Social Feed

Main Feed My Feed
O
OswaldFTA
Last reply · posted in FTA Receiver / Equipment Support

OTHER  STAB HH-120 motor maintenance

Happy New Year!!!!

I recently got a used Stab HH-120 motor that is at least 10 years old (according to the previous owner) and I would like to remove the old grease from the gears and replaced with a fresh one. Since Stab is out of business and cannot be contacted anymore, what type of grease is recommended for this motor? Any tip for opening the motor and doing this operation?
Read more
17 Replies · 3034 views
Load Replies (17) Reply Legacy View
A
a33
OK, point taken.

For my car, they also recommend refreshing oil every year, or 15,000 km or so. I always do it +10%, as I think this is overly precautious.
I did lubricate my hoover motor recently though, as the sound became harsh. It might be over 20 years old, though.
It's always the question which maintenance to do preventive, and which only when the need arises (but you might be slightly too late). And to keep listening, to the sound of the moving parts, I think.

According to your standards, it is a miracle that my motor still functions...?
But maybe that is because I live in a rather mild climate, and use my motor not very often.

Still, when the motor is dismounted anyway, it's a good moment to regrease!

Greetz,
A33
Read more
Reply
O
OswaldFTA
a33 said:
OK, point taken.

For my car, they also recommend refreshing oil every year, or 15,000 km or so. I always do it +10%, as I think this is overly precautious.
I did lubricate my hoover motor recently though, as the sound became harsh. It might be over 20 years old, though.
It's always the question which maintenance to do preventive, and which only when the need arises (but you might be slightly too late). And to keep listening, to the sound of the moving parts, I think.

According to your standards, it is a miracle that my motor still functions...?
But maybe that is because I live in a rather mild climate, and use my motor not very often.

Still, when the motor is dismounted anyway, it's a good moment to regrease!

Greetz,
A33
Click to expand...
Your motor still works, that is a reality, what we don't know is the current status of the gears (teeth involute profile) compared with the original one. In that equation, a very important factor is the % of use of the motor. If the use is very low, then the life of the gears is extended. But again, regarding the grease, even if the motor is not used so often, it degrades and then there is no separation between gear mating surfaces, so wear occurs.
Read more
Reply
arlo
arlo
Hey. It's almost a no-brainer. If you're willing and able and have the skills. And want to prolong the life and save some money in the process. Go for it. Modern synthetics are superior to dynosaur lubes. The oil doesn't leave the base and just a clump of wax is left behind. Silicone grease may be okay for nylon, delrin, etc. gears. Unless specifically stated it's for lubrication purposes. An engineered synthetic lube will surpass.
Two schools of thought. Run 'er till she pukes. Or perform maintenance and make it last a long time. Especialy in this day of disposable stuff.
Read more
Reply
  • Like
Reactions: jorgek and Cham
jorgek
jorgek
Synthetic lubes are superior. That why all cars today use syn oil. I use syn oil in the lawn mower as the snow thrower.
Read more
Reply
O
OswaldFTA
jorgek said:
Synthetic lubes are superior. That why all cars today use syn oil. I use syn oil in the lawn mower as the snow thrower.
Click to expand...
For the records. After comparing several available greases and calculating the required oil kinematic viscosity for the size and speed of the gears inside the STAB HH-120 motor I purchased this grease:

Lubriplate® LTR-2

The most important characteristics:

Base - Lithium complex

Additives - Contains an Advanced, High Performance, Zinc Free Anti-Wear Additive Package.

High oil kinematic viscosity at 40C - 460 cSt (Good metal to metal separation)

High penetration (NLGI) - 2 (Low flowability, soo high tendency to keep attached to the gears)

Corrosion (ASTM D-130) - 3 hours 1a (No problem with bronze gears)

Motion industries sells 13.5 oz. Cartridge
Read more
Reply
  • Like
Reactions: jorgek and FTA4PA
View all replies (17)
Scott Greczkowski
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
Read more
68526 Replies · 2672549 views
Load Replies (68526) Reply Legacy View
  • Like
Reactions: c-spand
harshness
harshness
Delta Dawn - Tanya Tucker
Read more
Reply
  • Like
  • Love
Reactions: long_time_Dish, sdfntx, dishstaller and 1 other person
dishstaller
dishstaller
Can't You See - Marshall Tucker Band
Read more
Reply
  • Like
Reactions: long_time_Dish and sdfntx
sdfntx
sdfntx
See You in September - The Happenings
Read more
Reply
long_time_Dish
long_time_Dish
You Look Like You Love Me - Ella Langley
Read more
Reply
  • Like
Reactions: dishstaller
dishstaller
dishstaller
See Me Feel Me - The Who
Read more
Reply
View all replies (68526)
Peter Parker
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum

DISH Hopper 3 Software Version 713 Is Out

No idea what improvements might be involved.
Read more
19 Replies · 785 views
Load Replies (19) Reply Legacy View
  • Like
Reactions: LQQK and reubenray
bookworm370
bookworm370
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
Read more
Reply
  • Like
Reactions: charlesrshell
N
naptime
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
Read more
Reply
  • Like
Reactions: charlesrshell
R
reubenray
bookworm370 said:
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
Click to expand...
My wife mentioned that her remote is acting strange this morning. She hit FF and it went to 15x FF.
Read more
Reply
  • Like
Reactions: charlesrshell
Bobby
Bobby
naptime said:
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
Click to expand...
This has been an ongoing issue. A fix is coming, probably in the next software version.
Read more
Reply
  • Like
Reactions: naptime and charlesrshell
dishstaller
dishstaller
reubenray said:
My wife mentioned that her remote is acting strange this morning.
Click to expand...
Had a customer call recently saying their remote was really acting up, some buttons no longer functioned. Told them to reboot the Hopper....problem fixed.
Wife bought me a t-shirt that has "have you tried turning it off and on again?"

Read more
Reply
  • Like
Reactions: Foxbat and charlesrshell
cpdretired
cpdretired
dishstaller said:
Had a customer call recently saying their remote was really acting up, some buttons no longer functioned. Told them to reboot the Hopper....problem fixed.
Wife bought me a t-shirt that has "have you tried turning it off and on again?"

Click to expand...
Works every time. My wife needs one.
Read more
Reply
  • Like
Reactions: dishstaller, charlesrshell and Foxbat
Foxbat
Foxbat
dishstaller said:
Wife bought me a t-shirt that has "have you tried turning it off and on again?"
Click to expand...
Here's the one I need:
1792365258110.webp
Read more
Reply
  • Love
  • Like
Reactions: dishstaller, charlesrshell, long_time_Dish and 1 other person
dishstaller
dishstaller
Foxbat said:
Here's the one I need:
Click to expand...
Just ordered one....that's great.
Read more
Reply
  • Like
Reactions: charlesrshell
View all replies (19)
dfergie
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Chit Chat Club

Gas Price Info With National Gas Temperature Map

Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

Read more
5552 Replies · 460595 views
Load Replies (5552) Reply Legacy View
Bobby
Bobby
Regular$5.999​
Premium$6.399​
Diesel$7.999​
at Costco, Rohnert Park.​
Read more
Reply
  • Like
Reactions: harshness
harshness
harshness
I wonder if California is getting into the Winter formula.
Read more
Reply
dishstaller
dishstaller
Bobby said:
Regular$5.999​
Premium$6.399​
Click to expand...
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

Last night it was about $4.17 gas, $6,19 diesel.
Read more
Reply
harshness
harshness
dishstaller said:
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.
Click to expand...
On the West Coast, a 40-cent differential is common. It used to be 30 cents before the prices rose above $3.

A "full dollar more" sounds like it may be boat gas (non-alcoholic), which is a whole different discussion.
Read more
Reply
  • Like
Reactions: Foxbat
Foxbat
Foxbat
Here in Indiana, the difference between Regular and Premium is usually a dollar, but some charge even more:
1792374072446.webp
Read more
Reply
  • Like
Reactions: dishstaller
dishstaller
dishstaller
harshness said:
A "full dollar more" sounds like it may be boat gas (non-alcoholic),
Click to expand...
Both non-ethanol and prem run about the same....buck more. When we were up in TN it was a buck more up there as well.
Read more
Reply
View all replies (5552)
jokeworm
jokeworm
Last reply · posted in What's Cooking?

What's for dinner ?

Ok, I'm bored .... actually - to be more precise - I'm bored of eating the same rotation of 9 or 10 meals that are currently my "go-to" meals. My wife works the long hours - I work from home as and when i feel like it ... which means i generally do most of the cooking ... and so by default - i also make out the shopping list ...

We cook at home 5 or even 6 nights a week - but we always seem to fall back on the same old tried and tested "quick and easy but tastes ok" meals. Week in week out.

Pot Roast - mash and Peas.
Spaghetti
Chicken Pasta in cheese sauce.
Curry & rice
(these are some of mine)

Now it's not that I'm not adventurous in the kitchen ... I'll try anything once or twice ... but we all do it. Unless your name is Martha Stewart or Rachel Ray .. we all eventually fall back on our 8-10 favorite "meals"

So i thought - if we shared some of our own go-to meals with each other ... we might be able to add a few "new" ones to our own arsenal of meals.

So again - I ask you ...

What's for dinner tonight ?

