Social Feed

Digital Dude
Supporting Founder
Last reply · posted in 2006 CEDIA DISCUSSION BOARD Archived
One of the things fun about this job is finding diamonds in the rough, so to speak.

Today I ran across T.S. Microtech and their HD-DVR that burns to DVD and streams HD throughout your house! If that sounds exciting, they have promised me a review sample so a full blown review will be coming (hopefully) next month.

Here is a picture of the unit.

P1010617.jpg


The unit is called the HD360 and is basically a turn-key HTPC with incredibly smart integration.

Here are the spes from their home page (www.HDeHome.com)

Features:
• HD & regular TV receiver
• View & record HDTV.
• Archive to DVD. Each DVD holds 1 hour of HD TV contents.
• 120G of harddisk. Holds 15 hours of HD TV contents.
• Transfer your favorite programs to DVD for years of enjoyment.
• S-video, Composite and audio inputs
• Up-convert all incoming video to 720p or 1080i
• 2 RF Inputs both HDTV compatible
• RGB and Component (Y-Pb-Pr) output for HD contents
• Dolby Digital 5.1 Multi-channel audio via S/PDIF
• Record to D-VHS
• Optional DVI & Firewire (1394) outputs. Adds $99.
• Plays both NTSC and PAL DVDs.
• NTSC version
• Dimension (mm): 102.8(H) x 387(W) x 413(D)

Corporte Price $999
($1099 with 2 ATSC tuners)


A visual representation of the features is here.
P1010615.jpg




A little more in-depth on the features on the poster, starting from top left and going counter-clockwise.

Bullet Proof System- Windows XP/Media center is notorious for freezing and crashing, usually when you need to restore to a previous state it's a software solution that takes precious minutes, up to 10 minutes. The HD360 features a flash memory restore that can restore the unit in 3 seconds! No more missing a program because Windows decides to crash..

Unlimited online DVD/HD storage-It's a PC at heart, you can archive on DVD or add hard drives for over a terrabyte of HDTV goodness.

No setup No monthly Fee- It's a plug and play ATSC, QAM, and NTSC recording device, without needing a phone line and paying every month to use it!

BR, HD-DVD archive- When available you can add a Blu-ray or HD-DVD burner. It comes with a dual layer burner that allows you to store 1 hour of HD on a DVD. More on that later.

Scaler- Naturally it will scale DVD or game systems to HD quality.

Multi-room Media Server- Don't let the picture fool you, it will stream HD up to 5 rooms via Cat-5e or adapters. More on that below.

FREE HD- As stated it will record ATSC, QAM, and NTSC.

Remote internet scheduling- You can log into it from anywhere to schedule recordings, like AT&T Homezone but free Hd only.

Watch one record another- The dual ATSC version is a $99 upgrade from the base package hat allows you to watch/record on 2 channels simultaneously.




So you want to know how it does HD on a standard DVD don't you? The HD360 captures the OTA HD as a .ts or .TP file. 1 hour of 1080i equals about 1 dual layer DVD. TSM has free software to download to watch the .ts file in HD via another PC with VGA-component out or via a DVD player that supports the format!

Media Server/ House distributun- TSM has adapters that plus into your electrical outlet ($59EA) or Phone outlet ($79EA) that will stream HD over Cat5 to any point in your house. They also have an upgraded version of the electric line version that is 200meg capable which can stream the HD video to up to 5 rooms in your house.

For $149 TSM sells a portable 20 Meg media player pictured below.

P1010616.jpg


You can download to it via USB and it features a VGA out with which you can use a VGA to component cable to connect it to and HDTV with component inputs.


I like it, I like it alot! The HD360 comes with a 1 year parts and labor warranty, and the only ongoing cost to use it is the electricity it consumes.


Stay tuned to Satelliteguys for an in-depth review coming soon!
10 Replies · 9749 views
Digital Dude
DirecTv had announced one last year but it died a death of no PR. I'll ask them Saturday.
H
The unit on display (not in the poster) is clearly a Shuttle computer which has the built in Firewire IEEE 1394 port as can be seen on the front panel.

