Big dish mesh

Status
Please reply by conversation.
S

shankle

Thread Starter
SatelliteGuys Pro
Mar 10, 2010
338
0
florida
Ok , I've dismantled my 10' c/ku dish.
I have another 10' c-band dish.

I'm considering dismantling the c-band dish and cleaning it
up some and wiring the c/ku mesh to the panals of the C-band dish.
Any ideas on wire to do this? Is this feasible at all?

The c-band dish mesh holes don't look all that big compared to
the c/ku mesh. Is it possible that I don't have to go through
this provedure to get KU on the c-band dish.

Thanks for any help.
 
eurosport

eurosport

In Dave Grohl We Trust!
Supporting Founder
Mar 31, 2008
6,862
309
North Florida
Take a pencil, and put the point thru one of the holes in the mesh. If it stops before the whole diameter of the pencil goes thru, then the mesh is fine for Ku. Wiring the other mesh on, will be a total PITA as it will be wavy and won't reflect signal very good.
 
S

shankle

Thread Starter
SatelliteGuys Pro
Mar 10, 2010
338
0
florida
Thank you for responding Eurosport84.
Yes I guess I would have that problem.
Anyway the dish is now up and I have to install
the lnb, connect the wires and align the dish.
Seems the mesh is small enough for C and KU.

I am also in the North of your state. Tried to send
you an email but couldn't figure out how to do it.
 
eurosport

eurosport

In Dave Grohl We Trust!
Supporting Founder
Mar 31, 2008
6,862
309
North Florida
Just click on my username and you can send me a PM. :)
 
Status
Please reply by conversation.

Similar threads

texasclaw
Replies
7
Views
7K
dodge
dodge
mastergian
  • Locked
Replies
3
Views
1K
Diamond Jim
Diamond Jim
B
Replies
2
Views
659
ken2400
ken2400
jmc98
Replies
37
Views
4K
voomvoom
voomvoom
Semokid
Replies
10
Views
1K
Anole
Anole

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Top