105, 121 birds

viqventeur

SatelliteGuys Family
Original poster
Nov 1, 2004
47
0
San Diego
Does anyone have a list of international channels available on the 105, 121 birds? I was just wondering if someone wanted AT120 and maybe an international channel, could you use a Superdish 105 or 121 instead of a second dish pointed at 61.5 or 148. Thanks.
 
viqventeur said:
Does anyone have a list of international channels available on the 105, 121 birds? I was just wondering if someone wanted AT120 and maybe an international channel, could you use a Superdish 105 or 121 instead of a second dish pointed at 61.5 or 148. Thanks.
There are no internationals on 105. 121 has nearly all the internationals that are on the wings and MANY more.

See http://ekb.dbstalk.com/dishlist.htm for the Dish Channel Chart (TNGTony's work)
That will give the complete list of channels.

JL
 
All international channels on 61.5/148 are duplicated on 121, so you wouldnt need an extra dish for int'l there. The SD 121 would do the trick :)
 
Iceberg said:
All international channels on 61.5/148 are duplicated on 121, so you wouldnt need an extra dish for int'l there. The SD 121 would do the trick :)


Unless your locals are on 105 then you'll need to use the wings. BUT, there are some intl's that are only on 121 then you need a custom solution.
 
mkm4 said:
Unless your locals are on 105 then you'll need to use the wings. BUT, there are some intl's that are only on 121 then you need a custom solution.
you can use a superdish 121 for only the international and have the superdish 105 for locals and main programming. Just hook up the fss from the 121 into the DPP-44 instead of a 61.5/148 side dish.
 
mkm4 said:
Unless your locals are on 105 then you'll need to use the wings. BUT, there are some intl's that are only on 121 then you need a custom solution.

he wasn't asking about locals, he asked about int'l. There is no int'l on 105 :)
 
Iceberg said:
he wasn't asking about locals, he asked about int'l. There is no int'l on 105 :)

But you still have to take everything into account when designing a system. :)
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)