Well, I've been following all the posts regarding the 622 and audio problems hoping it would go away with software updates, however the frustration level is now reaching a new high. Again this evening while trying to listen to Fox's 24 on NY locals HD, the audio was SOOOO bad I had to switch to the SD broadcast to even make sense. I am using a Dish 500 looking at 110 and 119. The installer hooked up a second Dish 500 and single LNBF looking at 61.5. Order on the DP44 is 110, 119, and 61.5 with the signal strength on the 61.5 consistently about 94. The rest are over 100. Do I need to change the Dish to a 300? Or do I need a new 622 from DISH. Also, have had to reboot several times because of lockups and Check switch messages.
Any thoughts from the knowledgeable group on this forum would be welcome? Still much better than the Cablevision alternative, but this bleeding edge technology does sometimes leave you bleeding.
Any thoughts from the knowledgeable group on this forum would be welcome? Still much better than the Cablevision alternative, but this bleeding edge technology does sometimes leave you bleeding.