Social Feed

S
Supporting Founder
Last reply · posted in TV Shows
NOVEMBER 2006 PROGRAMMING HIGHLIGHTS​


ANIMANIA HD​


SPACE RACE


Take a rocket ride through stars and planets on ANIMANIA HD's "SPACE RACE" week! Watch intergalactic space heroes and villains do battle in High Definition! Our favorite red-suited Spectrum agent takes on the evil Mysterons in "Gerry Anderson's NEW CAPTAIN SCARLET." Colorful Lion Robots work together as one to defeat Lotor in "VOLTRON: THE THIRD DIMENSION." Toby Goodwin is more than just your average kid in "The Boy." He's a top secret agent who tackles dangerous missions to ensure global peace. In "DAN DARE: PILOT OF THE FUTURE" Dan Dare and his fearless crew travel the solar system and defeat alien foes in their futuristic world. Meet some friendly space creatures who have a knack for zany misadventures in "PET ALIEN"!! All this and more on ANIMANIA HD!

AIRS: Monday, November 6th through Friday, November 10th, 7p –10 EST

EQUATOR HD​

The World Heritage
Program Type: Series

One Line Description: Get access to the world's most important examples of cultural and natural heritage.

Full Description:
Equator takes you to sites designated by UNESCO as the world's most important cultural and natural wonders. Get rare access to places as unique and diverse from the Galapagos Islands of Ecuador to the ruins of the Buddhist Vihara in Bangladesh.

Significance:
First Airdate/Time: Nov 6 (Uluru-Kata Tjuta); Nov 13 (Mont St. Michel); Nov 20 (Archaeological Site of Leptis Magna, Libya); Nov 27 (Te Wahipounamu, New Zealand)Premieres @ 8:00pm & repeated episodes @ 8:30 pm


Earth Diaries

INFO TBD

FAMILY ROOM HD​


Monthly Premieres:

Time Bandits – 11/11

My Girl 2 – 11/18

The Next Karate Kid – 11/25


FILMFEST HD​


Film Fest Goes West
Let's go roping, and riding with some rowdy cowboys and gunslingers! Spend four days in the Wild West on Film Fest HD.

Featuring: RIDE IN THE WHIRLWIND, GERONIMO, DUEL AT DIABLO, VERA CRUZ, INVITATION TO A GUNFIGHTER, THE SHOOTING, THE MAGNIFICENT SEVEN RIDE!
Airs 11/1 thru 11/3

Spotlight On… Sir Alec Guinness
Featuring: HITLER: THE LAST 10 DAYS, THE MAN IN THE WHITE SUIT
Airs 11/4

Spotlight On… Sir Sean Connery
Featuring: MURDER ON THE ORIENT EXPRESS, ROBIN AND MARIAN
Airs 11/4

Spotlight On… Katherine Hepburn
Featuring: TROJAN WOMEN, A DELICATE BALANCE
Airs 11/4

Spotlight On…Gene Hackman
Featuring: Marooned
Airs 11/4

Spotlight On…Rachel Ward
Featuring: AGAINST ALL ODDS, AFTER DARK MY SWEET
Airs 11/4

Of Spies and Soldiers
From the covert operations of undercover agents to battlefield heroics by servicemen, Film Fest HD follows the action. Concludes on Veteran's Day, Nov. 11th.

Featuring: THE WAR AT HOME, A SOLDIER'S STORY, EYE OF THE NEEDLE, TOKYO JOE, BLUE THUNDER, JUDGEMENT AT NUREMBERG, PATHS OF GLORY, ENIGMA, SNIPER, IS PARIS BURNING? LITTLE NIKITA, 1941, THE QUIET AMERICAN, THE MANCHURIAN CANDIDATE, THE BUCCANEER
Airs: 11/5 thru 11/11

It Was the 90's…
Film Fest HD takes us back a decade to the nifty nineties.

Featuring: CLERKS, PI, ASYLUM, HOUSE OF CARDS, B.U.S.T.E.D, HOUSE OF SPIRITS, THE WOODLANDERS, CHILDREN OF THE REVOLUTION, CITIZEN RUTH, WIND, CELEBRITY, BLUE IN THE FACE, 24 HOUR WOMAN, OBJECT OF BEAUTY, SEEDS OF DOUBT, DEATH BY DESIGN: WHERE PARALLEL WORLDS MEET, FLIRT, THE NIGHT WE NEVER MET, AMERICAN FRIENDS, BLACK ROBE, THE JOURNEY OF AUGUST KING, THE LAST PARTY, AFTER DARK MY SWEET, ROGUE TRADER, LITTLE CITY, RITES OF PASSAGE
Airs 11/12 thru 11/30


GALLERY HD​
Artland
Program Type: Series
Full description: Artland USA is an art road movie. The adventure continues in the series' first season with our two young, knowledgeable hosts and our guerrilla production unit traveling across the United States in a customized Winnebago. Journeying from San Diego, California to Portland, Maine, they visit the country's great art treasures, roadside folk and "outsider" art, spectacular architecture and people making a rt today.

