Applied Instruments XR-3

Status
Please reply by conversation.

wallyhts

SatelliteGuys Pro
Original poster
Staff member
HERE TO HELP YOU!
Lifetime Supporter
Apr 24, 2008
3,218
442
So here's what happen I ordered the XR-3 and the AXRCA module (off air) I have been doing a fair amount of antenna installs for internet customers switching over. I ordered up the meter and they sent the XR-TS2. I recall Scott from AI saying the only thing different between xr3 w/ts2 and Turbo S2 was the color screen. "The back bar is new it allows the unit to sit up" I have to send this module back but thought I would playing around and compare the 2 models.

ImageUploadedBySatelliteGuys1459047405.193959.jpg
ImageUploadedBySatelliteGuys1459047420.179673.jpg
ImageUploadedBySatelliteGuys1459047431.470136.jpg
ImageUploadedBySatelliteGuys1459047447.715401.jpg
ImageUploadedBySatelliteGuys1459047473.826073.jpg
ImageUploadedBySatelliteGuys1459047489.824043.jpg
ImageUploadedBySatelliteGuys1459047507.709611.jpg
ImageUploadedBySatelliteGuys1459047523.100071.jpg
ImageUploadedBySatelliteGuys1459047537.607720.jpg
ImageUploadedBySatelliteGuys1459047549.701873.jpg
 
So here's what happen I ordered the XR-3 and the AXRCA module (off air) I have been doing a fair amount of antenna installs for internet customers switching over. I ordered up the meter and they sent the XR-TS2. I recall Scott from AI saying the only thing different between xr3 w/ts2 and Turbo S2 was the color screen. "The back bar is new it allows the unit to sit up" I have to send this module back but thought I would playing around and compare the 2 models.

View attachment 115230View attachment 115231View attachment 115232View attachment 115233View attachment 115234View attachment 115235View attachment 115236View attachment 115237View attachment 115238View attachment 115239

Hello,
I hope you're enjoying your XR-3. Sorry it appears we appears we had shipped the incorrect module initially.

FYI - when using the "kickstand" while the XR-3 is setting on a desk or table, you'll want to fold the cordura flap under the XR-3 and fold the flap's top velcro tab around the kickstand so the kickstand will have support and won't fall down. In your photo above, the kickstand can easily slide away from the meter since it doesn't have any support. Contact me with any questions and I'll be glad to assist.

Thanks.

Scott Haywood

Applied Instruments, Inc.

5230 Elmwood Ave

Indianapolis, IN 46203

USA

Tel: 317.782.4331

Fax: 317.786.9665

Email: shaywood@appliedin.com

Website: www.appliedin.com
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)