Social Feed

S
Supporting Founder
Last reply · posted in TV Shows
VOOM HD NETWORKS OCTOBER 2006 PROGRAM HIGHLIGHTS ​



FOR IMMEDIATE RELEASE – Fall into October with VOOM HD Networks, television's largest and most diverse suite of high-definition channels, where there is great TV for everyone. Available nationally on the DISH Network, VOOM HD Networks provide breathtaking content that raises television to a new level of experience. The 15 VOOM channels offer great TV made in stunning HD and 5.1 Dolby Digital surround sound, commercial free and 24-hours-a-day. Programming includes movies, sports, animation and family fare, fashion, music, art, travel, culture, video games, and news in an ever-expanding slate of new original programming. Details of the October program highlights are as follows. Photos are available to press upon request. Schedules are subject to change.


GALLERY HD--Stunning imagery and stories from the front line of the art world
Artland: USA
Premieres Thursday, Oct 12 at 8:00pm ET on DISH channel 9472
Part road movie, part treasure hunt, in this original series' first season of 12 one-hour episodes, two hosts, British architect Charlie Luxton and American travel writer Mame McCutchin cross the United States in a customized RV with a guerrilla production unit. Journeying from San Diego, California to Portland, Maine, each episode of ARTLAND: USA explores cities, towns and the most remote outposts to find American art, from masterpieces of architecture to private collections to roadside attractions.

RAVE HD—Music like you've never experienced it on TV before
Talks with Dave Fanning
Premieres Sunday, Oct 1 at 9:00pm ET on DISH channel 9470
Rave HD'snewest original series offers one-on-one half-hour interviews that give new insight and a provocative look into the work and careers of celebrated musicians. Hosted by legendary Irish radio DJ, Dave Fanning, renowned for giving U2 their first significant airplay and for hundreds of interviews with the world's most famous rock n' roll stars, the show kicks off on October 1st with Jon Bon Jovi, who discusses how his band has remained together for over twenty years, his aspiration to be on the cover of Time magazine and more. October continues with more rock legends, including Joe Elliott of Def Leppard (10/8), The Flaming Lips (10/15), Billy Joel (10/22) and The Pet Shop Boys (10/29).

RUSH HD—Life on the edge with the adrenaline junkies of adventure sports
The North Face Expedition: Shelter from the Storm
Premieres Sunday, Oct 1 at 8:00pm ET on DISH channel 9476
Take a trek to Baffin Island, located in the Canadian Artic, for a multi-sport expedition that combines extreme adventure with philanthropy. Four North Face athletes try to become the first all-female team to ski the remote and seldom visited east coast of Baffin Island. The athletes also give back to the Inuit community by renovating and working at a shelter designed for women and children escaping violent situations. The month-long expedition will be a test of survival as these courageous sportswomen battle the harshest conditions, while skiing some of the world's toughest unknown terrains. The third of Rush HD's original epic adventure specials, The North Face Expedition Series travels to some of the world's most remote and visually spectacular locations and puts the spotlight on The North Face's Global Giving Philanthropic Expedition Program, which funds and promotes overseas community-based social, environmental, and economic development projects.

SKI P.I.G. – Season 2
Premieres October 15, 22 and 29 at 8:00pm ET on DISH channel 9476
Another Rush HD original, the P.I.G series pits world-class extreme athlete against each other, as they pull out their most progressive tricks against breathtaking backdrops. P.I.G is an intense contest of one-upmanship and elimination. If you miss a trick, you get a letter – spell the word P.I.G. and you're out of the game. In this season, catch hot-shot free-skiers Nick Mercon and Travis Redd, who soar into the air as they ski the majestic Sierra Mountains of California. These pro-athletes face grueling elements such as blizzards, high winds and freezing temperatures, yet still manage to have fun and pull off mind blowing stunts.

HDNEWS—The only HD source for 24/7 news, sports, and weather
Voting Issues Hot Buttons
Airs throughout October on DISH channel 9482
With the midterm elections fast approaching, what are the concerns of the American public as we decide who to vote for in 2006. HDNews will explore in-depth, the social and economic issues that face American voters as we move toward the November elections, including the solvency of retirement funds, fuel prices and the quality of life. See an unbiased look throughout the month as HDNews pushes all the voting issue hot buttons.