First Airdate/Time: A new episode every Thursday in November. Ep 4 – 11/2 @ 8pm; Ep 5 – 11/9; Ep 6 – 11/16; Ep 7 – 11/23; Ep 8 – 11/30
Subsequent Airdate:
Premiere Status: World
Extended Rating:

GAMEPLAY HD​

WSVG Dallas Part 1
Premieres November 1st at 10PM

WSVG Dallas Part 2
Premieres November 8th at 10PM

WSVG Dallas Part 3
Premieres November 15th at 10PM

World Series of Video Gaming (WSVG) Tournaments

The World Series of Video Games (WSVG) is the first video game competition circuit on multiple gaming platforms that culminates in final rounds at which true world champions emerge. The WSVG spans eight separate 3-5 day events that will be open to the public and will encompass 150,000 square feet of tournaments, exhibitions, concerts and other attractions, to appeal to a broad audience that includes hardcore and casual gamers. To create the ultimate circuit of competitive events, the WSVG has established partnerships with major competition leagues including CPL, Lanwar and Dreamhack, bringing together PC and Xbox game communities for the first time. The WSVG is working with these leagues to develop a set of unified rules and regulations, and to elevate competitive gaming as a sport and a profession. Sponsors currently include Intel and Xbox, with more to be announced soon.


QuakeCon Part 1
Premieres Wedneday, November 22nd at 10PM ET

QuakeCon Part 2
Premieres Wednesday, November 29th at 10PM ET

Descriptions of QuakeCon
Often described as the "Woodstock of Gaming," QuakeCon was created in August of 1996 by a group of friends on the IRC network's EFnet who had a desire to meet in person. Less than 100 attendees gathered at the Best Western in Garland, Texas that first year to play and talk games and compete in the first QuakeCon tournament. id Software's lead programmer John Carmack and several other id team members stopped by to chat with fans about DOOM, QUAKE, and the future of an up-and-coming id Software.

Going into its 11th year, QuakeCon remains true to its original mission as an event created by gamers, for gamers. Sponsored by id Software and other industry-leading software and hardware manufacturers, QuakeCon continues to be run by a dedicated group of 30 year-round volunteers and more than 200 on-site volunteers. More than 5,500 people from 52 countries around the world attended QuakeCon in 2005, and the event has expanded to include QUAKE¨, QUAKE II¨, QUAKE III Arena¨, QUAKE III: Team Arenaª, Return to Castle Wolfenstein¨, DOOM 3¨ and QUAKE 4¨.

HDNEWS​

November is the month of those all important mid-term elections where every seat in the House and one third of the Senate are up for grabs. HDNews will bring you a series of special reports "The Balance Of Power" looking at the political landscape before and after November's general elections.

Why are the mid-terms important?
At stake is control of Congress. Republicans have controlled both chambers since 1994, except for a brief time when Democrats held the Senate.
At first glance the Republicans face a discouraging political landscape with the war in Iraq going poorly, and talks of World War III. The economy is feeling the pressure of skyrocketing fuel costs, and there appears to be no plan to curb American's dependence on foreign oil. Political corruption has voters up in arms, as "flashpoint" issues such as stem cell research and same sex marriage have polarized factions within the same political partes.
There is a huge story to tell this November, and HDNews will bring it to you, all in high definition.

KUNG FU HD​



KUNG FU ALLSTARS: JET LI - Each Wednesday, catch this Martial Arts Superstar, Jet Li on Kung Fu HD

Featuring: BORN TO DEFENSE, JET LI'S THE ENFORCER, KIDS FROM SHAOLIN, LEGEND OF FONG SAI YUK, LEGEND OF FONG SAI YUK 2, SWORDSMAN 1, LEGEND OF THE SWORDSMAN AKA SWORDSMAN 2, THE MASTER

Airs 11/1, 11/8, 11/15, 11/22, 11/29

GOLDEN HARVEST MARATHON - Catch classic films from this renowned Hong Kong production house all weekend long.

Featuring: BIG BOSS AKA FISTS OF FURY, DRAGON LORD, DRAGONS FOREVER, FIST OF FURY AKA CHINESE CONNECTION, GAME OF DEATH, JACKIE CHAN'S PROJECT A, JACKIE CHAN'S PROJECT A2 WAY OF THE DRAGON, WHEELS ON MEALS

Airs 11/3 and 11/4

CELEBRATING SEQUELS- All week long watch your favorite franchises back to back on Kung Fu HD.

Featuring: 47 RONIN PART I, 47 RONIN PART II, CHINESE GHOST STORY, CHINESE GHOST STORY II, CHINESE GHOST STORY III, HEROIC TRIO, EXECUTIONERS, JACKIE CHAN'S PROJECT A, JACKIE CHAN'S PROJECT A2, KICKBOXER 3, KICKBOXER 4, THE LEGEND OF FONG SAI YUK, THE LEGEND OF FONG SAI YUK 2, THE SWORDSMAN 1, THE LEGEND OF THE SWORDSMAN, PRISON ON FIRE 1, PRISON ON FIRE 2, SAMURAI TRILOGY I, SAMURAI TRILOGY II, SAMURAI TRILOGY III, YOJIMBO, SANJURO, TIGER CAGE, TIGER CAGE 2, YOTSUYA KAIDAN Part 1, YOTSUYA KAIDAN Part 2, CHINESE CONNECTION, CHINESE CONNECTION 2

Airs 11/13 thru 11/19


BRUCE, BRUCE, BRUCE: LEE, LI, LE - Check out these movies starring Bruce Lee and the other "Bruces"

