Adding Frequencies to a Bell receiver

J

Jr.nicholson

Thread Starter
New Member
May 16, 2022
1
0
Michigan
Just curious if anybody’s had any success adding additional frequencies to the Bell Receiver currently the bell receivers are only 91 and 82. We’re just wondering if anybody was able to get 110 119 or any other frequencies added to the Bell Receiver with using a WinGuard traveler auto seeking satellite roof mountain
 
harshness

harshness

SatelliteGuys Master
May 5, 2007
17,221
3,143
Salem, OR
Just curious if anybody’s had any success adding additional frequencies to the Bell Receiver currently the bell receivers are only 91 and 82.
The frequencies used on each satellite slot are pretty much the same 12.224-12.691GHz.

The show stopper with your idea is that your Bell receivers aren't authorized to receive DISH encrypted programming.

The Bell receiver firmware isn't going to direct the Trav'ler to seek out non-Bell satellites. You would need to use a conventional dish.
 
chiodo

chiodo

SatelliteGuys Pro
Pub Member / Supporter
Aug 17, 2005
574
290
Pacific NW
Yeah you can't activate a Bell Receiver to Dish and vice versa. The Receiver #'s are locked to each provider, and they wouldn't be able to activate a receiver that isn't in their database.

Atlhough the receivers are capable of receiver either signal, but of course Echostar and Nagrastar isn't going to allow that.
 

Similar threads

D
Replies
1
Views
2K
Slartibartfarst
Slartibartfarst
M
Replies
1
Views
1K
Slartibartfarst
Slartibartfarst
P
Replies
3
Views
4K
mondoguitar
mondoguitar
J
Replies
2
Views
1K
Mr Tony
M
E
Replies
1
Views
831
harshness
harshness

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

  • k.r.

Latest posts

Top