best sat for fta channels-SE Arizona

Status
Please reply by conversation.

klwj33

Active SatelliteGuys Member
Aug 22, 2014
18
1
Am setting up my dish and want to hit the best sat for fta channel selection. I am in SE Arizona. Thanks!!
 

FaT Air

HOA Free Zone
Feb 27, 2010
6,668
916
97W 48N
97W would be my first choices, depends on what you desire. There are others - Check Mikes lists at MPEG CENTRAL 103W cor COZI (if not available OTA in your area) would be 2nd.(but 30 inch may be too small)
97W is probably the easiest to 'hit' as its got 240+ channels. Not all are English language tho.
 

FTA4PA

Satellite Guys Family
Lifetime Supporter
Nov 13, 2013
7,632
5,962
Central Pennsylvania
Agree with Fat Air, for stationary KU it's 97W. Once you get an idea of how to set things up and make adjustments, think about adding a motor to get more sats (you won't regret it). If you make the jump to a C band dish, start at 99W, lots of good channels there and strong signal (lots more if you motorize that one). Good luck!:)
 

DJdish

SatelliteGuys Master
Feb 20, 2010
16,796
1,422
Mexico City
I agree with suggestions mentioned above. I know another member who started right next door to 97w, on 95w (Ku) Galaxy 3C, it only has 2 channels in English, your 30" dish should work just fine.
 

FTA4PA

Satellite Guys Family
Lifetime Supporter
Nov 13, 2013
7,632
5,962
Central Pennsylvania
If you haven't already, you can check out some sites like Lyngsat.com, Satbeams.com, Sathint.com to get an idea what is available ITC (In The Clear) on each satellite. They are not completely accurate as things change from time to time but still are a very good resource.:)
 

klwj33

Active SatelliteGuys Member
Aug 22, 2014
18
1
my azimuth is good--but I seem to have another problem. My traxis wont let me tune to 97w it stays on 97e- and there are no US satellites in its list of satellites. It is the traxis dbs6100hd.
 

DJdish

SatelliteGuys Master
Feb 20, 2010
16,796
1,422
Mexico City
my azimuth is good--but I seem to have another problem. My traxis wont let me tune to 97w it stays on 97e- and there are no US satellites in its list of satellites. It is the traxis dbs6100hd.

No problem, look within your sat list for option to edit or add satellite, if it´s not on the list you can add Galaxy 19 97w
 

klwj33

Active SatelliteGuys Member
Aug 22, 2014
18
1
yes I found that-and that is where it wont allow the 97w- it lets me change the numbers with a 000.0 format and the E stays constant at the end of the numbers. is that normal?
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 2)