It's either an Intel Based SB83G2B a SS30G2_SE or an AMD driven SK22G2.

Only the SB83G2B has a gig ethernet connection, the others have 10/100. Finding out which processor and NIC Connection it uses would narrow it down.

As the Shuttles have 1 PCI/Express slot and 1 Video slot, there would not be a place for an additional card for a satellite as the ATSC tuner(s) clearly take up the PCI slot.

EDIT: On closer inspection, its the Intel Based SB83G2B as can be seen by 3 round connectors on the front panel - the other models only have 2 - thus it does have the gig ethernet connection, PCI Express for Graphics and 1 x 32-bit PCI slot.




Shuttle XPC LGA775 Computer Barebone System SB83G2, Intel i915G Chipset, Black Aluminum G2 Chassis, Supports Dual DDR400, PCI-E, SATA, RAID, w/ GB LAN, USB 2.0 & Firewire, Silent X 250W Power Supply

This is Shuttle XPC Computer Barebone System, Shuttle Aluminum G2 Chassis, Intel i915G Chipset. It Supports Intel P4/ Celeron D LGA775 up to 3.6GHz, FSB 800/533MHz CPU, Model: SB83G2.

Features:
Silent X Technology.
Dual-CH DDR400 support.
IEEE1394 Firewire(400 Mb/s) support.
PCI Express (x16).
SATA 150 RAID 0, 1 support.

Specifications: Model: SB83G2. Color: Black. Product Type: Barebone system (No CPU, HDD or memory etc. incld.). Chassis: Shuttle - G2. Material: Aluminum. Dimension: 8" x 11" x 7" (WxDxH). Drive Bay: (1) 5.25" - exposed. (1) 3.5" - exposed. (1) 3.5" - internal. Front Panel: 2 x USB2.0, 1 x Line-In jack, 1 x Mic-In jack, 1 x H-Phone jack, 1 x Mini 1394. Rear I/O: 1 x Serial, 1 x 1394, 1 x VGA, 1 x RJ-45 Gigabit LAN, 2 x USB2.0, 1 x 6-CH Audio jacks, 1 x Line_In jack, 1 x Optical SPDIF_In, 1 x Optical SPDIF_Out, 1 x Coaxial Audio port, 1 x Clear CMOS button, 1 x PS/2 KB connector, 1 x PS/2 Mouse connector. Exp. Slots: 1 PCI Express (x16). 1 PCI. Power Supply: SilentX 250W w/ PFC. Chipset: Intel i915G + ICH6-R. CPU FSB: 800 / 533 MHz. CPU Support: Intel P4/Celeron D LGA775 to 3.6GHz. Mem. Slots: 2 x 184-pin DDR DIMM slots. Mem. Capacity: Upto 2GB max. Mem. Type: Unbuffered, Non-ECC, Dual-CH DDR400/333 (PC3200/2700) support. Audio: Realtek ALC658 6-CH audio. VGA: Intel GMA 900. Gigabit LAN: Marvell 88E8001 (1-Port). IDE: 1 x UDMA/100 IDE connector. SATA RAID: Intel ICH6-R, 2 x SATA 150 connectors. RAID 0, 1 support. IEEE 1394a: VIA VT6307 OHCI (2-port).

http://www.axiontech.com/prdt.php?item=74771
lovswr
Two ATCS tuners, huh, so PiP maybe?
S
looking forward to your review... I see it is connected to two computer monitors. How will it work on an HDTV via component? Will you still get the two tuners (pip maybe)?
Doctor Bob
Things are looking up!!! Boy I'll bet the Satellite Broadcasters are having a hissy fit... LOL
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68826 Replies · 2692003 views
  • Like
Reactions: c-spand
harshness
Lost in Love - Air Supply
EatMyVolts
You're Lost Little Girl -- The Doors
  • Like
Reactions: sdfntx
long_time_Dish
You've Lost That Loving Feeling - Hall & Oates
Bobby
You've Lost That Lovin' Feeling - Hall & Oates
FIFY
sdfntx
Going Down the Road Feeling Bad - Delaney & Bonnie
  • Like
Reactions: Bobby
"MysteryMan"
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
537 Replies · 49131 views
primestar31
I use a Beelink Mini PC, Intel 12th Gen Alder Lake- N95 running Windows 11 Pro as my Channels DVR. I only log into it when I need to, and do that with the Remote Desktop app from my personal Windows 10 laptop.