TREASURE HD—The first channel for the 70 million people with a passion for collecting
Collective Intelligence - Top 20 Tips for Collecting: Halloween
Airs Tuesday, October 31 at 7:00 & 10:00pm ET on DISH channel 9473
Collective Intelligence, the series that gives viewers the 20 must-have tips to help them become successful collectors in a wide range of fields, turns to the ghoulish fun of Halloween collectibles. Whether it's Jack O'Lanterns, costumes or vintage candy containers, see what makes certain items valuable, what's hot in today's market and worth collecting and how to get the most for your collection.

EQUATOR HD—The most extraordinary places and people on the planet
World Heritage
Mondays at 8:00pm ET on DISH channel 9471
Equator HD is taking viewers to 100 locations that have been designated by UNESCO as World Heritage sites – deemed the most important cultural and natural wonders most in need of preservation and protection for future generations. In October, the series travels to five of these locations: the Historic Mosque City of Bagerhat, Bangladesh; Petra, Jordan; Hattusha, Turkey; the Sacred City of Anuradhapura, Sri Lanka and the Loire Valley in France. Take a trip around the world in breathtaking hi-def and learn about these historic and exotic locations.

ANIMANIA HD--Eye-popping HD animation for all ages
Lola & Virginia

Airs Saturdays & Sundays in October at 2:30pm and 7:30pm ET on DISH channel 9474
See new episodes of "Lola & Virginia" – This witty animated series for adolescents features twelve year-old Lola, who lives in a run down neighborhood and takes care of her irksome brothers. Lola thought she was the local princess until snooty Virginia came into town. Now the claws are out as they battle over friends, boys and clothes! This sweet comedy shows young adults how to deal with issues they face on a daily basis including friendship, jealousy and betrayal.

Erky Perky

Airs Saturdays & Sundays in October at 12:00pm and 5:00pm ET on DISH channel 9474

Follow the zany antics of two bickering, lazy, dimwitted bugs who are obsessed with finding food while trying to survive in the sterile suburban kitchen they accidentally find themselves in. After eating, their main goal in life is to find their way back to the hot dog stand that they call home! Don't miss these new episodes on Animania HD. Great for children age six and older.


ULTRA HD—Fashion, style and the "luxe" life in stunning HD
Fashion Avenue: Las Vegas and Stockholm
Premieres October 2 and 23 at 9:00pm ET on DISH channel 9478
Each week, supermodel Jodie Kidd joins up with a fashion expert and travels to the most fashionable streets around the world to shop on a budget. This month Kidd travels to Las Vegas and Stockholm, Sweden. Along with celebrity stylist Robert Arganza, who's worked with Carmen Elektra and Andrea Boccelli, they visit the hottest "strip" in town touring Las Vegas. Whether it's stopping at well known fashion venues like Armani or Jimmy Choo or trying new looks at Serge's Showgirls Wigs, Kidd shows why Vegas is a shoppers' paradise. New York and London have their SoHos. Now Stockholm, Sweden has SoFo, the area south of Folkungagatan and east of Götgatan on Södermalm. In this district, one of the capital's trendiest, Kidd along with Swedish MTV host Kicki Berg, tour Stockholm's must-see shopping hot spotswarming with small boutiques, restaurants, and cafés.

WORLDSPORT HD—Live sports coverage from premiere arenas around the globe
Live CFL (Canadian Football League)
Fridays on DISH channel 9477 - Check local listings for times
The fast-paced live action of the CFL's top weekly game continues every Friday evening. In October, the suspense begins to build as the league heads toward the playoffs in November, and be sure to mark your calendars for the Grey Cup Championship on Sunday, November 19, 2006.


Voom hd: Every movie fan's dream​

hundreds of titles for every taste, all remastered from 35mm into stunning hd​





MONSTERS HD—The masters of movie horror in terrifying HD clarity
"Halloween: The Movie" Week
Airs Oct 9-13 and the 30th on DISH channel 9481
The Halloween film franchise has been one of the most influential in horror movie history and made the character of Michael Myers so well-known that he's even been routinely spoofed in comedies. Created by John Carpenter and Debra Hill back in 1978, the series spawned what would come to be known as the "Slasher" sub-genre of horror movies that dominated the 1980's. Now you can see all 5 of the Halloween films in stunning hi-def, including the HD premieres of Halloween 2 and Halloween 3: Season of the Witch during the week of 9-13 and a day long marathon beginning on October 30. Viewers can also get "creeped" out this October with the following premieres: Creep (10/1)starring Franka Potente of "Run Lola Run" fame, Godzilla AgainstMechaGodzilla (10/14) andEmpire of the Ants (10/16) all on Monsters HD, the place for frights and chills this Halloween.