Featuring: BRUCE LEE, THE LEGEND, CHINESE CONNECTIONS, CHINESE CONNECTION 2, BIG BOSS AKA FISTS OF FURY, GAME OF DEATH, EXIT THE DRAGON, ENTER THE TIGER, IRON DRAGON STRIKES BACK, WAY OF THE DRAGON, FIST OF FURY, BRUCE STRIKES BACK, RETURN OF THE TIGER

Airs 11/15 and 11/26

MONSTERS HD​


MONSTERS GOES APE (5 FILMS)
King Kong'33, Son of Kong, Mighty Joe Young, Mighty Peking Man, King Kong '76

CHILDREN OF THE CORN WEEK (6 FILMS) 10/31 - 11/1
Children of Corn, Children of the Corn 2: Final Sacrifice, Children of the Corn 3: Urban Harvest, Children of the Corn 5: Fields of Terror, Children of the Corn 666: Issac's Return, Children of the Corn: Revelation

GRUESOME TWOSOME TUESDAYS: (4 Double Features)
Blacula & Scream Blacula Scream; Halloween 1 & Halloween 2; Mummy '32 & Mummy's Hand; Incredible Two-Headed Transplant & The Thing With Two Heads

Plus, look for the premieres of:

Candyman
Friday the 13th Part 3
Phantasm IV: Oblivion
Prophecy 2
Scream Blacula Scream
Psycho 3



RAVE HD​

Beautiful Noise
Watch the Premiere of RaveHD's new hour-long music performance series.
Filmed in front of a live studio audience in a dramatically lit,
converted gothic-style church. The series features up-and-coming artists, along
with established 'hidden gems'. It gives you a chance to discover
the featured artists' music, and to learn a little about them as well. Look for performances this month from Pilot Speed, Stefy, Kevin Breit & The Sisters Euclid.

Significance: HD/US Premiere
First Airdate/Time: 11/03/06 9p est
Subsequent Airdate: Every Friday at 9p in November
Premiere Status: HD/US

Talks with Dave Fanning
Produced exclusively in High Def for RaveHD, Talks with Dave Fanning is an intimate and provocative look into the lives and careers of music personalities past and present. Irish Broadcaster, Dave Fanning conducts one-on-one interviews in informal surroundings. Dave's guests this month will be the inventive and eclectic artist - Beck.

Significance: HD/US Premiere
First Airdate/Time: 11/5/06 9p est

Thanksgiving Night Program Block
Spend your Thanksgiving night with Sheryl Crow, Jon Bon Jovi & The Sam Roberts Band. At 8p est you can catch the premiere of the 2 hour Soundstage Special Event with Sheryl Crow recorded at Lincoln Center in NYC. Following Sheryl at 10p est will be the premiere of a Rockin' new Beautiful Noise featuring
The Sam Roberts Band. At 11p est you can visit with Jon Bon Jovi on Talks with Dave Fanning.

Significance:
HD/US Premiere of the 2hr. Sheryl & Beautiful Noise. Dave Fanning with Bon Jovi is a repeat.
First Airdate/Time: 11/23/06 8p est
Premiere Status: HD/US


Thanksgiving Night Program Block
Spend your Thanksgiving night with Sheryl Crow, Jon Bon Jovi & The Sam Roberts Band. At 8p est you can catch the premiere of the 2 hour Soundstage Special Event with Sheryl Crow recorded at Lincoln Center in NYC. Following Sheryl at 10p est will be the premiere of a Rockin' new Beautiful Noise featuring The Sam Roberts Band. At 11p est you can visit with Jon Bon Jovi on Talks with Dave Fanning.

First Airdate/Time: 11/23/06 8p est
Subsequent Airdate:
Premiere Status: HD/US
Extended Rating: TV-G

RUSH HD​

October 15th at 8PM Ski P.I.G Day 1
October 22nd at 8PM Day 2
October 29th at 8PM Day 3
November 5th at 8PM Day 4
November 12th at 8PM Day 5 /Finals w/ Pre-show Lead In & Best of shows.

November 19th at 8PM – Snow P.IG. Day 1
November 26th at 8PM – Snow P.I.G. Day 2

Ski P.I.G Season 2

An exclusive series to RUSH HD, the game of P.I.G. is an intense, yet friendly contest of one-upmanship and elimination. The rules are simple. Miss a trick—Get a letter. Spell the word P.I.G. and you're out of the game.

Pitting athlete against athlete, the P.I.G. series features the most influential extreme sport athletes, pulling their most progressive tricks against breathtaking backdrops. Featuring the top names in Snowboarding, Free-skiing, Motocross and BMX action sports, P.I.G. gives an insight into the athlete's personalities as they talk about tricks, debate strategy and do a little old-fashioned trash talking.

Ski P.I.G.
Hot Shot Free-skiers, such as Nick Mercon and Travis Redd catch some big air in the majestic Sierra Mountains of California. These pro-athletes face grueling elements, such as blizzards, wind and freezing temperatures, and still pull off amazing tricks like the Cork 900 and Daffy Double Twister Spread

Snow P.I.G.
Big name snowboarders like Marc Frank Montoya and Doran Laybourn trash talk each other on the slopes of Kirkwood Mountain and throw down some sick tricks off 75-foot jumps.


November 5th at 9PM - Focused episode 15
November 19th at 9PM – Focused episode 16
November 26th at 9PM – Focused episode 17

Focused Season 2

Episodic descriptions TBD.