It runs Channels DVR, plus Docker Desktop and a few bridge programs used with Channels like that. It's supposed to auto-logon into my profile back into the Windows Desktop, and auto start all those things. EVERY TIME it reboots for whatever reason, usually only AFTER one of these push updates at 3am, Channels itself restarts fine, but my Docker Desktop and two bridge programs do NOT restart unintended like they should.

IF I then log into the Windows desktop using the Remote Desktop app, Docker and my bridge programs THEN engage and startup as they should.

What's wrong with my settings, so I can fix this once and for all to properly log into my profile after an automatic update reboot to bring up Windows and allow these programs to autostart as they should?
b4pjoe
I use a Beelink Mini PC, Intel 12th Gen Alder Lake- N95 running Windows 11 Pro as my Channels DVR. I only log into it when I need to, and do that with the Remote Desktop app from my personal Windows 10 laptop.

It runs Channels DVR, plus Docker Desktop and a few bridge programs used with Channels like that. It's supposed to auto-logon into my profile back into the Windows Desktop, and auto start all those things. EVERY TIME it reboots for whatever reason, usually only AFTER one of these push updates at 3am, Channels itself restarts fine, but my Docker Desktop and two bridge programs do NOT restart unintended like they should.

IF I then log into the Windows desktop using the Remote Desktop app, Docker and my bridge programs THEN engage and startup as they should.

What's wrong with my settings, so I can fix this once and for all to properly log into my profile after an automatic update reboot to bring up Windows and allow these programs to autostart as they should?
I don't use docker on my windows 11 pc but I do use Channels DVR and after updates it reverts back to the login screen and Channels DVR does not run until I login. I have been burned by this several times. How are you getting windows 11 to auto log in?
primestar31
How are you getting windows 11 to auto log in?
Apparently, I'm not, that's my problem.

The Channels DVR software can be set as a service, and that starts automatically whether anybody is logged in or not after the pc reboots. That's a choice when you first install it by checking a box. There's likely a way to bring that choice back up after it's been installed for a while, BUT, you'd have to ask them on their forum for the best way to do it as I don't remember.

Channels Community
  • Like
Reactions: b4pjoe
b4pjoe
Apparently, I'm not, that's my problem.

The Channels DVR software can be set as a service, and that starts automatically whether anybody is logged in or not after the pc reboots. That's a choice when you first install it by checking a box. There's likely a way to bring that choice back up after it's been installed for a while, BUT, you'd have to ask them on their forum for the best way to do it as I don't remember.

Channels Community
I think I tried it as a service once and it would not let me use hardware transcoding and forced it to software transcoding.
primestar31
I use a Beelink Mini PC, Intel 12th Gen Alder Lake- N95 running Windows 11 Pro as my Channels DVR. I only log into it when I need to, and do that with the Remote Desktop app from my personal Windows 10 laptop.

It runs Channels DVR, plus Docker Desktop and a few bridge programs used with Channels like that. It's supposed to auto-logon into my profile back into the Windows Desktop, and auto start all those things. EVERY TIME it reboots for whatever reason, usually only AFTER one of these push updates at 3am, Channels itself restarts fine, but my Docker Desktop and two bridge programs do NOT restart unintended like they should.

IF I then log into the Windows desktop using the Remote Desktop app, Docker and my bridge programs THEN engage and startup as they should.