FILMFEST HD—A non-stop film festival for movie-lovers of all kinds
From Page to Screen
Airs Oct 1-12 on DISH channel 9480
Some of the best movies ever made have come from equally great books. In October, Film Fest HD celebrates classic stories that have been immortalized on celluloid with 12 days of unforgettable films. Among them, The Quiet American ('02) starring Michael Cane to Anthony Quinn's Buccaneer ('58) starring Yul Brynner; Mike Nichol's black comedy Catch 22 ('70) with a host of stars from Orson Welles and Martin Sheen to Bob Newhart; and Merchant Ivory's A Room With A View ('85) featuring Helena Bonham Carter and Daniel Day-Lewis. Additional films include: Inherit the Wind ('60), Murder on The Orient Express ('74), The House of Spirits ('93), Enigma ('82), A Delicate Balance ('73), Crimes of The Heart ('86), King David ('85), The Substance of Fire ('96) and The Manchurian Candidate ('62).

WORLD CINEMA HD—Award-winning movies and stars from around the globe
Passport to…France
Airs throughout the day Oct 14 on DISH channel 9475
Vive la France! Spend the entire day with your watching 11 great films from one of the world's movie capitals. Among the titles are the astonishing futuristic black comedy Delicatessen ('91), The Big Blue ('88) a cult-favorite about two deep sea divers, a love triangle and dolphins directed by Luc Besson (of La Femme Nikita and The Fifth Element fame) and starring Jean Reno, Rosanna Arquette and Jean-Marc Barr; The Taste of Others ('00) a comedy of manners, missed opportunities and second chances; Peter Greenaway's The Cook, The Thief, The Wife and Her Lover ('89), a controversial cannibalistic comedy that gaveHelen Mirren her first international notice; Under the Sand ('00), featuring Charlotte Rampling's acclaimed performance about a woman whose husband suddenly disappears. Other highlights include Gallic masterpieces such as Jean Renoir's French Can Can ('54), Eric Rohmer's Summer (Le Rayon Vert) ('86), Alain Resnais' My American Uncle (Mon Oncle D'Amerique) ('80), Louis Malle's Human, Too Human (Trop Humain) ('74) and Alain Cavalier's Therese ('86).


The 15 VOOM HD Networks available nationally on DISH Network are:

HDNews The only HD source for 24/7 news, sports, and weather.
Equator HD The most extraordinary places and people on the planet.
Gallery HD Stunning imagery and stories from the front line of the art world.
Rush HD Life on the edge with adrenaline junkies of adventure sports.
Rave HD Live music as a whole new experience in HD and 5.1 surround sound.
Ultra HD The hottest fashion, the coolest styles and insight into the 'luxe life from around the world.
Animania HD Eye-popping HD animation from the groundbreaking to the classic.
Monsters HD The masters of movie horror in terrifying HD clarity.
Gameplay HD Enter the virtual worlds of video gaming for the first time in HD.
Treasure HD Live auctions and original series for and about people with a passion for collecting.
World Cinema HD A passport to award-winning movies and stars from around the globe.
Worldsport HD Live sports coverage from premiere arenas around the globe.
Family Room HD Movies and entertainment for the whole family.
FilmFest HD A non-stop film festival for movie fans, remastered in HD.
Kung Fu HD All martial arts action, all the time.
6 Replies · 5031 views
riffjim4069
Thanks, just a quick look and I'll be checking out Elmer Gantry, Five Easy Pieces, The Quiet American, War and Peace.:)
S
here's october with all the schedules posted on first post.
Brajesh
The 'Equator' schedule looks like it's September's, not October. Or, am I missing something? Thanks.
S
Brajesh said:
The 'Equator' schedule looks like it's September's, not October. Or, am I missing something? Thanks.

You are correct. I requested the October version and I've got it today. Here it is. I will update the first page. Thanks for letting me know.
Brajesh
Thanks Sean. These schedules are great to have for setting the DVR :).
T
Last reply · posted in C-BAND Satellite Discussion
Howdy folks long time no write.

Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.

What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.

I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.

What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)

In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).

Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).

Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )

Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).

So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?

Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.

p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.

Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)

[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]
17 Replies · 626 views
arlo
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
B
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
S
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
B
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
Thanks for the info. I'll do a detailed feed alignment this weekend. I have to be on a ladder to tweak this 101w satellite with the MeTV mux. Luckily I've got a V8 Finder so I'll put that to use. Funny, I got the MeTV mux fine this Friday morning. Jewelry TV was completely garbled though. I'm wondering if I'm having 2 degree spacing problems more than the cell tower affecting me. Seems strange some days I'm fine and others MeTV is completely destroyed. In the old days I could just move the dish to 99w and see what's there adjacent to MeTV. Maybe if I optimize my feed I can eliminate my problem either way. I have a 9 foot spun aluminum dish that may not have the best two degree isolation. Some of these were crudely made with a poor parabolic shape. I'll keep you posted and thanks to all for the advice!
arlo
Just some rambling here. Be safe on that ladder.
Took me about 20 seconds looking at a YouTube video showing the V8 Finder in use. A spectrum analyzer display.
Well, Cool! And it can power an lnbf stand alone. More cooler.
Well there's your 5g interference wonderment solution. IF you had a spare C band lnbf. Put it on a stick and go "wardriving". If 5g towers are blowing out signals strong enough to cause interference in your dish. Well.....
And off-axis, not in the same direction as the dish is pointed? Don't exactly know.

Take a drive around and look at towers with microwave dishes bolted to them. You'll see that a large share of them do have a perimeter shield. Further diving into the likes of Andrews show shields as an optional add-on to do just what you think they should do. Block adjacent interference. Probably a good idea when multiple units are on the same, or adjacent towers. Ya' think?

Some not-so-many years ago when I dove into this whole dish antenna thing. I replaced the c/ku band corotor feed with a Titanium C2-W. Being a good boy. Assuming that the original scalar was in the proper position from day one back in the 80's. I followed instructions and stuck the unit in the hole and bolted it down at the stamped marking as per instructions. I got my first signal finally with the Zgemma H7. I was thinking "that's it?". Signal sucked.
Then I looked at how the corotor feed was located looking at the bolt marks on the tube.
It was like focusing a telescope or camera. In the end. I was getting pretty good signals. That was in the dead of winter. And I hate the cold.

A buttonhook feed support. Give a margin of adjustability versus perimeter arm scalar supports.
And a lot of reading and experimenting showed that although the scalar was probably where it should be. Isn't anymore. The focal length / fd ratio calculations probably are right. If you have a perfect parabolic dish.
Mine ain't. And its old. Most probably not a perfect parabola since it was. As well as the polar mount. Fabricated locally.
I spoke to the old guy who installed all of them here back in the heyday. Started installing Prodelin dishes.
Everyone was watching HBO and Playboy. At 3-5 grand a pop.
He told me that him and his sons made a concrete form. Finished with a plaster top coat. And started spraying resin and chopped fiberglass. Then a metal flame sprayer like is used to build up crankshafts and stuff. Finished with several more layers of 'glass. The rest. Polar mount, cast iron pole mount. Contracted locally.
That's the story. I took that old beast and if you've seen Pootie Tang. I juvenated it and then rejuvenated it.

I think that one thing to remember is that in an lnbf. All of the satellite signal amping is done in the low noise amplifier section. What signal is blown out to the coax is done in the intermediate frequency amplifier section.
So what comes in the waveguide is what it is.
I've used several receivers. Different Enigma2 images on the same receiver show different signal levels. It's a software thing. Signal calibration and display. Don't forget that. One image might not give a signal lock on a weak transponder. Fire up another? Look at the TNAP images. An option to display signal below lock.
The only real way to tell the absolute signal level you get in the house is to use a certified spectrum analyzer/service monitor.

BTW. I'm on MeTV right now. Book 'em Danno. Purposefully aimed off-axis just above the threshold of pixelation.
Only thing I see is that the sun came and the sun went. That's where I saw break up for a half hour or so.
B
Just some rambling here. Be safe on that ladder.
Took me about 20 seconds looking at a YouTube video showing the V8 Finder in use. A spectrum analyzer display.
Well, Cool! And it can power an lnbf stand alone. More cooler.
Well there's your 5g interference wonderment solution. IF you had a spare C band lnbf. Put it on a stick and go "wardriving". If 5g towers are blowing out signals strong enough to cause interference in your dish. Well.....
And off-axis, not in the same direction as the dish is pointed? Don't exactly know.