November 26th at 9PM – Nomads: Moto TnT

Moto Tnt (Nomads Season 2)

Nomads will join the original madmen of freestyle motocross on their tour, TnT. Tommy Clowers and Jeff Tilton will provide the kind of humor one won't find at an event or show…the behind-the-scenes antics and lifestyle of moto riders on the road.


TREASURE HD​



Collector Showdown
Program Type: Series
One Line Description: Two dedicated collectors compete for the ultimate prize – a dream addition to their treasured collection.

Full Description:
Two dedicated collectors compete for the ultimate prize: a dream addition to their treasured collection be it sports memorabilia, Marvel comic books, Barbie dolls, or bobble heads, or a chance to meet the appointed figurehead of their obsession. But this prize is no gift. It has to be earned. Our collector's area of expertise is tested in a competition of wits, trivia and skill. Who is the true know-it-all of the two? Who is truly worthy of winning the coveted prize? The stakes are high because the prize will fulfill a wish they only dared to dream about... and they don't know what that prize is until they win...or lose.

Significance:
First Airdate/Time: 11/5 (Eps 11 & 12); 11/12 (Eps 13 & 14); 11/19 (Eps 15 & 16); 11/26 (Eps 17 & 18) – all @ 9am
Subsequent Airdate:
Premiere Status: World



ULTRA HD​



Full Frontal Fashion: Milan Spring 2007
Arrivederci Fashionistas! Full Frontal Fashion does style the Italian way. Check out the "Bella" collections from hot designers including Roberto Cavalli, Versace and Prada.


Full Frontal Fashion: Paris Spring 2007
From the City of Light and the fashion capital of the world – Full Frontal Fashion brings you the Spring 2007 collections from Paris! See the latest collections from such designers as Stella McCartney, Yves Saint Laurent and the legendary House of Dior.

Fashion Avenue: Rome
Actress and fashion expert, Iris Peynado, is the ideal guide to take supermodel Jodie Kidd around Rome's amazing Piazza di Spagna area.


Fashion Avenue: Istanbul
Fashion Editor of Turkish Marie Claire, Ece Sukan, shows supermodel Jodie Kidd around Istanbul's sensational Nisantasi shopping district and the famous Grand Bazaar.


WORLDCINEMA HD​


The Best of Germany & the United Kingdom


Featuring: BEYOND SILENCE, EAST IS EAST, THE MARQUIS OF O, TASTE OF HONEY
Airs 11/13

The Best of Japan


Featuring: DODESKADEN, HARAKARI, HIGH AND LOW, KWAIDAN, THE PICTURE BRIDE, RAN
Airs 11/14

The Best of Mexico & Argentina


Featuring: PROFUNDO CARMESI (AKA DEEP CRIMSON), VALENTIN, VIRIDIANA, WHISKEY ROMEO ZULU
Airs 11/15

CHUNGKING EXPRESS, FAREWELL, MY CONCUBINE, HAPPY TOGETHER, SUN VALLEY


WORLDSPORT HD​


LIVE Canadian Football League games on WorldSport HD

Sunday, November 5th at 3:00PM ET – Playoffs Semifinal – Teams TBD

Sunday, November 5th at 6:00PM ET – Playoffs Semifinal – Teams TBD

Sunday, November 12th at 3:00PM ET – Playoffs Semifinal – Teams TBD

Sunday, November 12th at 6:00PM ET – Playoffs Semifinal – Teams TBD

Sunday, November 19th at 6:00PM ET – Grey Cup Championship – Teams TBD


Friday Night CFL Football on WorldSport HD is the place to be for this 2006 Season. WorldSport HD will broadcast a total of 47 Canadian Football League (CFL) games. The games are LIVE every Friday night and WorldSport HD has the exclusive premiere of this gridiron coverage. LIVE Play-by-play action of the entire 2006 CFL Season. November includes Sunday afternoon playoffs, leading up to the coverage of the Grey Cup Championship.
7 Replies · 3902 views
H
Greatly appreciated!

Is there a schedule available for MONSTER HD?

Thanks.
S
No problem. Posted some highlights for November on first post. The Schedules are still there but you have to scroll all the way to the bottom.
S
Greatly appreciated!

Is there a schedule available for MONSTER HD?

Thanks.

I did not see that I was missing one. It will be up in a few.... :)
H
I hope VOOM schedules for December 2006 will become available.
S
yes, we have them but they required some work... it will be posted soon...
T
Last reply · posted in C-BAND Satellite Discussion
Howdy folks long time no write.

Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.

What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.

I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.

What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)

In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).

Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).

Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )

Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).

So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?

Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.

p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.

Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)

[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]
17 Replies · 633 views
arlo
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
B
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
S
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
B
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
Thanks for the info. I'll do a detailed feed alignment this weekend. I have to be on a ladder to tweak this 101w satellite with the MeTV mux. Luckily I've got a V8 Finder so I'll put that to use. Funny, I got the MeTV mux fine this Friday morning. Jewelry TV was completely garbled though. I'm wondering if I'm having 2 degree spacing problems more than the cell tower affecting me. Seems strange some days I'm fine and others MeTV is completely destroyed. In the old days I could just move the dish to 99w and see what's there adjacent to MeTV. Maybe if I optimize my feed I can eliminate my problem either way. I have a 9 foot spun aluminum dish that may not have the best two degree isolation. Some of these were crudely made with a poor parabolic shape. I'll keep you posted and thanks to all for the advice!
arlo
Just some rambling here. Be safe on that ladder.
Took me about 20 seconds looking at a YouTube video showing the V8 Finder in use. A spectrum analyzer display.
Well, Cool! And it can power an lnbf stand alone. More cooler.
Well there's your 5g interference wonderment solution. IF you had a spare C band lnbf. Put it on a stick and go "wardriving". If 5g towers are blowing out signals strong enough to cause interference in your dish. Well.....
And off-axis, not in the same direction as the dish is pointed? Don't exactly know.