What's wrong with my settings, so I can fix this once and for all to properly log into my profile after an automatic update reboot to bring up Windows and allow these programs to autostart as they should?
Ok, I just used Google A.I. to tell me how to fix all this, so I'm all set now as that makes it all easy and step by step. I changed an admin setting in gpedit so that automatic updates will download, but will prompt me for install and reboot, they aren't allowed to automatically install an reboot at 3 am anymore. I then changed my one bridge program to start via Task Scheduler instead of it's own autostart featur, so it'll log in with my Windows account after a 1 minute delay
ewindowman
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Looks like dish is Bankrupt. Filling tomorrow Tuesday June 30th
503 Replies · 18741 views
JSheridan
AT&T runs First Net which was set up so first responders have a signal almost everywhere, which is the case around here and up and down the east coast when I've been traveling. In my experience T-Mobile has the fastest network but patchy coverage while Verizon has a slow network and also patchy coverage as well. We also have a iPhone on T-Mobile and one on Mobile-X which uses the Verizon network, so comparison is easy.
EarDemon
AT&T runs First Net which was set up so first responders have a signal almost everywhere, which is the case around here and up and down the east coast when I've been traveling. In my experience T-Mobile has the fastest network but patchy coverage while Verizon has a slow network and also patchy coverage as well. We also have a iPhone on T-Mobile and one on Mobile-X which uses the Verizon network, so comparison is easy.
I did a 2500 mile round trip road trip a few weeks ago, there were a handful of places where Verizon had service and I had nothing on FirstNet. Most notably in the backwoods of Kentucky and Tennessee. Those same places I had no service on T-Mobile either. In populated areas, like the Lexington metro and Knoxville metro AT&T not only had great coverage, better than Verizon and T-Mobile generally, they have n77 everywhere. I hit 1.2 Gbps or higher pretty much everywhere, beating out the other two. That is the exact opposite here back in Western NY. Very little n77 on AT&T here and T-Mobile always rockets to 1.5 Gbps or higher.

As far as I know, there is no AT&T tower in my town. The tower I connect to when I'm outside, no service indoors, is one about 4.5 miles north of me in a different town, I can barley latch on to band 12, not 14. It's LTE only but when near that tower I exceed 200 Mbps which is phenomenal for low band LTE, but T-Mobile and Verizon have mid band on the same tower, and i'm well over a gig.

I'm looking forward to the n14 conversion and deployment of n79/4.9 GHz. Since AT&T can't sell their home internet service in NY State, I don't expect big things from them besides the enhancements to FirstNet.
Almighty1
AT&T basically went downhill as even for Internet, they were slow in offering services as AT&T WorldNet did not exist until 1994.
In 1994, the commercialization of the Internet accelerated rapidly, forcing major telecommunications giants like AT&T to compete directly with pioneering network operators like BBN (Bolt Beranek and Newman).

AT&T's Early Moves. In October 1994, AT&T launched its first public World Wide Web presence (www.att.com). However, AT&T initially lagged behind rivals in offering direct, commercial Internet backbone and access services, leading it to look for external partnerships to catch up quickly.

Having built and operated the original ARPANET, BBN formed its commercial Internet service provider (ISP) division, BBN Planet, in 1994. By the end of that year, BBN acquired regional networks like SURAnet, making it the largest provider of corporate and institutional Internet access in the United States.

Long-distance rival MCI moved faster than AT&T into commercial Internet infrastructure. Alongside Sprint, IBM, and UUNet, MCI operated one of the primary commercial Internet backbones as the government-funded NSFNET prepared for decommissioning in 1995.

Because AT&T needed immediate enterprise-grade Internet capabilities to counter MCI and Sprint, AT&T forged a major alliance with BBN Planet in mid-1995.

According to The New York Times, AT&T guaranteed BBN Planet at least $120 million in revenue over three years to supply Internet access and security services to AT&T's corporate clients, while also purchasing a minority stake in the company.

While the BBN partnership gave AT&T an immediate foothold in corporate Internet services, AT&T soon built out its own massive consumer and enterprise infrastructure, launching dial-up service AT&T WorldNet in 1996. So basically AT&T would use BBNPlanet's backbone and BBNPlanet would then use MCI's backbone for anything they didn't handle directly.

Meanwhile, GTE acquired BBN in 1997, eventually merging it into what became Verizon's network assets.