Take a drive around and look at towers with microwave dishes bolted to them. You'll see that a large share of them do have a perimeter shield. Further diving into the likes of Andrews show shields as an optional add-on to do just what you think they should do. Block adjacent interference. Probably a good idea when multiple units are on the same, or adjacent towers. Ya' think?

Some not-so-many years ago when I dove into this whole dish antenna thing. I replaced the c/ku band corotor feed with a Titanium C2-W. Being a good boy. Assuming that the original scalar was in the proper position from day one back in the 80's. I followed instructions and stuck the unit in the hole and bolted it down at the stamped marking as per instructions. I got my first signal finally with the Zgemma H7. I was thinking "that's it?". Signal sucked.
Then I looked at how the corotor feed was located looking at the bolt marks on the tube.
It was like focusing a telescope or camera. In the end. I was getting pretty good signals. That was in the dead of winter. And I hate the cold.

A buttonhook feed support. Give a margin of adjustability versus perimeter arm scalar supports.
And a lot of reading and experimenting showed that although the scalar was probably where it should be. Isn't anymore. The focal length / fd ratio calculations probably are right. If you have a perfect parabolic dish.
Mine ain't. And its old. Most probably not a perfect parabola since it was. As well as the polar mount. Fabricated locally.
I spoke to the old guy who installed all of them here back in the heyday. Started installing Prodelin dishes.
Everyone was watching HBO and Playboy. At 3-5 grand a pop.
He told me that him and his sons made a concrete form. Finished with a plaster top coat. And started spraying resin and chopped fiberglass. Then a metal flame sprayer like is used to build up crankshafts and stuff. Finished with several more layers of 'glass. The rest. Polar mount, cast iron pole mount. Contracted locally.
That's the story. I took that old beast and if you've seen Pootie Tang. I juvenated it and then rejuvenated it.

I think that one thing to remember is that in an lnbf. All of the satellite signal amping is done in the low noise amplifier section. What signal is blown out to the coax is done in the intermediate frequency amplifier section.
So what comes in the waveguide is what it is.
I've used several receivers. Different Enigma2 images on the same receiver show different signal levels. It's a software thing. Signal calibration and display. Don't forget that. One image might not give a signal lock on a weak transponder. Fire up another? Look at the TNAP images. An option to display signal below lock.
The only real way to tell the absolute signal level you get in the house is to use a certified spectrum analyzer/service monitor.

BTW. I'm on MeTV right now. Book 'em Danno. Purposefully aimed off-axis just above the threshold of pixelation.
Only thing I see is that the sun came and the sun went. That's where I saw break up for a half hour or so.
Well summing it up in one word...success! I spent about 2 hours tweaking the feed. Found I was almost 2 inches too far from the actual focal length. Plus adjusting the skew just a hair made a big difference. I measured 3 points around the dish from the edge to the outside of the scalar ring. One side measured 51 inches and the other 53, Adjusting the button hook feed I was able to get it 52 inches all the way around the dish perimeter to the scalar. I had my doubts this would fix anything but when I turned on the satellite finder I had all the channels in the MeTV mux coming in clear! No more fading away different times of the day and night. Plus the Jewelry channels are all solid also. I'm just wondering...did this just give me more signal to overcome the interference or did properly aligning the feed effectively "blocked out" the 5G interference? Sort of wondering about sidelobes in the old parabolic antenna manuals of the 80s. Just happy to have things working correctly now. Thanks to all who helped especially to Arlo who spent a lot of time commenting to me. Best regards!
primestar31
Well summing it up in one word...success! I spent about 2 hours tweaking the feed. Found I was almost 2 inches too far from the actual focal length. Plus adjusting the skew just a hair made a big difference. I measured 3 points around the dish from the edge to the outside of the scalar ring. One side measured 51 inches and the other 53, Adjusting the button hook feed I was able to get it 52 inches all the way around the dish perimeter to the scalar. I had my doubts this would fix anything but when I turned on the satellite finder I had all the channels in the MeTV mux coming in clear! No more fading away different times of the day and night. Plus the Jewelry channels are all solid also. I'm just wondering...did this just give me more signal to overcome the interference or did properly aligning the feed effectively "blocked out" the 5G interference? Sort of wondering about sidelobes in the old parabolic antenna manuals of the 80s. Just happy to have things working correctly now. Thanks to all who helped especially to Arlo who spent a lot of time commenting to me. Best regards!
Do NOT mess with it anymore just "trying to get it a tiny bit better" than you just got it... I've been through that HELL more times then I'd want to admit.
arlo
Very cool there Brown's. My intentions are good. Sometimes tact....not so much.
I'm glad you could read through the nebula of gunk.
If I can dig through my pictures directory you might pick-up a few things I've done to and made to get as perfect alignment as possible. Your journey shows how a bit of common sense and experimentation while using known guides as a starting point (at least). The phone book just isn't full of big dish service providers like way way back.

