Back Feeding Signal

[fchall]

I have two coa actually 3 but I'm only concerned with 2 ) coming from my dish through a DPP44. One line feeds my DVR625 The other is for a second TV in the bedroom.

In the main room I have the TV2 output from my DVR 625 and the second Coax going into a Diplexer.
The single coax from the Diplexer goes through a wall to another Diplexer in the bedroom.
The first output of the second Diplexer feeds one input to a 301.
The second output of the second Diplexer feeds directly to an input on the TV. so I can watch, in the bedroom, TV2 stuff from the DVR625 in the main room.

The question is,
If I put another DVR625 in the bedroom, could I backfeed a signal through this Diplexer set up back to the other side of the wall to the main room?

TV2 output from both DVRs going opposite directions thru the same Diplexer set up?

 

[Jared Twomey]

yes, just have to change one of the receivers to output at a different channel number so they don't interfere with each other.

 

[fchall]

yes, just have to change one of the receivers to output at a different channel number so they don't interfere with each other.

Thanks; Floyd