Take a drive around and look at towers with microwave dishes bolted to them. You'll see that a large share of them do have a perimeter shield. Further diving into the likes of Andrews show shields as an optional add-on to do just what you think they should do. Block adjacent interference. Probably a good idea when multiple units are on the same, or adjacent towers. Ya' think?

Some not-so-many years ago when I dove into this whole dish antenna thing. I replaced the c/ku band corotor feed with a Titanium C2-W. Being a good boy. Assuming that the original scalar was in the proper position from day one back in the 80's. I followed instructions and stuck the unit in the hole and bolted it down at the stamped marking as per instructions. I got my first signal finally with the Zgemma H7. I was thinking "that's it?". Signal sucked.
Then I looked at how the corotor feed was located looking at the bolt marks on the tube.
It was like focusing a telescope or camera. In the end. I was getting pretty good signals. That was in the dead of winter. And I hate the cold.

A buttonhook feed support. Give a margin of adjustability versus perimeter arm scalar supports.
And a lot of reading and experimenting showed that although the scalar was probably where it should be. Isn't anymore. The focal length / fd ratio calculations probably are right. If you have a perfect parabolic dish.
Mine ain't. And its old. Most probably not a perfect parabola since it was. As well as the polar mount. Fabricated locally.
I spoke to the old guy who installed all of them here back in the heyday. Started installing Prodelin dishes.
Everyone was watching HBO and Playboy. At 3-5 grand a pop.
He told me that him and his sons made a concrete form. Finished with a plaster top coat. And started spraying resin and chopped fiberglass. Then a metal flame sprayer like is used to build up crankshafts and stuff. Finished with several more layers of 'glass. The rest. Polar mount, cast iron pole mount. Contracted locally.
That's the story. I took that old beast and if you've seen Pootie Tang. I juvenated it and then rejuvenated it.

I think that one thing to remember is that in an lnbf. All of the satellite signal amping is done in the low noise amplifier section. What signal is blown out to the coax is done in the intermediate frequency amplifier section.
So what comes in the waveguide is what it is.
I've used several receivers. Different Enigma2 images on the same receiver show different signal levels. It's a software thing. Signal calibration and display. Don't forget that. One image might not give a signal lock on a weak transponder. Fire up another? Look at the TNAP images. An option to display signal below lock.
The only real way to tell the absolute signal level you get in the house is to use a certified spectrum analyzer/service monitor.

BTW. I'm on MeTV right now. Book 'em Danno. Purposefully aimed off-axis just above the threshold of pixelation.
Only thing I see is that the sun came and the sun went. That's where I saw break up for a half hour or so.
B
Just some rambling here. Be safe on that ladder.
Took me about 20 seconds looking at a YouTube video showing the V8 Finder in use. A spectrum analyzer display.
Well, Cool! And it can power an lnbf stand alone. More cooler.
Well there's your 5g interference wonderment solution. IF you had a spare C band lnbf. Put it on a stick and go "wardriving". If 5g towers are blowing out signals strong enough to cause interference in your dish. Well.....
And off-axis, not in the same direction as the dish is pointed? Don't exactly know.

Take a drive around and look at towers with microwave dishes bolted to them. You'll see that a large share of them do have a perimeter shield. Further diving into the likes of Andrews show shields as an optional add-on to do just what you think they should do. Block adjacent interference. Probably a good idea when multiple units are on the same, or adjacent towers. Ya' think?

Some not-so-many years ago when I dove into this whole dish antenna thing. I replaced the c/ku band corotor feed with a Titanium C2-W. Being a good boy. Assuming that the original scalar was in the proper position from day one back in the 80's. I followed instructions and stuck the unit in the hole and bolted it down at the stamped marking as per instructions. I got my first signal finally with the Zgemma H7. I was thinking "that's it?". Signal sucked.
Then I looked at how the corotor feed was located looking at the bolt marks on the tube.
It was like focusing a telescope or camera. In the end. I was getting pretty good signals. That was in the dead of winter. And I hate the cold.

A buttonhook feed support. Give a margin of adjustability versus perimeter arm scalar supports.
And a lot of reading and experimenting showed that although the scalar was probably where it should be. Isn't anymore. The focal length / fd ratio calculations probably are right. If you have a perfect parabolic dish.
Mine ain't. And its old. Most probably not a perfect parabola since it was. As well as the polar mount. Fabricated locally.
I spoke to the old guy who installed all of them here back in the heyday. Started installing Prodelin dishes.
Everyone was watching HBO and Playboy. At 3-5 grand a pop.
He told me that him and his sons made a concrete form. Finished with a plaster top coat. And started spraying resin and chopped fiberglass. Then a metal flame sprayer like is used to build up crankshafts and stuff. Finished with several more layers of 'glass. The rest. Polar mount, cast iron pole mount. Contracted locally.
That's the story. I took that old beast and if you've seen Pootie Tang. I juvenated it and then rejuvenated it.