To help. A true parabola will converge all incident rays. Light, RF. At one single point. You kind of answered your question. Two inches too close/far from the convergence point (focus) degrades signal strength. If you ever get a chance to examine a telescope. The eyepiece is on a rack. You can adjust the position of the eyepiece distance from the objective. Depending on the eyepiece. The sharpest focus is only at one finely adjusted distance.
Make sense?
And for a telescope made with mirrors. The ultimate eyepiece aim. Imagining a tiny spot right in the center of the glass lens. Will be aimed exactly at the center of the mirror. A small mirror, prism, adjustment screws assists in attaining that perfect place where a star way way back in time shows as a perfect spot. Not an ellipse, etc.
Yeah.

Who knows about the 5g thing? Did your tweaks optimize where the receiver finally got enough usable DVB signal to lock onto them and reject 5g? The crowded room full of drunks thing?

Edit:
Yeah that tiny little bit can drive you nuts.The best and only way is to find a weak transponder on a sat that doesn't "swamp" signal levels. With a matching opposite polarity having close to the same signal level.
There will be a lot of tweaking with an extended arm and......thick cotton gloves. Your body, extremities, close to the lnbf will effect signals. Then just when you think you got it. In your case. Climb down the ladder and get out of the way to see what becomes.
I got obsessed and was out there in 10 degree winter on a step ladder on clear nights.
Tweaking elevation, azimuth, declination. Unbolted actuator gearbox and vice grips. Trying to get the best of the best tracking. Adding those porch rail stainless steel turnbuckles and catv messenger wire from the rim to the scalar to bring 'er back into kilter did wonders. Don't be me. Watch MeTV!
M
Last reply · posted in Over the Air Television By RabbitEars.Info
Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.
11 Replies · 568 views
primestar31
DEATH TO NEXGEN!
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
Mister B
What bothers me is the total waste of broadcasting spectrum in this very crowded market. It has been almost three years now since KFOX converted their broadcast tower to ATSC 3.0 and moved all of their channels to other towers causing noticeable degradation of the picture quality.
I have a Sony TV with 3.0 capabilities but still use the 1.0 version of locals due to the fact that one or all of the 3.0 channels are often missing or unwatchable. In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.
The only thing that could motivate me to be interested in 3.0 would be if all of the minor networks (diginets) could be in at least 720P rather than blurry ultra-compressed 480i.
Three years is long enough to waste one of the few available RF frequencies in the area for this trial.
It is time to either move on with this experiment or call it quits.
navychop
In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.

They might notice the hand going into their pocket for their wallet.
  • Like
Reactions: FTA4PA
navychop
It is time to either move on with this experiment or call it quits.

QFT. Of course, my preference involves a curb and some kicking.
  • Like
Reactions: FTA4PA
S
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
WHAT ABOUT THE INTERNET PART OF IT. NO ONE WANTS A BOX CONNECTED TO THE INTERNET EITHER.
navychop
Cough, cough. COVID vaccine implants.

:oldlaugh
  • Haha
Reactions: HIFI
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Love this guy's channel. Looks like Walmart has thrown in the towel when it comes to conventional car batteries.

I bought a new AGM battery from Walmart about a year ago, it is already needing replacing. I thought about just buying a regular battery but from what I've read, that might not be a smart move. Might check my Forscan program and see if I can change the battery type from AGM.


View: https://www.youtube.com/watch?v=awe7kY5nvdU
20 Replies · 258 views
harshness
When you need a battery, you need a battery.

If you can wait, new technologies are on the not-too-distant horizon.

You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
dishstaller
You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
Jimbo
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
And the Walmart ones mostly had very little warranty.

My last AGM (using now) I got from O Rielly's, its the Super Start ... I got the Platnium, they had several to choose from.
harshness
And the Walmart ones mostly had very little warranty.
The days of the 84-month warranty appear long gone, regardless of brand or where you acquired it. Warranties tend to be shorter, with much greater dependence on quick prorating.