Found this online:

Only thing was I thought AT&T split into 13 Regional Bell Operating Companies and not 7 like it says.
  • Like
Reactions: charlesrshell
Bobby
Only thing was I thought AT&T split into 13 Regional Bell Operating Companies and not 7 like it says.
The 13 Regional Bell companies were pre-divestiture.
comfortably_numb
The 13 Regional Bell companies were pre-divestiture.

And of all of them, only Cincinnati Bell remains, correct?
  • Like
Reactions: charlesrshell
Bobby
And of all of them, only Cincinnati Bell remains, correct?
I believe that is correct.
JSheridan
... Since AT&T can't sell their home internet service in NY State, I don't expect big things from them besides the enhancements to FirstNet.
We're in NY and we can now. We're an AT&T retailer and have been selling AT&T Internet Air for a few months. It's $35 a month if you're an AT&T post paid subscriber, $55 a month if you're not a subscriber.
Almighty1
We're in NY and we can now. We're an AT&T retailer and have been selling AT&T Internet Air for a few months. It's $35 a month if you're an AT&T post paid subscriber, $55 a month if you're not a subscriber.
The AT&T Internet that everyone has access to is AT&T WorldNet aka att.com which is the same backbone created in 1994 that is a joke. AT&T has 3 Internet tier 1 backbones. AT&T Global Network Services formerly IBM Global Network Services (prserv.net) and AT&T Emerging Network Services, formerly (CERFNet (California Educational and Research Foundation Network) that was part of NSFNet (National Science Foundation Network). AT&T WorldNet has always been a inferior and not the same quality as the other two which are highly respected.
  • Like
Reactions: charlesrshell
Linus Tech Tips
· posted in Linus Tech Tips
0 Replies · 12 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5454 Replies · 337665 views
TRG
TRG
Breakfast for lunch. Crispy corned beef hash, home fries, two over easy eggs and sourdough toast.

1653.webp
TRG
TRG
Grabbed a burrito on the run. Beef, pinto beans, green chile and cheese. Stewart's cream soda.

burr.webp
  • Like
Reactions: Mr Tony and dfergie
dfergie
Beef, bean green chile, cheese homemade burritos here... Water
  • Like
Reactions: TRG
dfergie
Juicy Lucy jalapeño burger… Tea
  • Like
Reactions: TRG
dfergie
  • Haha
Reactions: TRG
TheRatPatrol
Last reply · posted in TV Shows
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2137 Replies · 216267 views
KAB
KAB
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
Jimbo
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
I'm curious how they are going to implement Tony into Origins (If they do) ...
Tony was introduced to Gibbs and the team, on NCIS, which makes it the Mothership side of things, he worked in Baltimore prior to NCIS, NO mention when they met that anyone had known one another ...
  • Like
Reactions: Howard Simmons
Jimbo
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
Teased Meeting ?
dfergie
I didn't recognize him till I saw this... (William Katt)

View: https://youtu.be/n9S3F87A588?si=tU_YQX6h3vDmrGEf

Good episode.
  • Like
Reactions: teachsac
dfergie
Good one, Katrina Law's daughter played the little girl.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
11 Replies · 235 views
dfergie
First rule - if you get a clue follow it immediately, 2nd - keep your stuff with you in a strange place, 3rd - pay attention to your ride... (pre first - don't go if you think you might not want to stay Rob)
teachsac
Loved the tribal🤣
  • Like
Reactions: dfergie
dfergie
Happy with the outcome, he was annoying...
dfergie
Luck or unluck of the draw, plus the others using idols and shot in the dark sealed their fate.
Christian wasted the extra vote giving it away...
K
Staff member HERE TO HELP YOU! Pub Member / Supporter Cutting Edge
· posted in DIRECTV Programming Forum
11/25 - 11/29 Thanksgiving Free Preview
515-523 Cinemax
525-542 Starz
545-556 Paramount+ with Showtime
558-560 MGM+
0 Replies · 23 views
  • Like
Reactions: RaiderPower