Antenna Grounding?

  • Thread starter rack04
  • Start date
  • Replies 0
  • Views 2K
Status
Please reply by conversation.
R

rack04

Thread Starter
New Member
Nov 19, 2009
2
0
Texas
I originally wanted to reply in this thread but it was too old and I didn't want to distract from the original poster in this thread.

First of all that
Great read. Thanks for the information.

I have a couple questions regarding the proper grounding of my roof top antenna. According to this picture I can run a #10 copper thhn from the antenna mast directly to the 2" rigid riser and then run #6 copper thhn from the grounding block to the system ground. Is this correct? If so, this saves me from running #10 copper thhn from the antenna mast along the roof, around the awning, and down the brick to the system ground.


702ecmCBfig3.jpg
 
Last edited:
Status
Please reply by conversation.

Similar threads

D
Replies
23
Views
20K
Foxbat
Foxbat
J
  • Locked
Replies
5
Views
2K
truckracer
truckracer
J
Replies
44
Views
2K
primestar31
primestar31
spongella
Replies
0
Views
390
spongella
spongella
silversurfer
Replies
1
Views
2K
lamarp
L

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Top