The big problem for lead-acid batteries (whether flooded or AGM) is that the US no longer produces lead (the last smelter closed in 2013) and must import it.

Recycling covers a good chunk of the need (~70%), but it isn't free.
EarDemon
I've always got regular OEM Ford Motorcraft batteries from the dealership and have never really had an issue. On my old Lincoln Aviator (the SUV from the early 00s, not the CUV of today), I had some phantom drain and went though a few batteries, but that was an anomaly and with the standard warranty I got free replacements. Taking the Aviator out of the picture, I've bought two batteries in my 24 years of driving. One battery replacement in my Mountaineer, one in my Navigator. But I probably would have had another one had I kept it around longer. Didn't have the Bronco long enough, and so far still on the factory battery for my Expedition.

I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner. I'm in Buffalo, 90 degree summers and 0 degree winters. Once in a while in the dead of winter I'll get an alert from the Ford app saying remote features have been disabled to conserve battery, but it starts right up.
dishstaller
I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner.
warrior.webp
primestar31
I've always got regular OEM Ford Motorcraft batteries from the dealership and have never really had an issue. On my old Lincoln Aviator (the SUV from the early 00s, not the CUV of today), I had some phantom drain and went though a few batteries, but that was an anomaly and with the standard warranty I got free replacements. Taking the Aviator out of the picture, I've bought two batteries in my 24 years of driving. One battery replacement in my Mountaineer, one in my Navigator. But I probably would have had another one had I kept it around longer. Didn't have the Bronco long enough, and so far still on the factory battery for my Expedition.

I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner. I'm in Buffalo, 90 degree summers and 0 degree winters. Once in a while in the dead of winter I'll get an alert from the Ford app saying remote features have been disabled to conserve battery, but it starts right up.
But do you have a license plate mounted on your car? lol
EarDemon
Yes, but with smokey covers. I realize they are not a countermeasure for photos or photo radar, but it helps obscure from the average persons eyeballs. Plus with the way licensee plates peel around here, it keeps them protected from the elements.

When I went to a countermeasure meetup over the summer, one of the guys who's planning on doing a cannonball had a plate flipper. While I play fast and loose (pun intended) with these idiotic traffic laws, a plate flipper is something I wouldn't dare use. Although having one in the front to flip to no license plate when traveling though states that don't require one is tempting. Am I really going to get pulled over in Kentucky for having no front NY license plate? This way it cuts down on reflective surfaces and might be helpful with laser avoidance and gives the jammers a better chance to react especially on a larger vehicle. Although LEO is typically trained to hit headlights with their LIDAR.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68636 Replies · 2679207 views
  • Like
Reactions: c-spand
long_time_Dish
Bakers Street - Gerry Rafferty
  • Like
Reactions: gms49ers
Bobby
Bakers Street - Gerry Rafferty
Let me fix that for you:
Baker Street - Gerry Rafferty
  • Like
Reactions: long_time_Dish
EatMyVolts
The 59th Street Bridge Song -- Simon & Garfunkel
long_time_Dish
52nd Street - Billy Joel
ClarkGable
Caribbean Queen - Billy Ocean
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club
3 Replies · 33 views
Bobby
Rest in peace.
sdfntx
Sorry to hear this. R.I.P.
FTA4PA
R.I.P.
N
Last reply · posted in DISH Network Support Forum
My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?
204 Replies · 5636 views
  • Like
Reactions: charlesrshell
dishstaller
Installed an off-air antenna a couple days ago for a customer who had just cancelled his Dish service. He had a dual off-air adapter and gave it to me. Cool. I'll keep it on the truck....might come in handy. Got to admit I don't watch anything as far as live tv goes anymore. Even if we have severe weather, our local channels will have a live feed on Youtube.
navychop
In other news, it was announced that the software fix for the two tin cans and a string will not be forthcoming. A hardware fix is required. However, that fix will let you receive stations from a gazillion miles away.

