television.

Screenshot-2023-06-30-071525-1024x387.png


The main screen asks you the basic questions: your zip code, address and the height of the antenna. Enter this information and click Go.

Screenshot-2023-06-30-071700-772x1024.png


After a moment you'll see a map of your area along with a list of stations. You'll also see a notification of what kind of antenna you need, by color code. You'll even see if any of those channels broadcast a NextGen TV signal, which is the proposed new signal tech that could roll out in 2027.

Before we continue, a few words

antennaweb3d.png


Over the air technology has been around a long time. Digital TV itself has been around for about 15 years. That's enough time for a lot of information to get stale. So, there are two things to clear up here.

The first is that in the past (and in some other, older articles) I recommended a site called TVFool. That site once was a premier destination for DIYers, but has sadly stopped being updated. The coverage maps it has are now so out of date that they're not useful. Sadly I'd avoid it now.

The second concerns the antenna color codes. The antenna color code system was created about 20 years ago to make it easy for customers to understand what antenna they need. It's still important to know what kind of antenna you need, but today most antennas don't have the codes on them, and most web site listings don't use them.

How to read the AntennaWeb report


First, look to see if any of the stations you want to get are listed as VHF stations. If so, you'll need a VHF antenna. Many people think that all digital TV is UHF but that isn't true. You'll want to look specifically at the "RF Channel." This is the actual channel that is used for broadcasting. The channel number you see on the screen can be different. If that number is between 2 and 6, you'll need a VHF-Low antenna like the HD8200XL. If it's between 7 and 13, you'll need an antenna that receives VHF-High stations. All TV antennas receive UHF stations.

When you know what antenna you need, click here to go to our antennas page. The colored codes are here as well, and you can click on the code to refine your search. Once you've picked an antenna, check out our line of antenna accessories. Unless you're replacing an existing antenna you'll probably need a mast, and even if you're replacing an older antenna you'll probably need new cable.

Using an Indoor Antenna


Indoor antennas are easier to aim as needed and are well suited for picking up signals up to 30 miles away. Look through the list to see if all your channels are within 30 miles; if they are, you can use an indoor antenna in many cases. Indoor antennas save you the time and trouble of mounting and they can be so small that you hardly notice them. Click here for our selection of indoor antennas.

Confused? Need advice? Your friends at Solid Signal are never more than a click or a phone call away! If you need help, call us at 888-233-7563, or simply fill out the form below.


The post Here's how to find the right antenna for you! appeared first on The Solid Signal Blog.

Continue reading...
0 Replies · 302 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68658 Replies · 2680198 views
  • Like
Reactions: c-spand
dishstaller
I Wanna Talk About Me - Toby Keith
  • Like
Reactions: RaiderPower
Bobby
98.6 - Keith
harshness
I'm Easy - Keith Carridine
  • Like
Reactions: RaiderPower
gms49ers
It's Easy - Boston
RaiderPower
Take It Easy On Me - Little River Band
  • Like
Reactions: dishstaller
R
Last reply · posted in Computers and Gadgets
Lately my eight year old Dell laptop has been shutting off even when I have a full battery. I have had to keep it plugged up all the time to keep this from happening. Any idea what is causing this? I replaced the battery about three years ago.
2 Replies · 44 views
arlo
A recalibration might be needed. Even if it shows full, the individual cells may have become unbalaced. And the BMS chip in the battery reports false information to the pc.
Try this. Start it up in the bios/uefi and leave it there until the battery dies and it shuts off.
It might just keep running longer than in Windows. Or run for a short while and shut off.
If it's the first case. Probably just needs a balancing. If the latter, the pack might just be dead.
Not throwing stones but perhaps just a cheaply constructed battery with substandard cells. Could be.

Patience. Keep restarting it in bios/uefi until it won't fire up anymore.
Then plug the charger in and let it complete a full charge. And see what happens. If it's better.
Do the same thing one more time. Run it until it dies dead-dead. Then just let it charge, pc shut off.
When charged, it might be better. It might not be.

There are bench jigs that read the actual BMS and override it to let a tech manually monitor and charge the separate packs. They can also reset any "time bombs" in it that cause an otherwise good pack to show bad.
Maybe Santa will be good to me some year.

You might just need a new battery. Maybe the PC power management chip is going. A Dell common thing.
Leaving a laptop plugged in with a full battery is known to reduce the life. Asus for one recommends that you don't leave the charger plugged in all of the time even when shut down. And setting Windows to charge the battery to 85% instead of 100% increases life.
That's all I got.
dishstaller
That's all I got.
That was quite enough....I definitely learned something from your post. Thanks
TRG
TRG
Pub Member / Supporter
Last reply · posted in Computers and Gadgets
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
5 Replies · 283 views
b4pjoe
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
If you can't get into the router to reserve an IP address just don't use DHCP on the device that needs connected and assign it to a specific IP address in the network settings.
  • Like
Reactions: harshness
HipKat
I set up a music server for my brother a few years ago. It's basically a small headless computer but it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
They are not. Your best bet is to set up a third-party router, attached to the Starlink for your server, that you can get into, like a Linksys, etc
  • Like
Reactions: Foxbat
Foxbat
…it needs to have a DHCP IP address reserved for it in the router settings. This was easy to do in his DSL router. He's switching to Starlink now and I was wondering if these setting are easily accessible in the Starlink router. I'm pretty sure he will be getting the latest V5 router.
The Starlink V5 Install Kit I just got comes with the Mini Router. It is pretty limited in what it can do. For example, it can provide only one IP subnet at a time, no Guest Network, but it does support the pass-thru to a third-party Router. You can also split the Wi-Fi into separate 5 GHz & 2.4 GHz SSIDs to help some IoT devices that don't support 5 GHz bands to work.

The larger Starlink Router that still comes with the V4 Kit does support a Guest Network with separate IPv4 Subnet, but it's $120 from Starlink. And it still won't do DHCP Reservations.
harshness
If you can restrict the DHCP address space to assign addresses to one end of the subnet (i.e. x.x.x.50+), you can manually assign the IP address on pretty much any operating system. This is a default behavior on several popular routers. As the Router Mini only supports 235 devices, I expect that's already done.

Another option is to use a router that supports PoE to power the antenna. This article discusses that option (under PoE Power heading):

  • Like
Reactions: Foxbat
Foxbat
Now that I've had the v5 kit with the Mini Router, it's not as bad as I first thought. Yes, no DHCP reservations, but you can set up multiple SSIDs that have separate IPv4 subnets, and like the big brother, you can select from 192.168.x.0/24 or 10.x.0.0/16 (where "x" is 1-4).

You can also split a subnet and have different SSIDs for the 5 GHz and 2.4 GHz channels to handle some IoT devices. I haven't discovered what subnet the 2nd NIC on the router assigns, I'm guessing it's the first subnet.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
2 Replies · 50 views
dishstaller
Sorry for posting the wrong link. Just corrected it.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

2 Replies · 54 views
  • Sad
Reactions: Jimbo
Jimbo
Terrible tragedy. You would think that they would have safe guards in place that would prevent something like this from happening. I guess if you are going to ride in a passenger train it might be best to get a car near the rear.

They will have to look at the switching sections to determine WHY 2 trains were on the same track ... at the same time.
dishstaller
Thought this article might be of interest to some of you who might travel via train.