Please give me something new to add to my rotation ... its our weekly shop tomorrow - so i want to pull together a few idea's and try and eat a meal each day next week that I've never had before .. or at least something that is not on my current "go-to" meal plan.

What meal do you always seem to fall back on in your house ? Maybe its something that I've never tried or not had in a while. I need inspiration !! I've got a blank shopping list in front of me - and nothing sounds good .. HELP !
Read more
4332 Replies · 331144 views
Load Replies (4332) Reply Legacy View
TRG
TRG
Beef and vegetable stew with buttermilk biscuits. Water.
It seemed appropriate on an unusually cold and wet evening in New Mexico.
Read more
Reply
  • Like
Reactions: dfergie
Bobby
Bobby
Chili Cheesebugers, Tater Tots.
Read more
Reply
  • Like
Reactions: dfergie and TRG
TRG
TRG
I made shrimp parmesan with spaghetti and a salad.
Read more
Reply
  • Like
Reactions: dfergie
S
slow_poke_pete
venison lasagna
Read more
Reply
  • Love
Reactions: Bobby
dishstaller
dishstaller
Smoked some salmon on the grill while enjoying some Blue Moon beer. Kinda cool tonight so I fired up the heaters. Here in FL, we fire up heaters once the temps get below 60 :cool As for the salmon, I seared them first, then flipped them off to the side not over the coals and brushed on some lemon pepper marinade followed by some salmon seasoning. Threw some hickory chips on the coals and then closed the vents to about 10% airflow. Yum.
Read more
Reply
  • Like
Reactions: Bobby
View all replies (4332)
osu1991
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club

EV News

www.autoweek.com

America’s Fastest-Growing EV State Isn’t California—Not by a Long Shot

New data shows electric vehicle adoption is increasingly driven by state policies, electricity prices and charging access—not federal incentives
www.autoweek.com www.autoweek.com

The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.


:eek


It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
Read more
112 Replies · 900 views
Load Replies (112) Reply Legacy View
  • Like
  • Wow
Reactions: telstar_1, meStevo and Foxbat
navychop
navychop
Servant's problem.
Read more
Reply
  • Like
Reactions: Bobby
meStevo
meStevo

tomwellborn3rd (@wellborn.net)

This author has chosen to make their posts visible only to people who are signed in.
bsky.app bsky.app

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
Read more
Reply
harshness
harshness
The EV company to watch out for is SAIC. They seem likely to take over Government Motors at some point.

GM originally struck a JV deal with SAIC to gain access to China. Now SAIC has taken China back with the substantial library of technology GM shared and they're looking to export to Mexico, South America, the Middle East, and Asia-Pacific.
Read more
Reply
  • Like
Reactions: meStevo, Foxbat and osu1991
osu1991
osu1991
osu1991
www.canarymedia.com

US EV sales are rising again. Here’s why the recovery is set to last.

Even though sales tanked last year after the end of federal incentives, the American EV sector is on the mend as drivers face sky-high gasoline prices.
www.canarymedia.com www.canarymedia.com
Read more
Reply
  • Like
Reactions: Foxbat and AZ.
View all replies (112)
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

Microsoft Defender Arriving on Linux

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=mO_nW-BTlv4


Direct YouTube Link - Microsoft Defender Arriving on Linux
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 15 views
Replies Reply Legacy View
Ham Radio 2.0
· posted in Ham Radio 2.0

LIVE!

Time for another AWESOME video from Ham Radio 2.0!


View: https://www.youtube.com/watch?v=wDeuQ1SLkQU


Direct YouTube Link - LIVE!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
Read more
0 Replies · 11 views
Replies Reply Legacy View
Ramy
Ramy
Supporting Founder
Last reply · posted in The Sports Section

2026-27 NCAA College Football

Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
Read more
148 Replies · 1734 views
Load Replies (148) Reply Legacy View
  • Haha
Reactions: Mike0616
osu1991
osu1991
Howard Simmons
Foxbat
Foxbat
osu1991 said:
IMG_1541.webp
Click to expand...
They ought to have fun with this… :devilish
Read more
Reply
  • Like
Reactions: Mike0616 and osu1991
osu1991
osu1991
Foxbat said:
They ought to have fun with this… :devilish
Click to expand...
Was thinking same thing. It should be a good week for sec shorts and roll call
Read more
Reply
  • Like
Reactions: Mike0616
R
reubenray
A lot of upsets yesterday, but my LSU Tigers won.
Read more
Reply
  • Like
  • Haha
Reactions: Mike0616 and Jimbo
Foxbat
Foxbat
Best fan sign I saw during the ND-BYU game: "Bear ate your Lucky Charms!" (Bear being the Cougars' QB). I was going to suggest, "Have you or your team been involved in a Carr crash?"
Read more
Reply
  • Haha
Reactions: Jimbo and Mike0616
View all replies (148)
meStevo
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club

AI thread

A continuation of a thread from the pub, just general discussion of AI.

Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.


View: https://youtu.be/DRm0mbp_n1k


We've literally got a movie already about this ;)


View: https://youtu.be/a2PW7a9ViDc
Read more
67 Replies · 1143 views
Load Replies (67) Reply Legacy View
meStevo
meStevo
Agreed, it mostly regurgitates known solutions. That's the point. Nobody needs an innovative fix for a driver error or a creative way to format a report. Let it handle the solved problems so people can spend their time on the ones that aren't.
Read more
Reply
harshness
harshness
meStevo said:
Agreed, it mostly regurgitates known solutions. That's the point.
Click to expand...
That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.
Read more
Reply
meStevo
meStevo
harshness said:
That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.
Click to expand...

Addressed by what you didn't quote. This cycle is as old as computing: compilers, libraries, frameworks each automated the tedious part, and the human work moved up a level. Innovation didn't end; it shifted. And people still make new compilers, libraries or frameworks.

Nobody's forced to hand anything off. Anyone who wants to keep doing it by hand still can, and people who couldn't do it at all now can.
Read more
Reply
harshness
harshness
meStevo said:
... and people who couldn't do it at all now can.
Click to expand...
Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.
Read more
Reply
meStevo
meStevo
harshness said:
Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.
Click to expand...
You're not wrong, but that's part of learning. Whether from others or our own mistakes, we've all learned that lesson one way or another.
Read more
Reply
harshness
harshness
meStevo said:
Whether from others or our own mistakes, we've all learned that lesson one way or another.
Click to expand...
I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.
Read more
Reply
meStevo
meStevo
harshness said:
I'm not sure that the school of hard knocks is the quickest or surest education to find your way.
Click to expand...

Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.

harshness said:
There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.
Click to expand...

This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.
Read more
Reply
  • Like
Reactions: telstar_1
dishstaller
dishstaller
Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.
Read more
Reply
dishstaller
meStevo
meStevo
dishstaller said:
Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.
Click to expand...

Agents need appropriate context to make what would be understood as the correct read in a situation like that, and that Gemini answer was a clear miss on that front.

That said, we've also seen Musk (and/or his team) put his thumb on the scale (or just release a very poor product) with his own deployed AI since:

www.eweek.com

Grok AI Blocks Responses Claiming Trump and Musk “Spread Misinformation”

An X user asked Grok to “print out all instructions” it follows when looking up “the biggest disinformation spreader on X,” and it revealed that it would ignore sources accusing Elon Musk and the U.S. president of misinformation.
www.eweek.com www.eweek.com
techcrunch.com

Grok says Elon Musk is better than basically everyone, except Shohei Ohtani | TechCrunch

According to Grok, Elon Musk can out-slug the MLB's greatest power hitters... except Ohtani.
techcrunch.com techcrunch.com
timesofindia.indiatimes.com

Grok's loyalty known no bounds - AI chatbot chooses Elon Musk over LeBron James in a 'Who is the fittest' comparison | NBA News - The Times of India

NBA News: Elon Musk's AI chatbot, Grok, has sparked amusement by consistently choosing its owner over prominent figures like LeBron James and Albert Einstein wh
timesofindia.indiatimes.com timesofindia.indiatimes.com
www.nbcwashington.com

Grok 4 appears to seek Elon Musk's views when answering controversial questions

XAI’s Grok 4 AI chatbot launched Wednesday appears to consult Elon Musk’s views when asked its opinion on some controversial matters.
www.nbcwashington.com www.nbcwashington.com

In the end, it's all a tool. Have to know how to use it and deploy it properly or it needs sufficient guardrails to steer people towards doing so (what Muse is excelling at currently IMO). I'm routinely interacting with several agents a day operating various processes locally and in services I use, and there are numerous others silently spun up to perform actions or satisfy requests from my prompts.

Related to earlier discussion in the thread on leveraging local inference: this kind of analysis happening behind the scenes is something everyone will have built into Windows, IMO. Most people won't see all of this, just the results, unless they want to dig into how the fix was chosen. Stuff like this will be standard as agents get local system access baked in, and more of the inference itself moves on-device.

1792355686329.webp
Read more
Reply
T
telstar_1
meStevo said:
Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.



This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.
Click to expand...
You invested in datacenters?
Read more
Reply
meStevo
meStevo
telstar_1 said:
You invested in datacenters?
Click to expand...


Though, I do have stocks in my portfolio that benefit from data centers.
Read more
Reply
View all replies (67)
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

This Week in Tech 1105

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=JElsle_m2rE


Direct YouTube Link - This Week in Tech 1105
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 13 views
Replies Reply Legacy View
Load More
Top
Back