Truck roll charges may apply. Two year commitment required.
brittanygarden
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks. :)
Jim5506
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks. :)
I have the dual tuner OTA adapter currently connected, but I have 2 of the single tuner OTA adapters that I can quickly connect - neither is seen by my H3.
  • Like
Reactions: charlesrshell
B
Got the dual tuner OTA adapter, was able to set it up and get back my OTA channels. Thanks to everyone and extra thanks to the DISH reps in this forum!
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 12 views
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
128 Replies · 2405 views
  • Like
Reactions: Jimbo and dfergie
rvvaquero
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
Y
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
Johnson built it, but without the Herschel Walker trade, it never happens.
  • Like
Reactions: AZ. and b4pjoe
b4pjoe
Johnson built it, but without the Herschel Walker trade, it never happens.
Jerry made himself General Manager after he bought the team but make no mistake Jimmy engineered that trade. As well as a lot of others at the time.
rvvaquero
Jimmy Johnson is a football guy. Jerry Jones is a marketer (hustler).

When I see a football player get a 15 yard penalty for unsportsmanlike conduct (like taunting) in a close game, I often wonder what he was thinking. Was he thinking, I'm doing everything I can to make this a better team and help win a championship? Or, was he saying to himself, I want everyone to notice how great I am?

Johnson inspires one, Jones the other.
meStevo
Got to unfurl and hold the flag at Allegiant for the anthem today - amazing experience.
HipKat
Balls
Bears. Gave the Pats a good beatdown.
Bucs. Got Baker back and absolutely demolished the previously surprising Panthers.
Falcons. Took care of the 49ers and did so convincingly.
Vikings. I hate them. I do. I've never seen such a bad/good team. Know what I mean? I know their D is epic. But their O is insulting. How they remain undefeated is a mystery.
Rams. Finally looked the part. Mind you against the hapless Cards.
Cowboys. Fireworks performance from their O.
Dolphins. Finally logged in a W. There won't be many. Enjoy it, Miami fans.
Browns. Still atop the AFC North.
Giants. Epic OT win with Buffalo's very own Motor Singletary finishing it off.
Seattle. Dominated KC from start to finish.

Goats
Jets. Couldn't beat the winless Dolphins. Aaron Glenn is a dead man walking.
Eagles. Injured beyond repair
Ravens and Lamar. Has he ever played a full season? Honestly, dude is fragile. Of course he's back for the Bills game.
49ers. No longer undefeated.
Colts. A sh*t show. When are they gonna realize that Daniel Jones is ass?
Steelers vs Saints game. Ass, just ass all around. Those poor people in Paris have had enough lately, and on top of that, endure that game.
Chiefs. They looked terrible. Like really bad.
Pack vs. Detroit game refs. Some of the worst refereeing I've seen in a long time. And the sample is pretty large.
TRG
TRG
Pub Member / Supporter
Last reply · posted in Local Radio Discussion
21 Replies · 623 views
dishdude
It's probably been 2 decades since I've listened to an AM radio station. Very rarely listen to FM any more.
  • Like
Reactions: reubenray and Jimbo
Jimbo
I am 1 that wants the AM to Stay ....
That said, since '08 I have had Sat radio available to me ... I think I have turned on AM 3 or 4 times, just to see if its still there.

Fwiw, if theres a Major disaster or bad weather or whatever, the chances of me finding out about it by going to the AM side of the radio is SLIM and None.
Even FM, I haven't really had on since '13ish, I may turn it on from time to time, just to see if its still there.
harshness
Fwiw, if theres a Major disaster or bad weather or whatever, the chances of me finding out about it by going to the AM side of the radio is SLIM and None.
Automation has seen to that. You can't get evening drive traffic reports where I live, much less disaster reports.
dishstaller
Very rarely listen to FM any more
That goes for a lot of people. I've been advertising on radio for more than a decade now and am very familiar with this subject. While it is still a valuable tool, it has far less impact than it did just a few years ago. The best reaction I get is from a local Country music station....they play a mix of older and newer music and have a very big footprint.
  • Like
Reactions: Mr Tony
Jimbo
That goes for a lot of people. I've been advertising on radio for more than a decade now and am very familiar with this subject. While it is still a valuable tool, it has far less impact than it did just a few years ago. The best reaction I get is from a local Country music station....they play a mix of older and newer music and have a very big footprint.
Do you do any Ad's on Satellite ?

If Not, why not, because it's not Local ?
dishstaller
Do you do any Ad's on Satellite ?

If Not, why not, because it's not Local ?
No, just regular FM stations. One is the country station I mentioned and the other is a Talk Radio station which used to get fantastic results but honestly, since the death of Rush Limbaugh, talk radio just doesn't do as well. There were two guys who had an early morning show which was hugely popular here in the southeast but one of them retired a couple years ago and the show just doesn't garner the same numbers as it used to.
S
Haven't listened AM or FM in years