Ok.. let me explain further

.
I have the motorized 75e... and then I have my 'old' 75e which is on a starband skewable mount.
I put together a non-penatrating mount that's been sitting in my yard dang near a year now and decided to shoot for Dr Dish this weekend. Now this particular non-pen was from a small company what was rolling it's own wireless connectivity between remote sites. Because of this the mast is 10' tall (see pic). I skewed the dish to 54.5, dialed in 9 degrees elevation to start with and went to work.
This got old to play with like this but I wanted to try it up there first because I figured with my low elevation to the bird (8.7 degrees) I needed all the help I could get.
This didn't pan out though...
I took the dish off and went after my sawzall. I cut the pole roughly in half, re-skewed to zero (well 90 on the dish, but you get the point), eyeballed the LNBF to 45 degrees or so and went hunting. I set the elevation as per Satfinder and didn't get a thing.
I decided to hit somehting I knew I 'could' see and use it as a point of reference. 58w here I come. I quickly locked on 58w and compared my elevation marking to what Satfinder said. It was +4 degrees.
I dialed in 12.7ish elevation and swung the dish East. There it is!
Ok... where to go from here...
I figure I can take the body off the LNBF and get it siting down in the saddle like it should. This may correct the +4 situation. It may even better illuminate the dish. This is an eliptical dish (75E) and I think it would be beneficial to skew it. Of course I'm kind of already in a 'less than optimal' situation with a universal LNBF strapped on the Primestar saddle. I just want to optimize what I've got to work with here

.
Now... Let's say I take the dish, locked on 43W and skew it 54 degrees. My effective elevation is now something in the neighborhood of 3-4 degrees and my azimuth is dorked 15-20 degrees East.
There must be a calculator for this. What really sucks is not knowing the exact Azimuth you're aiming the dish at.
See where I'm coming from?
PS - never mind the wiring around my polar mount and the motorized 75E. That was my dog's handy-work