I think that one thing to remember is that in an lnbf. All of the satellite signal amping is done in the low noise amplifier section. What signal is blown out to the coax is done in the intermediate frequency amplifier section.
So what comes in the waveguide is what it is.
I've used several receivers. Different Enigma2 images on the same receiver show different signal levels. It's a software thing. Signal calibration and display. Don't forget that. One image might not give a signal lock on a weak transponder. Fire up another? Look at the TNAP images. An option to display signal below lock.
The only real way to tell the absolute signal level you get in the house is to use a certified spectrum analyzer/service monitor.

BTW. I'm on MeTV right now. Book 'em Danno. Purposefully aimed off-axis just above the threshold of pixelation.
Only thing I see is that the sun came and the sun went. That's where I saw break up for a half hour or so.
Well summing it up in one word...success! I spent about 2 hours tweaking the feed. Found I was almost 2 inches too far from the actual focal length. Plus adjusting the skew just a hair made a big difference. I measured 3 points around the dish from the edge to the outside of the scalar ring. One side measured 51 inches and the other 53, Adjusting the button hook feed I was able to get it 52 inches all the way around the dish perimeter to the scalar. I had my doubts this would fix anything but when I turned on the satellite finder I had all the channels in the MeTV mux coming in clear! No more fading away different times of the day and night. Plus the Jewelry channels are all solid also. I'm just wondering...did this just give me more signal to overcome the interference or did properly aligning the feed effectively "blocked out" the 5G interference? Sort of wondering about sidelobes in the old parabolic antenna manuals of the 80s. Just happy to have things working correctly now. Thanks to all who helped especially to Arlo who spent a lot of time commenting to me. Best regards!
primestar31
Well summing it up in one word...success! I spent about 2 hours tweaking the feed. Found I was almost 2 inches too far from the actual focal length. Plus adjusting the skew just a hair made a big difference. I measured 3 points around the dish from the edge to the outside of the scalar ring. One side measured 51 inches and the other 53, Adjusting the button hook feed I was able to get it 52 inches all the way around the dish perimeter to the scalar. I had my doubts this would fix anything but when I turned on the satellite finder I had all the channels in the MeTV mux coming in clear! No more fading away different times of the day and night. Plus the Jewelry channels are all solid also. I'm just wondering...did this just give me more signal to overcome the interference or did properly aligning the feed effectively "blocked out" the 5G interference? Sort of wondering about sidelobes in the old parabolic antenna manuals of the 80s. Just happy to have things working correctly now. Thanks to all who helped especially to Arlo who spent a lot of time commenting to me. Best regards!
Do NOT mess with it anymore just "trying to get it a tiny bit better" than you just got it... I've been through that HELL more times then I'd want to admit.
arlo
Very cool there Brown's. My intentions are good. Sometimes tact....not so much.
I'm glad you could read through the nebula of gunk.
If I can dig through my pictures directory you might pick-up a few things I've done to and made to get as perfect alignment as possible. Your journey shows how a bit of common sense and experimentation while using known guides as a starting point (at least). The phone book just isn't full of big dish service providers like way way back.

To help. A true parabola will converge all incident rays. Light, RF. At one single point. You kind of answered your question. Two inches too close/far from the convergence point (focus) degrades signal strength. If you ever get a chance to examine a telescope. The eyepiece is on a rack. You can adjust the position of the eyepiece distance from the objective. Depending on the eyepiece. The sharpest focus is only at one finely adjusted distance.
Make sense?
And for a telescope made with mirrors. The ultimate eyepiece aim. Imagining a tiny spot right in the center of the glass lens. Will be aimed exactly at the center of the mirror. A small mirror, prism, adjustment screws assists in attaining that perfect place where a star way way back in time shows as a perfect spot. Not an ellipse, etc.
Yeah.

Who knows about the 5g thing? Did your tweaks optimize where the receiver finally got enough usable DVB signal to lock onto them and reject 5g? The crowded room full of drunks thing?

Edit:
Yeah that tiny little bit can drive you nuts.The best and only way is to find a weak transponder on a sat that doesn't "swamp" signal levels. With a matching opposite polarity having close to the same signal level.
There will be a lot of tweaking with an extended arm and......thick cotton gloves. Your body, extremities, close to the lnbf will effect signals. Then just when you think you got it. In your case. Climb down the ladder and get out of the way to see what becomes.
I got obsessed and was out there in 10 degree winter on a step ladder on clear nights.
Tweaking elevation, azimuth, declination. Unbolted actuator gearbox and vice grips. Trying to get the best of the best tracking. Adding those porch rail stainless steel turnbuckles and catv messenger wire from the rim to the scalar to bring 'er back into kilter did wonders. Don't be me. Watch MeTV!
M
Last reply · posted in Over the Air Television By RabbitEars.Info
Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.
11 Replies · 569 views
primestar31
DEATH TO NEXGEN!
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
Mister B
What bothers me is the total waste of broadcasting spectrum in this very crowded market. It has been almost three years now since KFOX converted their broadcast tower to ATSC 3.0 and moved all of their channels to other towers causing noticeable degradation of the picture quality.
I have a Sony TV with 3.0 capabilities but still use the 1.0 version of locals due to the fact that one or all of the 3.0 channels are often missing or unwatchable. In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.
The only thing that could motivate me to be interested in 3.0 would be if all of the minor networks (diginets) could be in at least 720P rather than blurry ultra-compressed 480i.
Three years is long enough to waste one of the few available RF frequencies in the area for this trial.
It is time to either move on with this experiment or call it quits.
navychop
In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.

