Also having the problem of audio dropouts on certain recorded programs on the EHD. I copied the program to the 722 hard drive and had the same problem. I played around with the Digital Dolby settings today and I changed to Dolby output to PCM only. The dropouts have seemed to disappear on my recordings (primarily on Soundstage concerts recorded from Rave) but I need to test more. But I am optimistic.
Audio dropout on HD recording with 722/optical?
- Thread starter weber24601
- Start date
- Latest activity Latest activity:
- Replies 23
- Views 6K
-
ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!
Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!
We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!
If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.
THANK YOU TO EVERYONE FOR YOUR SUPPORT!
PCM only
Well, I tried this, results are similar to using RCA stereo output instead of TOSLINK, unfortunately it's not really a solution since with "PCM only" you lose DD 5.1 multichannel sound and remains limited to two channels (stereo).
Well, I tried this, results are similar to using RCA stereo output instead of TOSLINK, unfortunately it's not really a solution since with "PCM only" you lose DD 5.1 multichannel sound and remains limited to two channels (stereo).
Last edited:
Title: Microsecond Audio Dropouts
I had a 722 installed a few days ago and began noticing some very small audio dropouts. Generally not as long as a single word. I staretd to post a new thread but found this old one with similar reports except that the focus seems to be with optical linkage. I'm using HDMI and no optical. The general observations are these:
· The dropouts are consistently in the same area of the recorded program, but not at the exact same location.
· I can leave the problem area and return to it (through rewind) and the area of dropouts is still there
· I have isolated the problem to be with the 722 and/or recorded signal (not the TV)
· So far, I have noticed the problem only when watching local programming on the 118.7 satellite.
· I also have noticed short momentary (again < second) pixilation of the video but at different times and different places in the recording from the audio dropouts.
· My signal strength seems to be high - around 77-80.
The 722 replaces a 622 and I never had the problem with the 622. However, at the same time that I upgraded to the 722 I had a new 1000+ dish installed. Also the new dish added the 118.7 satellite.
My imagination has me thinking that there may be low digital information recorded on the 722 hard disc at the area of the audio dropouts. The reason for this thought is the consistency in general location but not at the exact same spot. The way that I have isolated the problem is to return to the problem area, hit rewind once (10 second rewind), and an audio dropout or two will occur, but on different words in the sentence.
I would like to know if anyone else has experienced this. I will call the DN service people out if it continues but would like more to go on. I know from past experience when I call the DN tech support they will keep me on the phone for an hour or so (including the wait time) and have me do the standard check signal, check switch, reboot, etc, and I don't believe any of this will fix the problem. If this is a problem experienced by others I at least will know to be tenacious in my efforts to have the receiver replaced.
Is there something else that I should try to isolate the problem?
I had a 722 installed a few days ago and began noticing some very small audio dropouts. Generally not as long as a single word. I staretd to post a new thread but found this old one with similar reports except that the focus seems to be with optical linkage. I'm using HDMI and no optical. The general observations are these:
· The dropouts are consistently in the same area of the recorded program, but not at the exact same location.
· I can leave the problem area and return to it (through rewind) and the area of dropouts is still there
· I have isolated the problem to be with the 722 and/or recorded signal (not the TV)
· So far, I have noticed the problem only when watching local programming on the 118.7 satellite.
· I also have noticed short momentary (again < second) pixilation of the video but at different times and different places in the recording from the audio dropouts.
· My signal strength seems to be high - around 77-80.
The 722 replaces a 622 and I never had the problem with the 622. However, at the same time that I upgraded to the 722 I had a new 1000+ dish installed. Also the new dish added the 118.7 satellite.
My imagination has me thinking that there may be low digital information recorded on the 722 hard disc at the area of the audio dropouts. The reason for this thought is the consistency in general location but not at the exact same spot. The way that I have isolated the problem is to return to the problem area, hit rewind once (10 second rewind), and an audio dropout or two will occur, but on different words in the sentence.
I would like to know if anyone else has experienced this. I will call the DN service people out if it continues but would like more to go on. I know from past experience when I call the DN tech support they will keep me on the phone for an hour or so (including the wait time) and have me do the standard check signal, check switch, reboot, etc, and I don't believe any of this will fix the problem. If this is a problem experienced by others I at least will know to be tenacious in my efforts to have the receiver replaced.
Is there something else that I should try to isolate the problem?
I too have the same audio issues as you. Local channels on the 118 sat. Mine seem to be in the exact same place every time however. Email dishquality@echostar.com . To make sure they are aware of the issue.
