118.7°W Anik F3 with 1.2m

[knowmiddlename]

Is there anyone solidly receiving the affiliate stations on 118.7W with a 1.2m dish? I've tweaked up everything here and still have some minor pixelation.

 

[qwert1515]

Here is a post from a while back:

118.7 Needs circular LNB in the 11700 - 12200 MHz range. If you use a linear LNB the signal will be very low.

In this thread: Circular to linear and all that jazz... we modified a linear LNB to pickup this satellite, but in the end there were only two FTA channels

 

[Mr Tony]

qwert
He's talking about C-Band...the former "Equity" channels that are left

 

[knowmiddlename]

Here is a post from a while back:

Thanks for the reply, but I'm referring to the C-band signals provided by KQCK/KQDK. These channels barely lock in this morning. Another 4-5% increase in SQ should make things stable on the CS5000 using a 1.2 meter dish.

 

[scottc98]

46Q on my 1.2m


Maybe that extra EIRP bump helps

http://www.lyngsat-maps.com/maps/anikf3_c.html

 

[knowmiddlename]

46Q on my 1.2m


Maybe that extra EIRP bump helps

http://www.lyngsat-maps.com/maps/anikf3_c.html

Thanks for pointing that out! Do you have any signal breakup? I see Ohio is in the red and Cali is in the yellow. I think another dB or two would do the trick here. Any suggestions other than getting a larger dish?