They might notice the hand going into their pocket for their wallet.
  • Like
Reactions: FTA4PA
navychop
It is time to either move on with this experiment or call it quits.

QFT. Of course, my preference involves a curb and some kicking.
  • Like
Reactions: FTA4PA
S
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
WHAT ABOUT THE INTERNET PART OF IT. NO ONE WANTS A BOX CONNECTED TO THE INTERNET EITHER.
navychop
Cough, cough. COVID vaccine implants.

:oldlaugh
  • Haha
Reactions: HIFI
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Love this guy's channel. Looks like Walmart has thrown in the towel when it comes to conventional car batteries.

I bought a new AGM battery from Walmart about a year ago, it is already needing replacing. I thought about just buying a regular battery but from what I've read, that might not be a smart move. Might check my Forscan program and see if I can change the battery type from AGM.


View: https://www.youtube.com/watch?v=awe7kY5nvdU
20 Replies · 261 views
harshness
When you need a battery, you need a battery.

If you can wait, new technologies are on the not-too-distant horizon.

You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
dishstaller
You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
Jimbo
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
And the Walmart ones mostly had very little warranty.

My last AGM (using now) I got from O Rielly's, its the Super Start ... I got the Platnium, they had several to choose from.
harshness
And the Walmart ones mostly had very little warranty.
The days of the 84-month warranty appear long gone, regardless of brand or where you acquired it. Warranties tend to be shorter, with much greater dependence on quick prorating.

The big problem for lead-acid batteries (whether flooded or AGM) is that the US no longer produces lead (the last smelter closed in 2013) and must import it.

Recycling covers a good chunk of the need (~70%), but it isn't free.
EarDemon
I've always got regular OEM Ford Motorcraft batteries from the dealership and have never really had an issue. On my old Lincoln Aviator (the SUV from the early 00s, not the CUV of today), I had some phantom drain and went though a few batteries, but that was an anomaly and with the standard warranty I got free replacements. Taking the Aviator out of the picture, I've bought two batteries in my 24 years of driving. One battery replacement in my Mountaineer, one in my Navigator. But I probably would have had another one had I kept it around longer. Didn't have the Bronco long enough, and so far still on the factory battery for my Expedition.

I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner. I'm in Buffalo, 90 degree summers and 0 degree winters. Once in a while in the dead of winter I'll get an alert from the Ford app saying remote features have been disabled to conserve battery, but it starts right up.
dishstaller
I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner.
warrior.webp
primestar31
I've always got regular OEM Ford Motorcraft batteries from the dealership and have never really had an issue. On my old Lincoln Aviator (the SUV from the early 00s, not the CUV of today), I had some phantom drain and went though a few batteries, but that was an anomaly and with the standard warranty I got free replacements. Taking the Aviator out of the picture, I've bought two batteries in my 24 years of driving. One battery replacement in my Mountaineer, one in my Navigator. But I probably would have had another one had I kept it around longer. Didn't have the Bronco long enough, and so far still on the factory battery for my Expedition.

I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner. I'm in Buffalo, 90 degree summers and 0 degree winters. Once in a while in the dead of winter I'll get an alert from the Ford app saying remote features have been disabled to conserve battery, but it starts right up.
But do you have a license plate mounted on your car? lol
EarDemon
Yes, but with smokey covers. I realize they are not a countermeasure for photos or photo radar, but it helps obscure from the average persons eyeballs. Plus with the way licensee plates peel around here, it keeps them protected from the elements.

When I went to a countermeasure meetup over the summer, one of the guys who's planning on doing a cannonball had a plate flipper. While I play fast and loose (pun intended) with these idiotic traffic laws, a plate flipper is something I wouldn't dare use. Although having one in the front to flip to no license plate when traveling though states that don't require one is tempting. Am I really going to get pulled over in Kentucky for having no front NY license plate? This way it cuts down on reflective surfaces and might be helpful with laser avoidance and gives the jammers a better chance to react especially on a larger vehicle. Although LEO is typically trained to hit headlights with their LIDAR.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68636 Replies · 2679222 views
  • Like
Reactions: c-spand
long_time_Dish
Bakers Street - Gerry Rafferty
  • Like
Reactions: gms49ers
Bobby
Bakers Street - Gerry Rafferty
Let me fix that for you:
Baker Street - Gerry Rafferty
  • Like
Reactions: long_time_Dish
EatMyVolts
The 59th Street Bridge Song -- Simon & Garfunkel
long_time_Dish
52nd Street - Billy Joel
ClarkGable
Caribbean Queen - Billy Ocean
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club
3 Replies · 35 views
Bobby
Rest in peace.
sdfntx
Sorry to hear this. R.I.P.
FTA4PA
R.I.P.
N
Last reply · posted in DISH Network Support Forum
My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?
204 Replies · 5640 views
  • Like
Reactions: charlesrshell
dishstaller
Installed an off-air antenna a couple days ago for a customer who had just cancelled his Dish service. He had a dual off-air adapter and gave it to me. Cool. I'll keep it on the truck....might come in handy. Got to admit I don't watch anything as far as live tv goes anymore. Even if we have severe weather, our local channels will have a live feed on Youtube.
navychop
In other news, it was announced that the software fix for the two tin cans and a string will not be forthcoming. A hardware fix is required. However, that fix will let you receive stations from a gazillion miles away.

Truck roll charges may apply. Two year commitment required.
brittanygarden
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks. :)
Jim5506
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks. :)
I have the dual tuner OTA adapter currently connected, but I have 2 of the single tuner OTA adapters that I can quickly connect - neither is seen by my H3.
  • Like
Reactions: charlesrshell
B
Got the dual tuner OTA adapter, was able to set it up and get back my OTA channels. Thanks to everyone and extra thanks to the DISH reps in this forum!
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 15 views
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
128 Replies · 2407 views
  • Like
Reactions: Jimbo and dfergie
rvvaquero
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
Y
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
Johnson built it, but without the Herschel Walker trade, it never happens.
  • Like
Reactions: AZ. and b4pjoe
b4pjoe
Johnson built it, but without the Herschel Walker trade, it never happens.
Jerry made himself General Manager after he bought the team but make no mistake Jimmy engineered that trade. As well as a lot of others at the time.
rvvaquero
Jimmy Johnson is a football guy. Jerry Jones is a marketer (hustler).

When I see a football player get a 15 yard penalty for unsportsmanlike conduct (like taunting) in a close game, I often wonder what he was thinking. Was he thinking, I'm doing everything I can to make this a better team and help win a championship? Or, was he saying to himself, I want everyone to notice how great I am?

Johnson inspires one, Jones the other.
meStevo
Got to unfurl and hold the flag at Allegiant for the anthem today - amazing experience.
HipKat
Balls
Bears. Gave the Pats a good beatdown.
Bucs. Got Baker back and absolutely demolished the previously surprising Panthers.
Falcons. Took care of the 49ers and did so convincingly.
Vikings. I hate them. I do. I've never seen such a bad/good team. Know what I mean? I know their D is epic. But their O is insulting. How they remain undefeated is a mystery.
Rams. Finally looked the part. Mind you against the hapless Cards.
Cowboys. Fireworks performance from their O.
Dolphins. Finally logged in a W. There won't be many. Enjoy it, Miami fans.
Browns. Still atop the AFC North.
Giants. Epic OT win with Buffalo's very own Motor Singletary finishing it off.
Seattle. Dominated KC from start to finish.

Goats
Jets. Couldn't beat the winless Dolphins. Aaron Glenn is a dead man walking.
Eagles. Injured beyond repair
Ravens and Lamar. Has he ever played a full season? Honestly, dude is fragile. Of course he's back for the Bills game.
49ers. No longer undefeated.
Colts. A sh*t show. When are they gonna realize that Daniel Jones is ass?
Steelers vs Saints game. Ass, just ass all around. Those poor people in Paris have had enough lately, and on top of that, endure that game.
Chiefs. They looked terrible. Like really bad.
Pack vs. Detroit game refs. Some of the worst refereeing I've seen in a long time. And the sample is pretty large.
TRG
TRG
Pub Member / Supporter
Last reply · posted in Local Radio Discussion
21 Replies · 628 views
dishdude
It's probably been 2 decades since I've listened to an AM radio station. Very rarely listen to FM any more.
  • Like
Reactions: reubenray and Jimbo
Jimbo
I am 1 that wants the AM to Stay ....
That said, since '08 I have had Sat radio available to me ... I think I have turned on AM 3 or 4 times, just to see if its still there.

Fwiw, if theres a Major disaster or bad weather or whatever, the chances of me finding out about it by going to the AM side of the radio is SLIM and None.
Even FM, I haven't really had on since '13ish, I may turn it on from time to time, just to see if its still there.
harshness
Fwiw, if theres a Major disaster or bad weather or whatever, the chances of me finding out about it by going to the AM side of the radio is SLIM and None.
Automation has seen to that. You can't get evening drive traffic reports where I live, much less disaster reports.
dishstaller
Very rarely listen to FM any more
That goes for a lot of people. I've been advertising on radio for more than a decade now and am very familiar with this subject. While it is still a valuable tool, it has far less impact than it did just a few years ago. The best reaction I get is from a local Country music station....they play a mix of older and newer music and have a very big footprint.
  • Like
Reactions: Mr Tony
Jimbo
That goes for a lot of people. I've been advertising on radio for more than a decade now and am very familiar with this subject. While it is still a valuable tool, it has far less impact than it did just a few years ago. The best reaction I get is from a local Country music station....they play a mix of older and newer music and have a very big footprint.
Do you do any Ad's on Satellite ?

If Not, why not, because it's not Local ?
dishstaller
Do you do any Ad's on Satellite ?

If Not, why not, because it's not Local ?
No, just regular FM stations. One is the country station I mentioned and the other is a Talk Radio station which used to get fantastic results but honestly, since the death of Rush Limbaugh, talk radio just doesn't do as well. There were two guys who had an early morning show which was hugely popular here in the southeast but one of them retired a couple years ago and the show just doesn't garner the same numbers as it used to.
S
Haven't listened AM or FM in years